Outdoor electrical enclosures - Import export

The NSBon-47 is a compact and cost effective Active PoE (48VDC) to Passive PoE (24VDC) converter. The input can accept any PoE that meets IEEE802.3af/at/bt standards from regular switches or injectors. The output is 24VDC Passive PoE up to 24W. Incorporating a compact, in-line design, they are perfect for outdoor use inside a weatherproof electrical enclosure. NSBon-47 can be connected to any PoE port of Industrial switch located inside outdoor access Node NSBox by RJ45 male connector. It is compatible with auto-sensing and is recognized by PoE switch as a 802.3at/af PD device. On the other side of the converter there is an RJ45 Female connector for connecting various devices powered 24VDC Passive PoE ranging from video camera, access point, and router (Ubiquiti UniFi, airMAX etc.). Pins 4,5 and 7,8 of the RJ45 Female connector are used for powering in PoE mode B. Maximum output power is 24W. NSBon-47 compatible with all 24VDC Passive PoE devices.

Novelis has created the first flat-rolled, aluminium-intensive electric vehicle battery enclosure designed for mass production vehicles. Learn more by downloading the product fact sheet. By utilizing Novelis’ highly-formable alloys, the battery enclosure provides automakers the ability to achieve deep drawn, complex shapes tailored to specific vehicle design requirements. The lightweight, high-strength material can help extend range, allowing vehicles to go 6-10 percent further on a single charge. With safety as a top priority, Novelis conducted extensive testing simulations to ensure its innovative, high-strength materials will protect batteries from road debris and vehicle crashes.

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Moulded from a black, glass reinforced polyester. Smooth finish. • Includes Gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North American Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Enclosures have an impact rating of IK09 in conforming with IEC 62208 and IEC 62262. • Lid contains self captivated stainless steel screws. • Gasket is silicone. Heat resistance 100°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Product Features: • Moulded from a grey, glass reinforced polyester. Smooth finish. • Includes gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North America Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Impact rating of IK08 per IEC62262. • Lid contains self captivated stainless steel screws. • Gasket material is Mohogumi rubber (EDPM). Heat resistance 100-120°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Product Features: • Ideally suited for mounting printed circuit boards. • Can be used in a tabletop configuration or two different wall-mount configurations. • Rounded corners and face provide a more modern look while still offering superior water-tight ratings. • Available in black or grey ABS plastic or UL listed polycarbonate. • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use and carry a UL94-5VA flammability rating. For indoor or outdoor use. • Polycarbonate versions are cUL and UL 508A listed (File #E65324), NEMA 4, 4X, 6, 6P. ABS plastic versions are not UL listed. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Gasket is one piece made from high temperature, U.L. listed silicone. • ABS versions are designed to meet IP66.

Product Features: • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc, etc). • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components. • Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws). • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label. • Standoffs moulded in the interior of the lid and enclosure - designed for #4 x 1/4" self tapping screws (Part number 1555TS100). • Choice of two materials: • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) - Recommended for outdoor use • Colour is a light grey (RAL 7035) to help keep heat absorption down.

Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • "Styled" lid version has three main advantages over the flat lid (1555 Series) features below: • Smooth recessed surface on lid for a membrane keypad or label • Standoffs moulded in the interior of the lid (except for size "B"). Designed for #6 self tapping screws • More modern "styled" look V's the traditional flat lid (1555 Series). • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating. • Polycarbonate versions are UL 508A listed (File #E65324). • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water.

Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.

Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating. • Polycarbonate versions are cUL and UL 5008A listed (File #E65324). ABS plastic versions are not UL listed. • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed). • Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only).

Product Features: • Versions without mounting flanges are available in unfinished aluminium or smooth ASA 61 grey powder coat (Hammond colour GY2). • Versions with wall-mounting flanges are available in unfinished aluminium or smooth black powder coat (Hammond colour BK2). • Unpainted aluminium version is protected through manufacturing and shipping with a plastic film cover to ensure a high quality finish. Also doubles as a removable drilling template. • Steel finished in ASA 61 grey baked powder paint (inside and out to prevent rust).

Product Features: • Sizes A to E are 20 gauge 0.036" thick steel. • Sizes F to J are 18 gauge 0.048" thick steel. • Self-tapping screws included. • ASA 61 grey baked powder paint.

Product Features: • Designed to house P.C. boards or equipment. • Easy wall mounting or shelf mounting with two removable flanges. • Sized for standard Eurocard P.C. boards. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Two piece body - with easily removable belly plate for easy access to top interior of enclosure. • Extruded body and aluminium endplates with a choice of either clear or black anodised finish. • Includes eight (8) assembly screws - either clear or black assembly screws to match enclosure panels and body. Note: Recommended screw torque i 5 lbf.in (56.5 cN.m).

Product Features: • Heavy duty construction walnut chassis. • Top panel available in a choice of natural aluminium or satin black powder paint finish. • Walnut chassis is 0.778 inches thick (19.8mm) - corners are produced with wood bracing and dovetail construction methods. Designed to handle heavy components. • Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2mm) thick. Fully "framed" support from walnut chassis. • Includes four large ground rubber feet (0.75" dia. x 0.56" high) with mounting hardware into inserts to avoid wood damage. Hardware is of proper length to allow use of optional bottom plate.

Product Features: • Aluminium cases 0.081" (2mm) thick aluminium. • Aluminium top panel sizes to 14" wide are 0.064" thick aluminium. Larger sizes are 0.081" thick. • Sold pre-assembled with a textured blue case and a choice of a contemporary grey (beige) or a black top panel. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Solid oiled walnut sides on a black, ventilated steel base. • Solid wood sides are real walnut - each piece has a unique colour and grain. • Aluminium top panel is powder painted in a satin contemporary grey (beige). • Aluminium top panel sizes are 0.064" thick aluminium. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Convection ventilation is provided by slots in the bottom and removable rear panels. • Aluminium case is finished in satin blue with a contemporary grey panel. • Vented back panel, bottom, and sides are made from 0.081" thick aluminium • Sloped front panel is made from 0.064" aluminium • Supplied with hardware and rubber feet.

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Heavy duty, 18 gauge steel - top and bottom case in satin black or gulf blue powder coat. • Available with either sold or vented tops and bottoms. • Easy to machine 0.064" thick aluminium front and rear panels (one satin black and one contemporary grey for each enclosure). • Symmetrical design so either end panel can be used as a front or rear panel. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include one horizontal row of louvers for ventilation. • Choice of sloping or vertical sides by reversing case. • Includes an handle (Part number 1427C1) and holes in the top for mounting. Also includes plastic plugs if handle is not desired. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware. • Assembled with 8 machine screws into weld-nuts for repetitive assembly and disassembly.

Product Features: • Heavy duty (0.1" thick) aluminium base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include four horizontal rows of louvers for ventilation. • Includes heavy duty (0.1" thick) aluminium raised mounting panel. Mounting surface includes 8 press nuts for mounting and a 5" (127mm) x 8.63" (219mm) area. • Front and back is recessed near the top with flange - to act as built in lifting handles. • Sold pre-assembled in a light textured - dark grey powder coat finish. • Comes with three cord grommets for front and rear holes and required assembly hardware. • Assembled with 8 self-tapping Philips head screws.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include two horizontal rows of ventilation. • Choice of sloping or vertical sides by reversing case. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware.

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded body includes a slide removable "belly" plate - except in smaller sizes "A" through "D".

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.