Paint booth filters - Import export

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

Filters made at our factory in Nantes (France) Standard Filtr’Overspray is well adapted to filtration of paint overspray in spray booths. It is easy to manipulate and to stock. Its lifetime, 6 times longer than other filtering medias on the market, allows to make important costs reductions. This filter is perfectly adapted to filtration of any wet overspray particles (paints, varnishes, gel coat, glue, silicone, polyester etc…) Advantages of this filter : - Lifetime up to 6 times longer than other filtering medias on the market - Easy installation and manipulation - Environment friendly materials according to ISO 14000 - Adapted to filtration of solvent paints and water based paints This filter can be used in all spray booth with horizontal and vertical airflow.

Filters made at our factory in Nantes (France) This filter uses the same principle than Standard Pleated Cardboard Filter with a polyester media sticked at the back in order to increase filtration efficiency for dry dusts. Advantages of this filter : - Lifetime up to 3-4 times longer than other filtering medias on the market - Better filtration efficiency than Standard Pleated Cardboard Filter - Easy installation and manipulation This filter can be used in all spray booths with horizontal and vertical airflow. Construction : This filter is made of 2 layers of recycled kraft paper, perforated, pleated and glued with a polyester media at the back. The quality of kraft paper (250g/m²) guaranties rigidity of the filter in all positions. Standard widths : - 1m - 0,90m - 0,75m Other dimensions and cuts on demand.

It is a new environmental protection product that does not have pollution problem. Principle: It is base on the inertial separation principle, force the load flow change the direction many times, so that the particles which heavier than the air will be absorbed, and the air will keeping moving forward. Application: Filter the particulars of the solid and liquid in the air, and reach the uniform flow effect Feature: The design is good for the distribution of the speed Low resistance and high efficiency Long-span than other paper filter, up to six times Can be used for 500-600 hours continuously, conform to DIN53438 k1 It will be better if add fiberglass or sythetic cotton on inlet side Can make filter with frame upon request

ceiling filtration at spray booth, standard industrial spraying system, air clean system pre-filtration, flow decentralization at ventilation system. Filter material and features: Elevated density polyester fiber with combed mesh via hot wind, counter flow side reinfored by net or cloth, full glued. Certified EN779 Anti-humidity: 100% r.F. Temperature resistance: 80℃/176℉ Non-flammablility, self-extinguishing conform to DIN53438 F1 Filter particles: ≥1μm Served in roll or piece Options available: Filter Media F5/M5, 20m x 1.6m x 20mm Filter Media F5/M5, 14m x 1.6m x 20mm

The key role of an automotive spray booth is to control the environmental conditions while workers spray-paint a vehicle. GL-C series auto paint booths will be your good choice to meet the requirements. Main room & Basement Wall panel: color steel + polystyrene material. wall panel vertical type installation, rock wool is optional. Basement: steel structure, 3 tons rated load. Intake Fan: the total air flow volume is 24000m³/h. Spraying/baking transition damper: cylinder driving mechanism. Heating & filter system: Heat ex-changer: made of stainless steel, cycling heating. Burner: RIELLO /G20.New Design High Standard Spray Paint Booth GL-C1 Roof filter: hinged type network installation. Lighting & control system: Upper light: 8sets. Control box:made of domestic high-quality components. Spraying: with functions of constant temperature spraying. Environmental filter: activated carbon as option

Synthetic Fiber Roll Filters are formed as a result of thermal bonding of synthetic fibers without using any binders or adhesives. They provide low pressure reduction and high dust holding capacity, as well as obtaining an effective filtration thanks to the pore structure that tightens towards the air outlet direction. Although some types can be washed and reused, most of them are disposable, providing healthier filtration performance. It is available in different grades from G3 to F5. They are not affected by moisture and contact with chemicals; have high physical strength. They are used as prefilter and precision filter protective filter in Paint Booths, Central Ventilation systems.

Sandwich style EPS (Epispastic Polystyrene) 50 mm thickness. Door: 3 pieces of luxury front doors with 0.8mm thick colorful steel skin. Air Circulation System: 1X5.5kw intake fan. Belimo damper burner: Riello FS10 burner, 100000Kcal/h. Ceiling filters capture granules larger than 5 μm.

The open-front design saves valuable floor space and makes it easy to move products and parts in and out of the booth. Also we can custom design an open face paint booths to meet your requirements. Cabin specifications: Galvanized sheet wall panel External size: 2080*2040*3000mm Internal size: 2000*2000*2300mm With paint mist filter collector With exhaust fan with Explosion-proof Power: 2.2KW Wildly use in training center, metal sheet center, 4S repair shop, painting seller, furniture factory..

Bus paint booths are designed for cars and other heavy vehicles. The height, width & depth can be customized as per requirement. The spray booth is pre-centres for fast assembly. The modular booths are easy to assemble. Thickness=50mm, polystyrene, rock wool available as required. 2. Basement: Steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional. 3. Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. 4. Basement: Steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional. 5. Ramp: 2 pcs vein boarder & filters: 1. Heat ex-changer: Stainless steel. Riello/ G20S burner. 2. Roof filter: 5 pcs of filter, mounted above support frame, which is made of steel and powder coated. 3. 2 pcs of floor filter and 1 pcs of outlet filter. 4. Upper light: 12 sets, 4*18w per set. LED 5. Control box: Imported components, overload, overheat, phaselacking, phase-locking protection, engine Y/△ start.

GL1-N series automotive paint booth is a non-pitted paint booth offered in a standard configuration that includes exhaust fan and but excludes intake fan and heating system. It is typically used as sanding booth, primer booth and quick repair booth. Standard Configurations -Lighting system: upper lights are 8*4*18W LED light tubes, no lower lights; -A tool cabinet and an electric control panel are integrated in to the rear wall of this paint booth. The tool cabinet is designed to add extra storage capacity to keep supplies and tools which are commonly used for sanding and painting. And the electric control panel contains emergency stop button, single-phase & three-phase sockets, compressed air quick release couplings, etc. This greatly increases paintwork efficiency while avoiding unnecessary entering and exiting the paint booth; -Infrared paint curing lamp is optional;

Combined spraybooths are designed for manual painting application for automotive industry with downdraft ventilation and drying system. It is manufactured from insulated panel body. Installed to the factory ground or to an metal basement, extraction air ducts are placed at the ground, Fresh air plenum and filtering system is located at the ceiling that creates clean environment inside the spray booth during the painting and drying application. Painting or drying option are selected manually from the control panel, flash-off and cooling positions are automatically controlled. Includes standard type illumination system and optionally Ex-zone, electrical control panel and wiring to the control panel is done. The spray booth is fully controlled by PLC control system and a touch panel. Control system indicates when filters gets contamnated. Filters are easy replaceable. The spraybooth is CE certificated and conforms to the European Norms.

The spraybooth is designed for manual painting application, with sidedraft ventilation and dry cardboard filtration system. The benefit of the retractable liquid spray booth is that it is an extendeable and saves space in the workshop at folded position during it is not used. The spray booth is environmentally friendly.

Features 1.All steel construction raised basement; 2.Full downdraft airflow style, ensuring turbulence-free airflow path; 3.Illumination brightness reaches 1200 lux; 4.Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); 5.Sheet metal is processed to European standards; Standard Configurations -Basement: all steel construction raised basement, 5-row grating; -Fan unit: one 7.5kw intake fan, one 7.5kw exhaust fan; -Heating: Riello RG5D burner, with heat exchanger; -Lighting system: upper lights are 14*4*13W LED light tubes, lower lights are 10*4*13W LED light tubes; -Wall panel: sheet metal is molded by one-step process, four-side edge banded rockwool insulated wall panel, thickness 50mm -Ceiling structure: 14 pieces of precision punched steel panels -Roof panel: double-skin insulated roof panel -Electric control: imported electrical components, phase loss protection, overheat protection and overload protection

Features -All steel construction raised basement; -Full downdraft airflow style, ensuring turbulence-free airflow path; -Illumination brightness reaches 1000 lux; -Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); Standard Configurations -Basement: all steel construction raised basement, 2-row grating+3-row checkered plate; -Fan unit: one 5.5kw intake fan, one 5.5kw exhaust fan; -Heating: Riello G20 burner, with heat exchanger; -Lighting system: upper lights are 8*4*18W LED light tubes, lower lights are 8*2*18W LED light tubes for option -Wall panel: EPS insulated wall panel, thickness 50mm; -Ceiling structure: welded ceiling frame; -Roof panel: single-skin galvanized steel roof panel; -Electric control: phase loss protection, overheat protection and overload protection, direct starting of motor;

Pump out of water: allow machine to last a lot longer. Maintenance is much easier. Pump could last more than 20 year (making periodic and correct maintenance). Openable veil allow to clean the machine better and faster. Increasing machine life and safety at work. Hight quality material give an important reliability (MADE IN ITALY).

All standard tecno azzurra machines are ce marked and ready for use. Standard configuration: extractor with anti-sparking safety system atex lighting main structure formed by self-supporting galvanized panels with non-cutting edges filter clogging detection system lv control panel wired with flame-retardant cable type of filter installed according to machine model all our machines can be manufactured, either fully or partly, from aisi 304/316 stainless steel

Features -All steel construction raised basement; -Full downdraft airflow style, ensuring turbulence-free airflow path; -Illumination brightness reaches 1000 lux; -Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); Standard Configurations -Basement: all steel construction raised basement, 2-row grating+3-row checkered plate; -Fan unit: one 7.5kw intake fan, one 5.5kw exhaust fan; -Heating: Riello G20 burner, with heat exchanger; -Lighting system: upper lights are 10*4*18W LED light tubes, lower lights are 8*2*18W LED light tubes; -Wall panel: Rock wool insulated wall panel, thickness 50mm; -Ceiling structure: punching ceiling frame; -Roof panel: single-skin galvanized steel roof panel; -Electric control: phase loss protection, overheat protection and overload protection, direct starting of motor;

Details Double filtration: first filtering barrier made of cellular type cardboard filter second filtering barrier made of paint-stop glass fiber filter Installed vertically to maximize filtering surface