Pedals - Import export

INDOOR DUSTBIN WITH PEDAL 1002 PRODUCT CODE:1002 DIEMENSIONS HEIGHT:28 CM WIDHT:21 CM

Hydraulically actuated controlling equipment, for example in - Construction and drilling vehicles - Cranes and excavators - Wheel loaders and lifting platforms - Railway Vehicles are controlled to an increasing degree electronically nowadays. Especially for these applications (under consideration of extreme operating conditions) our pedal actuated transmitters of series FS2000 were designed for. They contain wearless magnetic control systems in redundant version for security-relevant applications according to IEC 61508 (for example SIL2) with analogue or digital signal output.

With its flat construction this force sensor is specially designed to be fitted to a pedal. By this, the operator's forces for each respective action, for example brake tests, can be measured directly and the reaction of the vehicle or machine can be designated. This applies to real test drives, as well as in driving simulators. Due to the special construction of the membrane, it is irrelevant whether an upright or hanging pedal is concerned. The sensor is designed in a way that unavoidable lateral forces have as little impact on the measurement result as possible. Using a central internal thread on the control surface, various machine-related adaptor parts can be easily mounted. Because the pedal is convex-shaped on its surface, the pedal force sensor has a very rigid base plate and therefore can easily be applied to various geometrics. The mounting can even take place on a pedal with an elastomer covering.

Stainless steel pedal bin with soft-close lid. With removable inner bucket. Capacity: 5 litres. • Stainless steel pedal bin with anti-fingerprint coating • Secure stand and corrosion protection thanks to all-round plastic base • Silent closing lid • Integrated carrying handle on lid hinge • Bin bag held in place by rubber ring • Removable inner bucket with handle, capacity: 5 litres

Body and cover, each of which is printed in one piece with high-density polyethylene(HDPE) injection method, with a warranty certificate and certificate. -Fully recyclable, resistant to violet and infrared rays, acids, and alkalis, and high and low air temperatures. On the sides of the chamber, there are four handles, two on the side and two on the back, which is strengthened with channels. -A flat lid that is mounted on the back of the container with a hinge from one end to the other and can be opened manually thanks to the through handles on the front. -DIN 30700 male attachment with stamped lifting grooves on the front edge of the container and no cutting edges or sharp corners. Also available with “Trento” and Ochsner-type attachments.

Volume: 100 L Dimensions: 760 x 450 x 545 mm Weight: 7 KG ( +/-5%) Body and cover with warranty certificate, produced by injection system using high-density polyethylene(HDPE). Temperature resistant: -30"C to +8O°C The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. - There is foot pedal mechanism.

Volume: 120 L -Dimensions: 925 x 465 x 580 mm -Loading Capacity: 60 Kg -Weight: 7,5 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: -30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products

High quality stainless steel pedal bin for using in Industiral areas. The pedal and pedal connection parts made by moulding iron and it helps for using for long time.

5 LT PEDAL BIN. MADE BY 430 QUALITY STAINLESS STEEL. PEDAL AND PEDAL CONNECTION PARTS ALSO MADE BY STEEL. WITH THESE STRONG PARTS THE PRODUCT HAS LONG TIME USE LIFE.

These parts used in Surfboard accessories.

Pedal valves with foot actuation. Available with protection or without protection cover in the functions 3/2 and 5/2, also with latching. Stable stand and safe use thanks to the wide base.

Application: Motor Management Electronic pedal sensor modules comprise of an accelerator pedal, angle sensor, and mechanics for simulating the driver's traditional sense of the accelerator pedal. When the accelerator pedal is pressed down, the pedal sensor transmits information to the control electronics. Based on this information, the position of the throttle valve is calculated. Automotive-Applications.pdf For more information please contact: automotive@novotechnik.de, +49 711 4489-222

MANUAL BOXES AND REEL LIFTER FP PS 04 - LOAD 400 kg Compact and easy to handle manual forklift equipped with hydraulic foot pump and large diameter polyurethane wheels for high smoothness (two fixed and two steering complete with brakes). It is supplied with 650 mm long loading forks. The lifting pedal can be positioned vertically to reduce its overall dimensions and the descent is controlled by a valve with handwheel.

The stapler SERIES MPK are designed for the closure of the sides of the cartons and the construction of trays and containers. Available in mechanical version (mod. M), pneumatic (model B) and stitched at 45° (K). These staplers are suitable if you need to prepare packages in different areas and in small quantities. When you need to close 50 to 100 packages it is advisable to use a pneumatic stapler. The models use MPK points series 16B coppery length 12,15,18 mm (charger 300 points). On request it is available the model that uses the series 35 points coppery length 15,18,22,24 mm, charger 200 points). The length of the arm varies from 340 mm to 1000 mm depending on the model.

Stapler BOTTOMER designed for closing the bottoms of the cardboard boxes. Available in mechanical (mod. MB) and pneumatic (mod. PB) versions. These staplers are suitable for small quantities or if you need to prepare the packaging in different areas. If you have to close 50 to 100 packages we recommend the use of a pneumatic stapler. Models MB and PB can use bar staples with width mm. 35 and depth mm. 15-19-22 Code points used: BT 35 in bar

Rotary table diameter mm. 1000 mm. 2400 Capacity: from 1000 kg to 3000 kg Height from the ground: mm. 80 to mm. 500 Turntable with recess for pallet truck insertion. STRETCH FILM FOR MANUAL USE: The film normally used to manually wrap the pallets is 23 my, standard coils from about 5 kg. The white stretch film 30 my, is suitable to protect the contents of the pallets from sunlight. The white film is opaque. Can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and problems caused by use of an unsuitable product.

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

Semiautomatic table top sealer with electric pedal and impulse sealing bar (resistance is heated for a few seconds), suitable for closing bags of plastic material heat-sealable. The closing of the sealing bars by pressing the pedal electric with solenoid allows the operator to have both hands free and for increased production, just select the automatic cycle with timed closure. The timers for adjusting the welding and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. Maximum thickness. weldable 0.20 mm. (0.40 mm. Overall)

MECHANICAL CUTTING MACHINE FPE2-EURO M - EURO-HOLE The FPE2-EURO M die-cutting machine is a simple and safe machine with a sturdy steel structure that allows the realization of a 32 mm hole in cardboard, blister, plastic, leather, etc. with thickness up to 3 mm. The punch is easily replaceable and is equipped with a rubber extractor device to facilitate the extraction of the scrap. Operation is manual by mechanical pedal. The punch is an element subject to wear and must be replaced periodically.

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.

Digital and semiautomatic bench sealer, with electric pedal and sealing bars at constant temperature, for closing polypropylene bags and laminated / laminated aluminum, paper, barrier materials, etc. The "hot bar" type sealing bars are equipped with resistance and electronic thermoregulator. Thanks to the new latest generation electronic control card, all controls, adjustments and alarms are more easily set. The digital control of temperature, time and pause interval, it is more precise and functional, thanks to the new control panel, and to the large 1-line by 16-character alphanumeric LCD display. Temperature adjustment 0-150 ° C, with alarm of ± 5 ° C with respect to the set temperature. The closing of the bars takes place by means of an oversized electromagnet which guarantees a high sealing pressure and allows the sealing of high thickness envelopes with or without side gussets. For a higher production it is sufficient to select the automatic cycle with timed closing.

Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows.

Quantity per package: 20

Quantity per package: 40

1,3x1,1m Pallet

Hazardous Waste Bucket Yellow Color. With hazardous waste sticker. Pedal.