Results for
SIMCO-ION EUROPE
Netherlands
Each individual emitter pin of this anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. Another advantage is that the bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. Features - Medium working distance: 150 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling.
Request for a quoteSIMCO-ION EUROPE
Netherlands
The Performax Easy IQ is a high quality Industrial standard anti-static bar. The static eliminator has a glassfiber reinforced body that provides for easy and sturdy mounting. Due to the strength of the bar sizes up to more than 5 meter can be delivered. Mounting the anti-static bar could be realised with few mounting screws. The bar has an integrated 24v power supply with a rugged industrial M8 connection. The very effective bar makes discharging of high static charges possible, even in high-speed production applications up to 1000m/s. The bar is complete shockless so touching the Tungsten(Wolfram) pins is completely safe. The bar functions completely stand-alone and can for future demands be connected to external sensors and monitoring systems to create a full closes loop feedback system. Function control of the bar is done by means of high-power LED to make check-up of the functionality of the bar an easy job, even from further distances.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Simco-Ion's Top Gun III is developed for light industrial applications. A high ion production attend to an optimal neutralisation of static charges. High blow-off force and low air consumption provide high-efficiency cleaning. A filter at the exit of the gun ensures that the air is clean. The gun body is lightweight and durable. It features a light-touch trigger, making it comfortable even for extended use. All functionality is built into the gun, including a flowcontrol valve, and a two-level LED which indicates if the gun is in ''stand by'' mode and if high voltage is currently active. Both the gun and cable are static dissipative. A hanger is provided for easy mounting. One gun can be connected to one power unit. Top Gun Side Kick The Top Gun Sidekick offers handsfree operation. A foot pedal controls both ionization and airflow. The Top Gun Side kick includes a flexible mount feature with a bracket for flexible positioning.
Request for a quoteSIMCO-ION EUROPE
Netherlands
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air
Request for a quoteSIMCO-ION EUROPE
Netherlands
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airkife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Airpressure sensor Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned. Power unit A2A7M Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M.
Request for a quoteSIMCO-ION EUROPE
Netherlands
The ThunderION Control Module provides the power and the control for up to four ThunderION anti-static bars. With this Control Module, you can control all connected ThunderION anti-static bars and check they are working correctly from a central location. The Control Module operates on the mains voltage, which can be turned on and off with a switch. A cable with a pre-assembled connector at each end links the ThunderION anti-static bar with the Control Module. This offers quick and easy assembly. All cables carry just 24 V. The Control Module enables you to check the functioning of each connected anti static bar. A green LED indicates that the bar is switched on. A red LED indicates that a fault has been detected. Via the I/O port, you also have the option of switching each bar on/off remotely and separately, as well as checking its correct functioning. Features - Provides power for up to 4 ThunderION anti-static bars - Controls the operation for up to 4 ThunderION anti-static bars by
Request for a quoteSIMCO-ION EUROPE
Netherlands
Simco-Ion’s patented IML charging technique is even more versatile with the IML Easycore 2 component resin for construction of IML cores. Even very complex and small cores can be constructed with the 2 component resin. The resin is specially developed by Simco-Ion to have the perfect electrical and mechanical properties for use as an IML core. All mechanical operations s.a. drilling, grinding, milling etc are possible to make the core to the perfect shape and size. The IML Easycore comes in duo-packs consisting of the resin and the correct amount of hardener. Package sizes of 250 g are available. Features - 2 component resin for construction of IML cores - Even very complex and small cores can be constructed - Comes in duo-packs consisting of the resin and the correct amount of hardener - Available in 250 and 500 g
Request for a quoteSIMCO-ION EUROPE
Netherlands
The IML Spider is a versatile electrode for direct charging for IML applications. It consists of a IML Spiderblock with built-in resistors to prevent accidental sparking. The IML Spider Block has 8 output ports, withresistors per port, for connection of up to 8 flexible charging electrodes. An additional output port isprovided for daisy chaining complementary IML Spider Blocks. All connection ports are equipped with quick connect plugs. Electrodes are available in lengths of 300 and 500 mm and a special 500 mm long one that can be tailored during installation by use of a special tool. Interconnection cables are available in lengths of 0,5 , 1 , 2 and 3 metres. Connection cable for use with the CM type generator are standard 2 , 5 and 10 metres long. The IML Spider can be used for IML applications in conjunction with IML generators with a maximum output of 18 kV.
Request for a quoteSIMCO-ION EUROPE
Netherlands
The CMME is a small profile footprint charging generator specially designed for IML applications. The unit has fully integrated high voltage parts and only needs a 24V DC supply. The housing is compact, robust and only weighs 480 grams which makes it perfect for end of arm mounting in IML pick and placehandling systems. It can easily withstand the high G-forces occurring during the IML process. The CMME has a unique (patented) cyle OK feature. A signal will become active when the label(s) have accumulated enough electrostatic charge indicating that the charging is finished. This signal can be used by the machine interface to decide to stop charging. A second stage in the cycle OK signal will indicate that the charge on the mandrell has dropped below asafe level to start moving the mandrell out of the mould.This innovative feature completely eliminates the guess work and experimental setup for each individualIML application, and when changing product or label.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Extension IQ Easy: an extension to the IQ Easy Platform The IQ Easy platform with at least one Manager IQ Easy can be extended with the Extension IQ Easy to control an additional 6 devices. The Extension IQ Easy comprises of a Control unit without a display. Status LED's show the power on and overall warning or alarm status. Up to 6 IQ devices can be connected to the Extension IQ Easy. The 24V DC power distribution is routed via the Extension. So no extra cables!This makes the connection of a device even easier than connection to a single desktop power supply. The Extension IQ Easy is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 devices connected. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible by using multiple Extension IQ Easy's. Each Extension adds another 6 devices to the system with a maximum of 30 devices.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Manager IQ Easy: the heart of the IQ Easy Platform Manager IQ Easy Introducing a new level of static control; the heart of the new IQ Easy platform is the Manager IQ Easy. It comprises of a Control unit with a 7'' LCD touch screen, provides information from all the connected devices and makes it easy to change and monitor status and parameters. Up to 6 IQ devices can be directly connected to the Manager IQ Easy. The 24V DC power distribution is routed via the Manager, so no extra cables! This makes the connection of a device even easier than connection to a single desktop power supply. The Manager IQ is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 connected devices. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible using the Extension IQ Easy. This adds another 6 devices to the system with a maximum of 30.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Sensor IQ Easy: that measures the electrostatic charge A sensor that measures the electrostatic charge of a web can be added to the IQ Easy platform. The Sensor IQ Easy is a bar type device that can hold op to 16 sensor heads. Each sensor head can be placed on a strategical position across the web to monitor the electrostatic charge. All data of each sensor head is communicated to the Manager IQ Easy and stored for process monitoring. For dirty environments or for precautionary protection of the sensor heads, the Sensor IQ Easy bar is equipped with a compressed air connection. Using only a very low pressure and air volume dirt entering the orifice of the sensors is prevented. Anti static bars or charging generators in the system can act on data received from a sensor. This makes it possible to control the static charge level on the web in real time using a closed loop feed back and correction routine.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Features - Convenient high-voltage indicator in pen size - There is no need to make contact with the device being controlled - The tip of the TensION illuminates when a voltage is detected
Request for a quoteSIMCO-ION EUROPE
Netherlands
The FMX-004 is a convenient, compact and pocketsized electrostatic fieldmeter. With this fieldmeter you can measure and store the field strength and polarity. It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LEDs. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. The unique bicolour display shows the measured value both numerical and graphically. The status of the battery is shown on the display. features - Accurate measurements - Electricity conductive plastic housing with an earth connection - Possible to carry out measurements in awkward places - Indicator for battery status - Pocket-sized
Request for a quoteSIMCO-ION EUROPE
Netherlands
Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 6 - Dimensions: Length 166 x Ø 20 mm
Request for a quoteSIMCO-ION EUROPE
Netherlands
Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and thePinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 5 - Dimensions: Length 166 x Ø 20 mm
Request for a quoteSIMCO-ION EUROPE
Netherlands
Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 3 - Dimensions: Length 158 x Height 35 x Ø 20 mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIMCO-ION EUROPE
Netherlands
These rugged charging bars are used in a variety of industrial applications. The slot at the rear of the charging bar permits easy mounting. HDC charging bars are provided with a resistor to avoid failures in the machine control system in the event of accidental spark-over. The cable output may be straight or right-angled (90°). Features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suitable for a variety of industrial applications - At an unforeseen spark it doesn’t create an interruption in the machine control
Request for a quoteSIMCO-ION EUROPE
Netherlands
CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).
Request for a quoteSIMCO-ION EUROPE
Netherlands
CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).
Request for a quoteSIMCO-ION EUROPE
Netherlands
A compact high voltage supply with an adjustable output voltage of 0 - 20 kV (with a maximum current of 0,7 mA) clearly shown on the digital display. State-of-the art electronics are employed with a remote control option. The power supply is available with a positive or negative output voltage. A warning lamp lights up if the system is overloaded or in the event of spark-over. Features - Output voltage of 0 – 20 kV - Available with a positive or negative output voltage - Remote control is possible - A warning lamp lights up if the system is overloaded or in the event of spark-over - 180 ° reversible control panel equipped with membrane switches
Request for a quoteSIMCO-ION EUROPE
Netherlands
This nozzle has been designed especially for neutralising and cleaning (small) bottles on the inside, etc. Ionisation takes place at the end of the tube from which the air is blown. The high-voltage point is not shockless. The tubes are available in two diameters and in a required length. Features - Working distance: 150 mm max. - Air consumption with 1/4” tube: 4 Nm3/h using 1 bar - Air consumption with 3/8” tube: 8,5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitter - Especially designed for neutralising and cleaning (small) bottles on the inside
Request for a quoteSIMCO-ION EUROPE
Netherlands
The MultiPowerMaster or MPM is part of the high voltage power unit range. It features a broad range of input voltages, from 100240-V AC/5,060 Hz as well as electronically stabilized output voltage. The output voltage is factory preset to 7, 5, 4, and 3.3 kV. Red and green LEDs are incorporated in the top face of the unit. There is an option for the MPM to be fitted with an I/O connector for interfacing with a PLC, the F.E. Optional I/O signals are available for overload, high voltage present, and remote on and off. A 24-V power source is featured with the I/O connector, which enables use with the Typhoon air pressure sensor.
Request for a quoteSIMCO-ION EUROPE
Netherlands
This power unit is equipped with two high-voltage transformers with 180°phase-shifted output voltages. As a result, the anti-static bars connected to the power unit produce positive and negative ions simultaneously. This ensures optimal neutralization of static charges even at very high velocities. This power unit is fitted with two high-voltage indicators and an on/off switch with an indicator lamp. Feeatures - Suitable for very high production velocities - Fitted with two high-voltage indicators - Fitted with an on/off switch with an indicator lamp
Request for a quoteSIMCO-ION EUROPE
Netherlands
The standard model has a modern styling featuring easy-access control and connections. It is equipped with an on/off switch with an indicator lamp as well as a high-voltage indicator lamp. This lamp will extinguish if the system is malfunctioning. 4 ionisers can be connected as a maximum. Features - Provides high-voltage to 4 ionisers as a maximum - Equipped with an on/off switch with an indicator lamp - Equipped with a high-voltage indicator lamp - UL approved
Request for a quoteSIMCO-ION EUROPE
Netherlands
The tube diameter is adjusted to the existing tube system. And so is the number of integrated anti-static bars, based on the diameter. Simco-Ion anti-static bars can also be integrated in a tube provided by the client. The anti-static bars are arranged in two series. They are connected to a two-phase power unit to ensure optimal ionisation at high velocities. Features - Custom size pipe - Optimal ionisation at high velocities - Can be integrated in a tube provided by the client
Request for a quoteSIMCO-ION EUROPE
Netherlands
The Flat ionizing air nozzle is used to clean and neutralize electrostatically charged surfaces. The use of compressed air allows awkward places to be neutralized and cleaned as well. Connected to a Simco power unit, the ionizing air nozzles produce an air flow which is rich in positive and negative ions. When this air flow is pointed to an electrostatically charged area, electrons are exchanged until the area is neutralized. This makes that the material is neutralized during the blow-off process and prevents the blown-off particles from being re-attracted. The current of the Flat Nozzle is limited, so that the emitter point is safe to touch. The Flat Nozzle is especially suitable for neutralising at the feeding and delivery sections of machines in the printing industry. Features - Working distance: 50-300 mm - Air consumption: 5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitters
Request for a quoteSIMCO-ION EUROPE
Netherlands
The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly
Request for a quoteSIMCO-ION EUROPE
Netherlands
The Cobra ionizing air gun is excellently suited for heavy-duty industrial applications. It has a lightweight durable gun body made of highimpact plastic. The airflow is controlled by the trigger. The air flow is amplified by a minimum factor of 6 : 1 by drawing in ambient air through the rear. The high-voltage point integrated aerodynamically in the gun body cleans itself during use. The gun comes standard with 6 metres of cable. Two guns at most can be connected to a single power unit. - Working distance: 600 mm max. - It comes standard with 6 metres cable, 12 metre is also possible - Ideal for heavy-duty industrial applications - The emitter pin is cleaned during use
Request for a quoteResults for
Components- electronic - Import exportNumber of results
45 ProductsCompany type