Results for
ATELIERS JEAN PERZEL
France
French lamp This lamp is composed of sliding beveled glass with opening sections, very representative of the high precision craftsmanship achieved in our workshops. This superb creation from 1926 is still a collectors’ dream. Different finishes available Works with any type of bulb
Request for a quotePOR METAL URUNLERI INSAAT TURIZM VE SANAYI TICARET LIMITED SIRKETI
Turkey
It is a type of door that can be preferred for wider openings, with larger wing material sections. In this product, there is a rail on the floor only in the passive area and there is no problem that will prevent the passage of vehicles in the active area. It has the appropriate infrastructure for the installation of electronic lock systems.
Request for a quoteCAIXILHARIAS MANUEL COSTA UNIP LDA
Portugal
» Wide variety of mullions (from 16 to 230 mm) and transoms (from 22.5 to 205.5 mm) that solve the different aesthetic and constructive needs of the architectonic sector » Internal seen section: 52 mm » Extensive profile range, their mechanical unions allows for all types of façades to be built (vertically, inclined, 90° corners, corners, polygonal) as well as solving large and heavy glazing modulations » Water tightness elements: drainage pipettes, tear strip gaskets and vulcanized angles » The fixing of the glazing to the supporting profiles is carried out by using clips. This system requires an additional profile that is fitted into the glazing chamber (U profile) » It has a “glass only” style on the exterior » Glazing Maximum glazing 64 mm* Mínimum glazing 6 mm *Consult us for greater thicknesses » Opening possibilities Hidden Top Hung » Sections Mullion 52 mm Transom 52 mm » Profile thickness Mullion 2.1 and 3 mm Transom 2.1 mm
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
Production standards are summarized as below for Cold Formed Sections; Water and gas pipes: EN 10217-1 TR1, EN 10255, DIN 2440, BS 1187, ISO 65, N FA49-145, ASTM A53, ASTM A500, DIN 2999-2986, BS 1387, ASTM A53 Industrial Pipes: DIN 2458-1615 & 1626, BS 6363, BS 6323, BS 1139, EN 39, EN 10219-2 Open Sections: EN 10162 Square and Rectangular HS: EN 10219-2, DIN 2395, DIN 59411, BS 6363, N FA49-541, ASTM A500, UNE 36-537, SI 1458 For Hot Formed Sections as per EN 10210/ASTM A501.
Request for a quoteSALT CAM
Turkey
When the photocell detects a signal, this mechanism detects a person or an object at the middle of the door and provides a complete security by keeping the door open. In case when anything is stuck in, it opens the door immediately. If a person or an object stucks in during the process of closing or opening the door, the security section provides security by reversing the process. Protection System The electronic system device provides an automatic protection against high voltages (except from the ones higher than 280 volt and sudden rises). The door is opened or closed automatically according to the signals from inside or outside of the sensor.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KMC GROUP - MEKO METAL
Turkey
Maximum sheet thickness that can be formed: 8mm Maximum bandwidth 1000 mm Open profiles made of galvanized, hot, cold, painted,magnelis sheet Production in desired lengthDrilling, shaping and bending processes before or afterprofile Special profile production in every desired crosssection and construction of all mechanical processesdepending on the profiles.
Request for a quoteOSCAR BOSCAROL SRL
Italy
Set of 6 two-pieces cervical collars, made with injection mould system Perfect immobilization of cervical section Frontal opening for trachea check Made in polypropylene X-ray transparent with non absorbent padding Different colours for an easy identification of sizes Complete with bag
Request for a quoteOSCAR BOSCAROL SRL
Italy
Set of 6 First Response one-piece cervical collars, made with injection mould system Perfect immobilization of cervical section Frontal opening for trachea check Made in polypropylene X-ray transparent with non absorbent padding Differently coloured for an easy identification of size Complete with bag
Request for a quoteFUSED MACHINERY
Belgium
The LT COMBO is a combination machine for laser cutting sheet, round, square and rectangular tubes with different open/closed section, made of iron or steel (soft and alloy). Thanks to the special machine structure, there is an automatic transition from sheet metal processing to pipe processing and vice versa in just a limited time. This particular machine is in good condition and can be viewed in operation. Availability: 09/2023 More info on request.
Request for a quoteCOLORICIO.SRL
Romania
Coloricio can sell steel sections (hollow and open) seam and seamless. The products are made on the basis of good quality steel and meet applicable standards. We use constructional alloy steel and fine grain steel for their production. They are willingly chosen by companies specialising in the building and machine-building industries.
Request for a quoteEM-TECHNIK GMBH
Germany
This ball valve is the ideal partner wherever aggressive gases and liquids have to be safely and reliably shut-off, isolated, mixed or distributed. It is light and compact and also has a good flow rate, even with soiled media. The shut-off body consists of a ball with a hole drilled through it. When the valve is open the entire cross-section is clear. A special mounting system makes it easy to assemble the ball valve in the desired location. Our ball valve is also available on request in the bulkhead version.
Request for a quoteTERMOEXPRESS TRADING SRL
Romania
A TERMOEXPRESS sectional door saves space and energy. The sectional door consists of panels hinged together; when the sectional door opens, the panels slide vertically under the garage ceiling. It is therefore less bulky than an overhead door. For the material of your garage door you can choose between PVC, aluminium or wood. A sectional door is also easy to insulate and therefore reduces energy losses
Request for a quoteGLÄSNER SANDSTRAHL MASCHINENBAU GMBH
Germany
DSK-Eco series in stable steel plate design with attached dust filter system and automatic blasting agent circulation. Our model DSK-Eco is characterized by its elegant design, simple operation, low material consumption, highly effective dedusting, rational operation. The models of the DSK-Eco range have a large, top-opening sectional door. A blasting medium circuit without any additional device is made possible by the built-in blasting device. A nozzle holder with a continuous jet nozzle, as well as a working grate in the system guarantee an extremely uncomplicated operation. A glare-proof Goliat lamp, exposed to the outside, illuminates the entire work area glare-free. A blasting cyclone recovery unit is used to classify the blasting agent. Efficient pressure-beam cabin of the DSK-Eco series. Direct from manufacturer, MADE IN GERMANY. We adapt the cabin to your needs.
Request for a quoteGLÄSNER SANDSTRAHL MASCHINENBAU GMBH
Germany
The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.
Request for a quoteDHJ WEISTERS LIMITED
United Kingdom
DHJ Weisters Ltd diversified into the weaving of Contract Furnishing Fabrics in 2003 and now manufactures up to 5000 metres (140cms/55" wide) per week. We work closely with customers either to develop patterns that are used as part of stock collections or bespoke designs for one off projects.We also design patterns in house using our own inspiration and designs, these are available and can be viewed in our “Open Designs” section. These are available for confinement by negotiation. We have an extensive colour and count range in warps and wefts and a flexible range of jacquard sizes, including a 70cms repeat. Each design is individually tailored to the customer’s specification. Our in house design team are able to quickly translate paper concepts to fabric samples ... ** Click for more **
Request for a quoteResults for
Open sections - Import exportNumber of results
16 ProductsCountries
Company type
Category