Results for
AVK REWAG
Netherlands
745/11-112 – GRIP PLAST COUPLING (GP), TENSILE / AXIAL RESTRAINT, FOR ALL PLASTIC PIPES, STAINLESS STEEL 316, NBR
Request for a quoteAVK REWAG
Netherlands
Grip Plast type coupling (tensile / axial restraint) to connect all plastic pipes.For water and neutral liquids -30°C up to +110° C
Request for a quoteAVK REWAG
Netherlands
The AVK Orion program consists of a wide range straight couplings, flange adapters, spigot couplings and reducer couplings. These are universally applicable to steel, cast iron, AC, PVC and PE pipes with an outside diameter of 46 to 358 mm. A coupling per nominal size.
Request for a quoteAVK REWAG
Netherlands
Repico® is our latest addition to the extensive product range of pipe couplings and repair clamps. AVK’s Repico® product program consists of stainless steel pipe couplings and repair couplings for pipe diameters from DN 15 up to DN 2000. The Repico® range offers a quick and simple connection solution for all pipes with possibility of angular deflection and easy handling due to the compact and light weight design. The Repico® products can be used within the markets: industry, shipbuilding, gas, sewage, water and firefighting. Pipe coupling or repair coupling? The main difference of a Repico® repair clamp compared to a Repico® coupling is that the rubber seal is not one piece and it has no grip rings. The split seal allows the clamp to be put around the pipe but has the same progressive sealing. Repico® pipe couplings (or repair couplings) have several advantages over a traditional connection (repair) methode: A Repico® coupling takes only minutes to install and requires hardly any...
Request for a quoteAVK REWAG
Netherlands
The Quick Repair (QR) transition coupling sets a new standard for quick but professional repairing of leaking pipe connections. The QR coupling is maintenance free and made entirely of stainless steel AISI 304 with a rubber sealing (EPDM or NBR) inside and is therefore fully protected against corrosion. The wedges are easy to assemble without using a special tool and you only have to clean the sealing surfaces. Furthermore a big benefit of the QR coupling is that you don’t have to stop the flow during mounting, the pipeline stays operational. This sustainable professional solution means a lot of time gain for the mechanic.
Request for a quoteAVK REWAG
Netherlands
The Repico repair couplings offer solutions to repair leaking pipes, elbows and welds. The pipe can be damaged or the integrity has degraded. This can be a temporary or permanent repair. All repair couplings have hinges or locks allowing the clamp to be “wrapped” around the damaged area. It requires less space than the traditional repair clamp, is able to resist higher pressures and is easier to install. A repair coupling offers a quicker solution than replacing a pipe section and much less cost is involved. Spills into the environment or loss of valuable products can be stopped faster than most other methods offering a high integrity solution. Having several of them in stock can resolve unwanted situations by just torqueing a few bolts. The RH type has 1 lock and 1 hinge, it opens as a shell and “wraps” around the pipe. Analogue to the Slip type we also offer a 2, 3 and 4 lock configuration in the repair version. To repair long radius elbows we offer a 1 bolt version of the...
Request for a quoteAVK REWAG
Netherlands
The coupling side of the Repico range consists of restraint (tensile) and non-restraint (non-tensile) couplings. Restraint, where the pipe is fixed within the coupling. The economic version is our GLP, for medium pressures in an economic configuration we have the GMP, the standard version is the G type and for higher pressures with bigger sizes we offer the GF. These are all for metal pipes. Available in Q3 is the GP, the restraint version for plastic pipes. Non restraint, where the pipe needs to be restrained in the pipe supports or otherwise. The S type has 1 lock (set of bolts) and is the standard version, for bigger sizes we offer the SD which has 2 locks, the ST with 3 locks and the SQ with 4 locks. Besides the standard length versions we also offer a longer version of the coupling: SL, SDL, SQL & STL. When the pressures of the standard version are not sufficient we can also offer a high pressure version: SF, SDF, SQF & STF. Of course also available for the long...
Request for a quoteAVK REWAG
Netherlands
Fast and easy installation (no use of repair tape) Cleaning of pipeline only where the sealing takes place Light weight Bolt free to assemble Max. working pressure 10 bar Developed with at least 30 years of funtionality (under normal conditions) Resistant to vibrations of pipeline Steel pipe diameter 1″, 1 1/4″, 1 1/2″ and 2″
Request for a quoteAVK REWAG
Netherlands
Fast and easy installation (no use of repair tape) Cleaning of pipeline only where the sealing takes place Light weight Bolt free to assemble Maintenance free Max. working pressure 300 mbar Functionality will remain at least 30 years (under normal conditions) Resistant to vibrations of pipeline Steel pipe diameter 1″ and 1 1/4″
Request for a quoteAVK REWAG
Netherlands
Repair coupling for elbows (only for long radius elbows, R >= 1.5D), bends or weld provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 13-500 Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 53 bar (769 PSI) depending on size Main components of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
Repair coupling for elbows (only for long radius elbows, R >= 1.5D), bends or weld provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 13-500 Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 53 bar (769 PSI) depending on size Main components of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
Repair coupling with two locks long version provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 100 up to 150 mm (2.4″ to 5.9″). From DN 200 also available in length 300 or 400 mm (11.7″ or 15.6″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
Repair coupling with two locks long version provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 100 up to 150 mm (2.4″ to 5.9″). From DN 200 also available in length 300 or 400 mm (11.7″ or 15.6″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
Repair coupling with two locks provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 60 up to 150 mm (2.4″ to 5.9″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range PN 7-42 (Bar) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
Repair coupling with two locks provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 60 up to 150 mm (2.4″ to 5.9″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range PN 7-42 (Bar) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
Repair coupling with two locks provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 60 up to 150 mm (2.4″ to 5.9″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight
Request for a quoteAVK REWAG
Netherlands
: Hinge type repair coupling long version provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 25-600 Progressive sealing Available in different lenghts from 100 up to 250 mm (3.9″ up to 9.8″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620PSI) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AVK REWAG
Netherlands
: Completely made out of stainless steel 316. Green PTFE coated bolts. Sealing against 42.7 bar (620psi) maximum up untill DN 50 (2″) and it has a progressive sealing. Available in different lenghts from 100 to 250 mm (3.9″ to 9.8″). No special tools or skilled people are required to install the Repico® repair clamps. Quick to install (minutes). It requires limited space for installation, just a bit bigger than the pipe OD. Repico® repair clamps are more durable and stronger than repair tape. Light weight.
Request for a quoteAVK REWAG
Netherlands
Slip Grip type coupling provides a tensile / axial restraint and a non-tensile connection for all metal pipes, allows pipe section replacement and is available in DN 15-300. Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >=200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Slip Grip type coupling provides a tensile / axial restraint and a non-tensile connection for all metal pipes, allows pipe section replacement and is available in DN 15-300. Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >=200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Slip Grip type coupling provides a tensile / axial restraint and a non-tensile connection for all metal pipes, allows pipe section replacement and is available in DN 15-300. Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >=200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Grip type coupling provides a tensile / axial restraint connection for all metal pipes, allows pipe section replacement, suitable for high pressure, and is available in DN 15-400 Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Grip type coupling provides a tensile / axial restraint connection for all metal pipes, allows pipe section replacement, suitable for high pressure, and is available in DN 15-400 Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Grip type coupling provides a tensile / axial restraint connection for all metal pipes, allows pipe section replacement, suitable for high pressure, and is available in DN 15-400 Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Grip type coupling provides a tensile / axial restraint connection for all metal pipes, allows pipe section replacement, suitable for high pressure, and is available in DN 15-400 Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Slip type coupling with two locks provides a connection solution for all pipes that needs to be able to expand/contract and/or support the restraint pipe. Available in DN 15-1000 Progressive sealing Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 10,7 bar (155 PSI) depending on size Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Made of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Slip type coupling with two locks provides a connection solution for all pipes that needs to be able to expand/contract and/or support the restraint pipe. Available in DN 15-1000 Progressive sealing Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 10,7 bar (155 PSI) depending on size Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Made of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
Slip type coupling with two locks provides a connection solution for all pipes that needs to be able to expand/contract and/or support the restraint pipe. Available in DN 15-1000 Progressive sealing Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 10,7 bar (155 PSI) depending on size Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Made of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections
Request for a quoteAVK REWAG
Netherlands
The Repico® SD – Slip type coupling two locks is designed to replace traditional pipe joining methods(welded, flanged, threaded etc.). Sealing against 10.7 bar (165psi) maximum and it has a progressive sealing. Max. angular deflection 5°. Completely made out of stainless steel 316. Green PTFE coated bolts. No special tools or skilled people are required to install the Repico® pipe couplings. Light weight appr. 30% in comparison with flanged connections. Quick to install (minutes). It requires limited space for installation, just a bit bigger than the pipe OD. Connects different materials. No transition couplings required, allows pipe section replacement. 60% noise reduction compared to rigid connections.
Request for a quoteResults for
Couplings - Import exportNumber of results
39 ProductsCompany type