Results for
GEBUWIN
Netherlands
The EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. he EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. These winches have a high performance efficiency and are low in maintenance. When compared with the EW range, these winches have a larger cable storage and their welded steel frame provides a more stable construction. Also there are more additional options. The winches comply with protection classification IP55 and insulation classification F. As standard they are equipped with 2 speeds, as well as an optional 3 speed choice for every type. The connection duration is S3 - 25% up to S3 - 40%.
Request for a quoteGEBUWIN
Netherlands
The Gebuwin hand driven worm gear winch is known for its robust and compact construction. The hoisting capacity of the winch is calculated according to the first belt layer around the drum. The winch has a rear exit, which also enables it to be used as a pulling winch. As pulling winch, a load of up to approx. 2000 kg can be moved horizontally. The worm gear winch is fitted with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The crank can be adjusted in length and is recoil-free. All rotating parts run in maintenance free bearings. This winch is available in a grey/black paint and a zinc plated version, which gives an improved rust protection. Type and version coding: WB = worm gear belt winch: hoisting load of 750kg/ pulling load 2000kg GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns
Request for a quoteGEBUWIN
Netherlands
The Gebuwin battery drill powered worm gear winch has a robust build. This winch provides an effective solution for locations without electricity, as well in situations where hoisting of a load is needed for a limited distance. The winch has a flexible coupling for connecting a battery drilling machine or an electric drilling machine. The hoisting capacity of the winch is 200kg which is calculated according to the first cable layer on the cable drum. The closed worm gear box has a transmission with a self braking capacity. This self braking capacity ensures a hold of the load at any required height during hoisting and lowering. All rotating parts run in maintenance free bearings. The winch can be wall mounted or console mounted; it is available in grey/black paint.
Request for a quoteGEBUWIN
Netherlands
The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated.
Request for a quoteGEBUWIN
Netherlands
The worm gear winches as from 1000kg and up can also be driven by means of a portable air motor. The motor can be easily attached to the drive shaft. When there are more than one worm gear winches situated on one particular location, only one air motor is needed to drive them.
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated.
Request for a quoteGEBUWIN
Netherlands
A design of the present robust worm gear winches of 3 capacities which are constructed with a fully covered gearing (IP 54). The cable drum, the crank and all outgoing shafts are made of high quality 316 stainless steel. All fasteners are of A4 quality stainless steel. The surface treatment of the steel housing complies with the stringent paint specifications C5M according to DIN/ISO 12944. These winches can be utilized with: sea water and chemical installations. Available optional extra’s: grooved drum multi-cabled drum suitable adjustment for air motor drive AM5000
Request for a quoteGEBUWIN
Netherlands
This modern design foldable davit with 500 kg hoisting capacity rotates at a full 360 degrees. Whilst in folded mode, the davit can be inserted into a floor socket and in less than a minute then clicked out and be ready for use. Due to its light weight of 25kg, this davit can be used in numerous applications, including multi-usage positions. Maintenance has been greatly reduced due to its robust design and with an integrated winch and cable. The crank is of adjustable length, the paint specifications meets the DIN/ISO 12944 C1M. A zinc plated floor socket can be purchased as a separate order. Available optional extra’s: electro zinc plated finish (6-8 micron) specific length on request
Request for a quoteGEBUWIN
Netherlands
he Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two speeds.
Request for a quoteSPARES IN MOTION
Netherlands
Special tooling to hoist your wind turbine gearbox, wind turbine blades or complete nacelle.
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The Gebuwin range of hand driven spur gear winches are known for their robust construction. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. The TL1000 and TL1500 have a closed spur gear casing. The winches have a static safety factor of minimum 4. GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 SS = stainless steel 14301
Request for a quoteGEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteGEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteGEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteGEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteGEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteGEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEBUWIN
Netherlands
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteGEBUWIN
Netherlands
Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...
Request for a quoteResults for
Hoists - Import exportNumber of results
26 ProductsCountries
Company type
Category