Pallet storage - Import export

The most popular MPbox in pallet size 1000x1200mm. For return logistics: 16 boxes per pallet space. Storage: 40 boxes per pallet space. Just send us an email at sales@zamko.eu to receive our Brochure with the full range of MP Boxes. Compared to other solutiuons Compared to other Mobilrack or Big bag frames or holders, the MP Multibox has two large advantages: No risk of swinging during transport when the truck is cornering or braking. Better side protection of the content of your big bag. Stacking 5-high with 5.000kg The four walls of the MP Mulitbox are not only holding the big bag in its proper shape, also using the MPbox system you can stack the big bags 5 high (with a maximum of 5x 1.000kg) in your warehouse. No racking system is necessary. Doubling your truck capacity During transport of your big bags in a MP Multibox you can stack them 2-high, to use the maximum of the cargo space and saving on transport cost. With two of our 110cm high MP Multibox

SUITABLE SURFACES All types of tapered-edge, paper-lined plasterboard, with or without insulation (glass wool, rock wool, polystyrene). COVERINGS First undercoat for plasterboard. Smoothing compound. PACK SIZE Tubs of 5 and 25kg on covered pallet. STORAGE 9 months in unopened original packaging, away from frost and extreme heat. AMOUNT REQUIRED Approximately 500 g/m² of plasterboard. DRYING TIME The second coat can be applied 24-48 hours after the first, depending on the ambient conditions. RECOMMENDED APPLICATION Always leave a minimum gap of 20 cm between doors and windows and the first plasterboard joint.

TECHNICAL DEFINITION Multi-purpose filler for interior use. • Filling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates: plaster, plasterboards, plaster blocks, concrete, cement rendering,concrete blocks, aerated concrete, brick, earthenware, TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard NFT 30 608 • pH : neutral • Setting starts after 50 minutes • Setting ends in 1 hr 10 min • Bending : 3 N/mm2 • Compression : 7 N/mm 12 kg buckets on wrapped pallet. STORAGE 9 months in original unopened packing protected from damp. THE TEMPERATURE DURING APPLICATION AND DRYING MUST BE SUPERIOR TO 5°C. DO NOT USE ON A DAMP SUBSTRATE. DO NOT USE ONCE THE PASTE HAS STARTED TO SET.

TECHNICAL DEFINITION CE 78 PERFECT’LIGHT is a lightweight ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants. The paste is white. COVERINGS. Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 20 kg buckets on covered pallet. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape Then add a finishing coat, allow to dry and finish to hide the tape. Also hide the screw heads. For projecting vertical edges, use reinforced tape.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates (rough precast concrete, for instance). COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Interior walls and ceilings: Bubble concrete, bare concrete, cellular concrete, irregular plaster, heating ceiling, uneven surfaces, etc. OVERLAYING After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper or wall coverings. TECHNICAL CHARACTERISTICS • Granulometry : Up to 0.2 mm • Adhesion : complies with NFT 30 608 • pH : neutral PACK SIZE 5 and 25 kg bags on shrink-wrapped pallet. STORAGE 9 months in unopened original packaging stored away from moisture. PREPARATION OF SURFACES Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.

This ultra-light and ergonomic nestable pallet has 9 feet and is sustainable and export friendly. Pallet developed for lightweight applications. Due to the limited height of the pallet optimisation in transport and storage is maximal.

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin.

For very high loads Easy installation in pallet racks Supports ergonomic posture of employees Sturdy steel construction for long service life Easy-Action handle recommended for heavy loads

Order here customized warehouse labels for pallet racks, high racks, floor storage, block storage, aisles and loading ramps etc. made of plastic as well as metal. With individual text, numbering, barcode, logo, symbols etc. Among other things, also suitable for forklift trucks, for hanging, for fixing to the floor or self-adhesive.

FOR VARIOUS INDUSTRIES AND A VARIETY OF APPLICATIONS LIPP bulk silos are being used from a variety of industries and companies for different applications. Since decades, LIPP silos are used for the storage of grain in flower mills or as storage for animal feed in the agricultural sector. Also the furniture and wood industry is using LIPP silos to store wood chips or saw dust. ADVANTAGES OF LIPP BULK STORAGE A growing application is the storage of pallets for biomass plants. Different manufacturing companies are using LIPP bulk material silos as storage of buffer for their raw materials. The enhanced stability coming from the Double Fold System allows to construction of silos with big diameter and height ratio, with free carrying roofs as well as a fast filling and extraction. The silos can be built in closed manufacturing halls or building, very narrow installation sites and on high steel or concrete structures.

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Produced on request for a minimum order quantity of: 3x190 = 570 units. Grid dimension at the base: 5x5mm Grid dimension on the walls: 15x15mm

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Produced on request for a minimum order quantity of: 3x190 = 570 units. Grid dimension at the base: 5x5mm

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Produced on request for a minimum order quantity of: 5x120 = 600 units. Grid dimension on the walls: 15x15mm

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Grid dimension on the walls: 15x15mm.

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.).

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Grid dimension on the walls: 15x15mm

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Produced on request for a minimum order quantity of: 4x145 = 580 units

1,3x1,1m Pallet Suitable for transport and storage of a wide range of products (bread, pastry, cheese, meat, hamburgers, pasta, fruit, vegetables,etc.). Produced on request for a minimum order quantity of: 4x145 = 580 units. Grid dimension at the base: 5x5mm Grid dimension on the walls: 15x15mm

With our volume trucks we offer transports up to 120m3. We perform all such volume transports with ADR equipment with tandem 6.5 + 9 m (15.4 LDM – 38 pallet positions) and internal height up to 3 m. Our daily truck route is D-70 Stuttgart and D-85 Ingolstadt. Our Volume transport trucks MAN Interior dimensions of the cargo area: Length: 13.60 meters Width: 2.48 meters Height: 3.00 meters Payload: 26.000 kg 34 Euro pallet storage positions VOLVO Interior dimensions of the cargo area: Length: 13.60 meters Width: 2.48 meters Height: 3.00 meters Payload: 26.000 kg 34 Euro pallet storage positions

Thirty years of expertise in Dry Ice blasting and production, with cooperation at university level and applications in a wide range of business areas: we put all of this at your service. Extend the lifespan of tire molds with non-abrasive blasting methods to preserve the external appearance of new or retreaded tires – curing after curing. Ultra-sonic nozzles are custom engineered for complex patterns, including spring vent inserts. Blast away vulcanized rubber using 100% pneumatic or electropneumatic Dry Ice blasting units, manual or robot-operated. Produce Dry Ice blocks, pellets, micropellets, flakes or dust; store and transport them; protect your workers: we can offer you everything you need for Dry Ice. Dry ice blaster Dry ice accessories Dry ice accessories Dry ice pelletizers (micro pellets); Dry ice pallets storage boxes; Ultrasonic dry ice blasting nozzles (custom design and development); Standard dry ice blasting nozzles (bi-tube)

Warehouse pallet and shelving storage rack High grade steel sabik Capacity:500kg-4000kg per shelf Assembled freely and Warehouse pallet and shelving storage rack The heavy type of pallet rack is the most cost effective storage system with the lowest equipment and capital costs. It provides direct access to all pallets for 100 % accessibility and good stock rotation

STORETECH LONGSPAN SHELVING Longspan shelving is designed for warehouses where goods are deposited and removed manually from shelves. This system also make optimal use of warehouse height, as the higher levels can be accessed mechanically by devices that lift the operator to the required height (stacker cranes or order picking forklift trucks) or via gangways located between shelves It is also common practice to set up a mixed warehouse of picking and pallet storage, where the top shelves are used to keep palletised stock reserve and the bottom is intended for picking

Wooden crates is one of the wooden box which provide ability to carry your stuff with better conditions.Wooden packaging crates which is also known the wood storage crates that offer the find more spaces in your storage with well organized looking.Wood Crate and pallet crate are able to organize you goods better for shipment process.Wooden packing crates provide safety during the transportation process,it eliminates vibraton and damages to your delicate goods. It can be used many different sectors for different business purposes to keep your goods safe during the transportation and mobility process.As plus packing company, we customize the wood crates based on our valuable customer demand. Wooden Crates Features .Wooden crate are able turn into a mobile storage option. .Pallet crates can be pulled and carry easily from the sidesç .Crates organize every clutter stuff in your storage. .Wood crates ensure more spaces in your storage

In the aviation industry, there is an increasing trend towards larger and larger monolithic structural components. The ECOSPEED series, featuring a horizontal spindle and a vertical pallet arrangement, has been specially developed for highspeed machining of these large structural aluminum components. A pallet transport system feeds pallets to the machine, the storage station and the loading/unloading station. The innovative Sprint Z3 parallel kinematic machining head, provides the user with the optimum 5axis simultaneous machining process. At a maximum cutting volume of up to 8,000 cm3/min, the machine concept is the world's most productive solution for cutting aluminium structural components, drastically cutting both production times and costs.

World Class Storage Service Offering world-class B2B, B2C and value-added logistics services in an area of 140 thousand square meters, Sertrans offers world-class storage services with customized and flexible solutions. With more than 30 years of industry experience, expert team and strong infrastructure, Sertrans adds convenience to your business and value to your business. Industry-Specific Storage Solutions Sertrans supports your trade with ready-made or tailored storage solutions. Thanks to its expert team trained in the relevant field and its strong technical infrastructure, Sertrans enables you to keep your costs under control by continuously improving your operations and is your reliable solution partner for always getting perfect service. 140.000 m2 total storage area 62,500 m2 free warehouse - mezzanine area 21.000 m2 free warehouse - area with pallets 10.000 m2 warehouse Storage Solutions Inventory Management, Online transactions with ERP-WMS integration,

can be moved by fork-lift truck, platform floor truck or crane, the tulip shape of the feet gives the pallet stack stability galvanised or painted

-sturdy steel construction -storage of 4 or 8 forks each pallet, max. cross section forks 180 x 90 mm -securing of the fork sleeves apart (GZP 4) or by pairs (GZP 8) -through runners for storage in pallet shelves -pick-up on all sides for forklift truck an pallet truck -finish hot-dip galvanized Dimensions (lxwxh): 1200 x 800 x 350 mm

The DAMBACH COMPACT SHUTTLE for high bay warehouses, makes pallet storage and retrieval even more efficient. Used in conjunction with rail-guided storage and retrieval machines, the COMPACT SHUTTLE enables warehouse operators to achieve really compact, multi-deep pallet storage. To do this, the storage lanes are fitted with rails on which the shuttles can run. Shuttle and storage and retrieval machine (SRM) therefore form one logistical unit: the shuttle runs on the rails to the allotted storage position where it sets down or picks up a pallet, and the SRM transports the shuttle to the correct storage or retrieval point in the warehouse. Communication between the parent vehicle and the COMPACT SHUTTLE is by way of a point-to-point radio link. This link monitors itself permanently to guarantee maximum communication reliability. Especially a combination of transfer cars and COMPACT SHUTTLE can reduce the energy usage, while maintaining a high throughput capacity.

Logistics management The useful addition to production We supplement our product range for our customers with our logistics services. After production, we take care of the palletizing, labeling and packaging of the goods produced. If necessary, we provide appropriate exchange containers such as collapsible and stackable full metal boxes. Stay flexible and reduce costs By storing finished products in our warehouses our clients gain flexibility, because we guarantee full availability. At the same time our logistically favourably-positioned logistics locations reduce distribution costs for our customers. As additional services we offer our customers a fully comprehensive shipment management, including complete export formalities. Areas of application Storage of Big Bags Storage of palletized bagged goods Storage of drum containers Storage of produced goods and dispatch management for export Sample shipping / sample pattern fillings Shipments of single bags of palletized goods P