Open air - Import export

Fans suitable for all sizes of robots Simple ventilation or optional air conditioner, heater, air dehumidifier as needed Continuous air circulation under the cover up to the robot wrist joint Customized definition of the air handling system to match the on-site configuration Open or closed air circuit depending on the environment and fan storage area

In open air, resistant to fresh and salty water, sulphuric, sulfurous, phosphoric and chromic acids. Affected by acetic formic and nitric acids.

It treats underpasses, tunnels, bridges, tube crossings as an open-air museum; we make relief applications for touristic places, squares and cinema sector, especially the military and museums. We produce in low and high relief according to customer demands, and we assemble them in accordance with the texture of the region.

It treats underpasses, tunnels, bridges, tube passages like an open-air museum; We make relief applications for the military and museums, especially for touristic places, squares and the cinema sector. We produce in low and high relief according to customer demands, and we assemble them in harmony with the texture of the region. We immortalize the values ​​of our country with high standards of production materials and flawless workmanship... Sculpture production at Erlas always means quality...

Cabinet for bedding and preschool cots is a functional solution that fits perfectly in preschools and daycares. The cabinet can hold up to 20 complete bedding sets and 20 preschool cots. This ensures that all the necessary elements for sleeping and resting for the little ones will have their dedicated space. The cabinet doors are divided into two sections, allowing separate access to the lower section with the cots and the upper section with the bedding. Additionally, the doors feature openings that provide natural air circulation, which is important for maintaining the freshness of the bedding. The cabinet is made of high-quality furniture board in a maple color, giving it a modern and pleasant appearance. The doors, on the other hand, are made of painted MDF board, which is not only durable but also easy to keep clean. Dimensions: Width 150 cm x Depth 65 cm x Height 226 cm

BAG OPENER - BAGS OPENING DEVICE The Bag Opener is an opening device characterized by a regular and silent motorized fan and is designed to quickly pack and fill the bags. It consists of a stainless steel body suitable for contact with food and easy to clean. The bags with a hole for hooking are very easy to change and the constant air flow opens them easily one after the other. Fan with two-speed motor and on/off switch. Adjustable guides to facilitate filling. Attention: the collection of the bags takes place by tearing (naturally a small piece of bag will remain torn off).

Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire or coil heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. Our extended range of air heater variants comprises: -> Heaters for Laundry Dryers (series & spare parts types) -> Heaters for Cross Flow Fan -> Heaters for Powerful Radial Blowers -> Heating Crosses & Special Designs Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.

Filling: The pre-opened bags-on-a-roll are opened manually or automatically by air blast and they are filled while still hanging on the roll. After filling, the bag is teared off and sealed. Lateral cardboard disks ensure the steady and exact unwinding of the roll. Holes can be punched in the bags, allowing air to escape during the packing process. The back of the bag can be coloured for better visibility of the bag’s content. A vertical tear-off perforation helps to re-open the filled bags. Applications: pre-opened bags on a roll are used wherever many small pieces have to be packed within a short time, e.g. in industries such as automotive, toys, plumbing parts, electronics, metal hardware, household products, medical and health care Order Quantity & Printing: Like all our packaging solutions, we offer our bags-on-a-roll in nearly every quantity, from small series to large production, printed with up to 10 colours or unprinted – directly from the manufacturer!

LIPP drinking water tanks for water supply companies are offered together with our project partner Kurz Leitungsbau GmbH. In doing so, we meet the highest standards applicable to the supply of drinking water, from planning and conception up to construction. Our automated welding process for high alloy stainless steels based on the LIPP System enables us to offer tanks with a maximum volume of 10,000 m3. In addition, on site production “off the production line” enables construction to be completed within the shortest possible time. Optimum quality thanks to automated welding process Material savings and additional stability thanks to circumferential profile Short construction times thanks to mechanised production Easy to maintain and clean Low investment and maintenance costs Can be set up indoors or in the open air Turnkey complete solution or components

IN STEEL AND STAINLESS STEEL FROM 50 – 10,000 M3 LIPP welded storage tanks offer the ideal storage solution for a wide variety of media. Tanks are produced by means of an automated welding process specially developed by LIPP and can be constructed with steplessly adjustable volumes of 50 to 10,000 m³ according to the application. LIPP offers a corresponding selection of metallic materials suitable for use with storage media ranging from drinking water and foodstuffs to ethanol or oil. These materials range from a variety of different steel grades to high alloy stainless steels. The automated process meets the highest quality standards. LIPP storage tanks can be produced within a very short time, either on site in the open air or inside a building. The special circumferential profile ensures additional stability compared to conventional processes. KEY BENEFITS Three different welding processes based on the LIPP system and adjusted to the application

LIPP® Welded Tanks offer the ideal storage solution for a wide variety of media. Tanks are produced by means of an automated welding process specially developed by LIPP® and can be constructed individually in diameter in volumes of 50 to 10,000 m³ according to the application. LIPP® offers a corresponding selection of metallic materials suitable for use with storage media ranging from drinking water and foodstuffs to ethanol or oil. These materials range from a variety of different steel grades to highalloy stainless steels. The automated process meets the highest quality standards. LIPP® Welded Storage Tanks can be produced within a short time, either on site in the open air or inside a building.

Our production is done in specifically equipped rooms, to rule out the possibility of product contamination from the outside. This includes, for example: special access authorisation, airtight walls and ceilings, windows that cannot be opened, air supply to the rooms being filtered, higher inside air pressure in relation to the outside air, insect lamps to prevent contamination with insects, mandatory protective clothing, shoe covers, gloves and hair covers, written authorisation with documentation for all work or events taking place in the rooms, such as cleaning, conversions, malfunctions. We have specialised in the particular needs of the pharmaceutical, food and health industries. All production takes place under clean room conditions and in compliance with the highest hygiene standards. Some sections are FDA-approved. Food additives are processed in accordance with the HACCP principles and in compliance with the European food hygiene directives and are prepared for dispatch.

COMFORT DEHUMIDIFIER TTK 68 ETrendy technology with a smart look The TTK 68 E with its elegant green metallic look evidently focuses not only on design, upon first switch-on this comfort device also demonstrates that a full range of de luxe features can be affordable for everyone. One of many sophisticated extras: The air flap opens automatically when pressing the start button and closes upon switch-off in order to protect the air outlet from dirt. The device can be used in continuous operation, employing a hygrostat automatism or else whilst controlled by a timer switch. It comes with an extra mode for drying laundry and automatically indicates the necessity of filter cleaning or of emptying the condensation tank. The target humidity value is entered conveniently via real-value selection and shown directly on the innovative integral display, which is not only a true eyecatcher, but owing to this construction also particularly easy to clean.

Side flexing and spiral belts Pitch 25 mm (0.98 in) Design characteristics Suitable for both straight and radius conveying up to 45 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, fewer belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pins Components: Sprockets In different sizes with round or square sprocket bore Profiles In different heights and designs for inclines Side guards In different heights for retention of bulk products

Side flexing and spiral belts, Pitch 50 mm (1.97 in) Belts for medium to heavy-duty food and non-food applications Design characteristics Suitable for both straight and radius conveying 57 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, less belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pin Components: Sprockets In different sizes with round or square sprocket bore Profiles In different heights and designs for inclines Side guards In different heights for retention of bulk products

The collet is opened by applying compressed air to the "open" port. The collet is closed (for clamping) by applying compressed air to the "close" port. The pneumatic connections can be screwed on either from below or from the side. If the air is connected from below, the side ports must be closed. Machining the collet for external clamping: The negative form of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours are possible. Different workpieces can be clamped quickly and securely by simply exchanging the collet. The collet can be milled down to height H2. This enables multiple workpiece contours to be machined into one collet. Repeat accuracy for workpiece: +/-0.03 Repeat accuracy after replacing the collet +/- 0.02 The collet radial clamping travel is 0.15 mm per clamping segment. To prevent damage the collet should not be tightened without a workpiece or clamping ring in place. The operating air pressure should lay between 0.45 - 0.55 MPa.

This retractable roof system is designed specifically for outdoor dining areas in restaurants, cafés, and public spaces. It offers flexible coverage that can be adjusted to protect guests from sun and rain, enhancing the usability of outdoor seating throughout the year. The durable aluminum slats can be easily retracted to create an open-air environment when desired. This modern and functional solution ensures comfort for customers while maintaining a sleek, aesthetic appeal for commercial outdoor areas.

With its narrow module, the HB 11 is used for particularly fast cycle times. The HB 11 is compatible with Nordson and Robatech. The application head is delivered without a nozzle. Incl. 24 V solenoid valve Incl. Module HB 1 with UNF 3/8'' thread for use with standard nozzles Compact structural width for tight places: only 18 mm PT100 or Ni120 Air-opening / air-closing Head holder for 11 - 15 mm round bars With integrated filter (100 mesh) Hose connection SA 8 Optional: Inline filter, M8 plug for solenoid valve, insulation

The HB 20 BS surface application head is equipped with a wide-slot module, which enables a maximum application width of 20 mm. Alternatively, a module with an application width of maximum 30 mm can be selected. The surface application head is supplied without a spacer plate. Incl. solenoid valve connector for HB 6000 and HB 5010 Incl. 1 wide-slot module PT100 or Ni120 Air opening / Spring closing Head holder for 7 - 12 mm round bar Hose connection SA 8 Optional: Inline filter

Cortec VpCI® 170 Adhesive Foam Tape excels at corrosion protection and sealing. Unlike standard adhesive foam tapes, it incorporates Cortec's VpCI® technology, actively shielding metal surfaces from corrosion.VpCI® molecules vaporise, forming a protective layer on all metal, preventing corrosion without messy oils.This contrasts with basic foam tapes offering only passive protection through a physical barrier. Additionally, the tape boasts a high-performance adhesive for strong, long-lasting bonds to various surfaces, outperforming lower-quality alternatives prone to drying out.The closed-cell polyethylene foam is soft, conformable, and highly resistant to water, moisture, and air, surpassing open-cell foam options. Available in 1/8-inch and 1/4-inch thicknesses, it adapts to diverse needs.

Pizza ready in 2 minutes With PIÙTRECENTO the goodness at the table becomes greater. Its 80×90 centimeter cooking chamber has more space to cook a greater number of dishes at the same time; This makes cooking in the open air even faster, happier and more carefree. Switching on and heating in 10 minutes and then another 2 are enough to produce exceptional pizzas and more. Front parts in stainless steel, cover painted red, black and brown, independent trolley painted black. Pizza bread shovel, tray holder accessory, trays. Door with glass Also available on GAS

TAWI floor mounted cranes is the preferred solution when the ceiling structure is not strong enough to hold the girders. Also fitting when the ceiling is uneven or cluttered. For tall ceiling facilities For when flexibility is needed For open air applications

The IPR access door features a CR EPDM gasket and it is designed for installation on round duct walls. The design of the IPR access door and its gasket profile provide a perfect seal around the duct opening. This ensures a high air tightness class. The product provides a very simple, lowcost and extremely effective solution for closing and sealing access openings in the ductwork. The openings made in the ductwork for access doors must be sized to meet the requirements of EN 12097. Another determinant of the access opening size is how the interior is cleaned. Some cleaning processes and tools require access doors as large as 800x400 mm. The access door is installed in the opening made using the cutting template supplied with the product.

I Calvi Dried Tomatoes in Extra Virgin Olive Oil 180 g – delicious Italian tomatoes, dried in the open air, in extra virgin olive oil. Red, fleshy and tasty: a touch of warm Mediterranean sun. Product label In the 'Attachments' you will find the label with the nutritional data and other information about the product. Pairings Ready to use and eat. Calvi dried tomatoes in oil are an excellent appetizer served for example with slices of home-made bread or on bruschetta, but they can also be used to flavor a first course, for example, a nice risotto. They are delicious in vegetable, rice or pasta salads. For example, to give a special touch to a Caprese salad, adding dried tomatoes and capers. Storage method Store in a dry and cool place, away from heat sources. Once opened, store in the refrigerator (+4°C), keeping the product covered in oil and consume within 5 days.

Minimum number of participants: 15 Maximum number of participants: Unlimited Duration: 3 hours ENQUIRE TODAY Example of menu Menu Example: Fish soup Zeebruges style **** Lemon sole with leek, white wine sauce and tomatoes **** Ice dessert A few highlights of the A medieval open air museum Request more information about our trips Whether you are looking for an extensive programme or some specific services, we make your escape perfect. CONTACT

With its almost intact medieval street plan Bruges is certainly an evocative open air museum. Having survived the two World Wars, Bruges luckily preserved all its art treasures and museums. The Groeninge Museum for example ranks among Belgium’s top three. We need about eight hours to show you all the highlights of Bruges. Morning: We start our day with a cruise on the canals of Bruges. Being seen from a different angle Bruges’ loveliest places look even more charming. In the Groeninge Museum we find an excellent survey of works by Belgian painters from the 15th century till today. This museum boasts a complete collection of the Flemish Primitives like Van Eyck, Rogier van der Weyden, Hugo van der Goes, Hans Memling and Pieter Brueghel. In the modern art section we find Paul Delvaux, René Magritte, Constant Permeke and Gustave van de Woestyne . We continue over the Dijver. There we find the College of Europe that offers lectures and seminars on all aspects of the European Union...

This blocks features open slots to enable air flow through the block. It is available with or without a shutter.

It is possible to enjoy the sunshine or fresh air outdoors, or even to sit in the rain, thanks to the rolling roof, which has been increasingly used in different living spaces in recent years. Rolling roof systems provide an extra living space in the open air in the areas where they are used. They are waterproof with adequate slope, oval or flat projecting. In other words, rolling roof systems not only undertake the task of shading system, but also increase comfort in rainy or snowy weather. Rolling roof systems have a wide variety that allows you to choose sizes and aesthetic appearance based on needs and expectations.

The new version of the automatic Airmix® spray gun ensures high level performance with unsurpassed finish & excellent atomization quality. Description High transfer efficiency (up to 86%*) Excellent atomization quality Modular design & high reliability Performance Dual spring mounted outside fluid passage allows you to open air before atomizing fluid for better spray fan quality VX24 (adjustable spray) or VX124 (fix spray) and a large offering of fine finish and Xtra™ fine finish spray tips Extreme film buid accuracy and tolerance Productivity Easy assembly and disassembly - (4 bolts) for easy servicing Circulation in the base enables less pressure loss in circulation system Circulation in the gun offers a quicker and better flushing with limited volume of solvent sprayed into the machine or spray booth Sustainability Wetted parts are stainless steel, treated stainless steel & rulon for better durability Extented lifetime with most coatings An automatic spraygun compati