Optical fibre supports - Import export

Underground detectable marking tapes with logo. The marking tapes with logo indicate underground network installations, fiber optics, cables, natural gas, sewerage, etc. There are two different types of marking tapes with logo plein or perforated. There is possibility to print a suitable warning message on all marking tapes.

Tapes for detection and marking of underground installations. The tapes indicate underground network installations fiber optics, cables, natural gas, sewerage, etc. They have built-in stainless steel wire which can be detected from proper equipment and can indicate underground installations. A suitable warning message can be printed on every tape.

# Description Taihan Fiberoptics offers an extensive selection of self-supporting fiber optic cables used in pole-to-pole networks, overhead transmission lines and distribution lines as an excellent solution for aerial networks with outstanding optical performance,durability and reliability. All our prototypes are designed and manufactured to operate under the required environmental conditions and to endure the external forces, such as wind, ice and extreme temperatures to which they might be exposed to during their lifetime. ADSS cables have become the No.1 choice for ISPs and Power Utilities for network expansion due to its faster deployment and reduced installation cost. # Applications - Pole to Pole aerial installations - FTTx networks - Enterprise OSP Networks - Electric Utility Distribution Power Lines - Duct installations # Products - Rock ADSS™ Short span - Rock ADSS™ Long span

ALL-DIELECTRIC-SELF-SUPPORTING CABLES Fiber optic cables with this design consist of a central support element and several loose tubes with a maximum of 24 fibers which are stranded around the central support element. For use on overhead lines, these are equipped with extra aramid yarns for strain relief. This enables tensile strengths of up to 50 kN to be achieved.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

Spiral clamp is designed for mounting a self supporting fiber optic cable to the light poles, towers of high voltage lines, the contact networks of railways, buildings and structures. The clamp consists of a power section, which is a U shaped strand of several spiral wires, fastened together with a special solution, on the inside of which an abrasive is applied. The protector for additional protection of the cable is a set of individual spirals or glued strands.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses, as well as winding, connecting and attaching to external load bearing power elements (ropes, wires, etc.) at points with a maximum electric field potential up to 12 kV.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses, as well as winding, connecting and attaching to external load bearing power elements (ropes, wires, etc.) at points with a maximum electric field potential up to 12 kV.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses.

Spiral clamp is designed for mounting a self supporting fiber optic cable to the light poles, towers of high voltage lines, the contact networks of railways, buildings and structures. The clamp consists of a power section, which is a U shaped strand of several spiral wires, fastened together with a special solution, on the inside of which an abrasive is applied. The protector for additional protection of the cable is a set of individual spirals or glued strands.

# Description Taihan Fiberoptics' multi-purpose loose tube cables are designed for outdoor applications to be used in Duct, Lashed or Direct Buried(Armoured) installation. Out Loose Tube designs are composed by flexible gel free fully water-blocked buffer tubes in a SZ stranded cable core facilitating handling, preparation and cable mid-span entry. Optional armoured type with corrugated steel tape provides mechanical protection and rodent resistance. # Features - Water Proof (Long product life) - Quick Identification (Color coded Fiber) - Durable Design (UV resistance) - All Dielectric (No effect to electric lines) - Easy to handle (Flexible & Light weight) - Excellent Flexibility (Easy to install) - Cost Saving (Fast Splicing) - Eco Friendly (Gel free material) - Easy Preparation ( All dry block) # Products - MT Single Jacket Non Armoured - MT Single Jacket Single Armoured - MT Double Jacket Non Armoured - MT Double Jacket Single Armoured

We produce in Austria. A single-mode optical fiber with a low water peak (G657A1/G652D) hybrid with advanced characteristics is a fiber with a reduced sensitivity to bends. The fiber is produced by vapor axial deposition method (VAD) with a quartz core alloyed with Germanium. It completely complies with the requirements of ITU­-T G.652d and exceeds ITU­-T G.657A1 parameters of macrobend loss and attenuation. Double acrylic coating provides it´s high strength and long service life. The fiber works in a full spectral range of different access networks, including FTTH, and can be applied in long-distance communications. Fiber-bending resistance and improved attenuation parameters give an advantage in the application for residential networks. The quality control system of the factory confirms plug compatibility with fiber (G652d) as well as with all on the market available SMF fibers.

Using some of the best light sources from suppliers including Universal Fibre Optics in the UK, NGA can supply and install a huge range of Fibre Optic solutions. These include installation within swimming pools, chandeliers, bespoke light fittings, standard ceiling systems and of course stretch fabric ceilings. With the ability to make up Fibre Optic looms in house we fuse versatile DMX, 0-10 or switching LED light sources with our high-quality looms to create affordable solutions. Fiber optic lighting uses optical fiber optics lighting as a sort of pipe which transmits light from the main source through the fiber to the spot where the illumination is needed. transmitting light from a source through the fiber to a remote location. It can be used to make a starfield ceiling within a stretch ceiling, to display features in a furniture, for example in a museum or in a residential project.

Fiberoptic Patch Panels, which are used to terminate the fiber optic cable and to provide access to the individual fibers of the cable for cross connection, are manufactured as 19 ”and they are mounted on device rails. Patch cable manages small and large quantities of fibers with high capacity. The fiber comes securely with cable glands; Allows very little movement. 1U version from 12 ports to 36 ports 2U version from 48 ports up to 72 ports Standard color is 9005 black. In addition, RAL 7035 can be produced in light gray.