Results for
SIMCO-ION EUROPE
Netherlands
A compact high voltage supply with an adjustable output voltage of 0 - 20 kV (with a maximum current of 0,7 mA) clearly shown on the digital display. State-of-the art electronics are employed with a remote control option. The power supply is available with a positive or negative output voltage. A warning lamp lights up if the system is overloaded or in the event of spark-over. Features - Output voltage of 0 – 20 kV - Available with a positive or negative output voltage - Remote control is possible - A warning lamp lights up if the system is overloaded or in the event of spark-over - 180 ° reversible control panel equipped with membrane switches
Request for a quoteSIMCO-ION EUROPE
Netherlands
The standard model has a modern styling featuring easy-access control and connections. It is equipped with an on/off switch with an indicator lamp as well as a high-voltage indicator lamp. This lamp will extinguish if the system is malfunctioning. 4 ionisers can be connected as a maximum. Features - Provides high-voltage to 4 ionisers as a maximum - Equipped with an on/off switch with an indicator lamp - Equipped with a high-voltage indicator lamp - UL approved
Request for a quoteSIMCO-ION EUROPE
Netherlands
Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Features - Convenient high-voltage indicator in pen size - There is no need to make contact with the device being controlled - The tip of the TensION illuminates when a voltage is detected
Request for a quoteSIMCO-ION EUROPE
Netherlands
The MultiPowerMaster or MPM is part of the high voltage power unit range. It features a broad range of input voltages, from 100240-V AC/5,060 Hz as well as electronically stabilized output voltage. The output voltage is factory preset to 7, 5, 4, and 3.3 kV. Red and green LEDs are incorporated in the top face of the unit. There is an option for the MPM to be fitted with an I/O connector for interfacing with a PLC, the F.E. Optional I/O signals are available for overload, high voltage present, and remote on and off. A 24-V power source is featured with the I/O connector, which enables use with the Typhoon air pressure sensor.
Request for a quoteSIMCO-ION EUROPE
Netherlands
The ThunderION Control Module provides the power and the control for up to four ThunderION anti-static bars. With this Control Module, you can control all connected ThunderION anti-static bars and check they are working correctly from a central location. The Control Module operates on the mains voltage, which can be turned on and off with a switch. A cable with a pre-assembled connector at each end links the ThunderION anti-static bar with the Control Module. This offers quick and easy assembly. All cables carry just 24 V. The Control Module enables you to check the functioning of each connected anti static bar. A green LED indicates that the bar is switched on. A red LED indicates that a fault has been detected. Via the I/O port, you also have the option of switching each bar on/off remotely and separately, as well as checking its correct functioning. Features - Provides power for up to 4 ThunderION anti-static bars - Controls the operation for up to 4 ThunderION anti-static bars by
Request for a quoteSIMCO-ION EUROPE
Netherlands
This power unit is equipped with two high-voltage transformers with 180°phase-shifted output voltages. As a result, the anti-static bars connected to the power unit produce positive and negative ions simultaneously. This ensures optimal neutralization of static charges even at very high velocities. This power unit is fitted with two high-voltage indicators and an on/off switch with an indicator lamp. Feeatures - Suitable for very high production velocities - Fitted with two high-voltage indicators - Fitted with an on/off switch with an indicator lamp
Request for a quoteSIMCO-ION EUROPE
Netherlands
The tube diameter is adjusted to the existing tube system. And so is the number of integrated anti-static bars, based on the diameter. Simco-Ion anti-static bars can also be integrated in a tube provided by the client. The anti-static bars are arranged in two series. They are connected to a two-phase power unit to ensure optimal ionisation at high velocities. Features - Custom size pipe - Optimal ionisation at high velocities - Can be integrated in a tube provided by the client
Request for a quoteSIMCO-ION EUROPE
Netherlands
This nozzle has been designed especially for neutralising and cleaning (small) bottles on the inside, etc. Ionisation takes place at the end of the tube from which the air is blown. The high-voltage point is not shockless. The tubes are available in two diameters and in a required length. Features - Working distance: 150 mm max. - Air consumption with 1/4” tube: 4 Nm3/h using 1 bar - Air consumption with 3/8” tube: 8,5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitter - Especially designed for neutralising and cleaning (small) bottles on the inside
Request for a quoteSIMCO-ION EUROPE
Netherlands
The Flat ionizing air nozzle is used to clean and neutralize electrostatically charged surfaces. The use of compressed air allows awkward places to be neutralized and cleaned as well. Connected to a Simco power unit, the ionizing air nozzles produce an air flow which is rich in positive and negative ions. When this air flow is pointed to an electrostatically charged area, electrons are exchanged until the area is neutralized. This makes that the material is neutralized during the blow-off process and prevents the blown-off particles from being re-attracted. The current of the Flat Nozzle is limited, so that the emitter point is safe to touch. The Flat Nozzle is especially suitable for neutralising at the feeding and delivery sections of machines in the printing industry. Features - Working distance: 50-300 mm - Air consumption: 5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitters
Request for a quoteSIMCO-ION EUROPE
Netherlands
The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly
Request for a quoteSIMCO-ION EUROPE
Netherlands
This type of anti-static bar, a more powerful version of the EP-Sh-N is highly effective and, with its long range, ideal for neutralization of static electricity on materials when the distance varies. Under certain conditions the maximum distance may even be as large as 600 mm. The construction of the bar is so rigid that bending of long bars is only minimal. Features - Long working distance: 600 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Each individual emitter pin of this anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. Another advantage is that the bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. Features - Medium working distance: 150 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling.
Request for a quoteSIMCO-ION EUROPE
Netherlands
Each individual emitter pin of the MaxION anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. The rugged MaxION static neutralising bar has a reinforced profile that minimises damage due to accidental bending. The ground reference is embedded in the reinforced profile. The slide slot on the backside of the MaxION enables the user to position the mounting bolts as required, allowing greater mounting flexibility. After cleaning the precision emitter pins with a brush you can sweep the contaminants out of each light-angled end of the bar easily. Features - Medium working distance: 400 mm max. - Minimal risk of deflection and deformation of the anti-static bar due to glassfiber reinforced plastic profile - Shockless touchable emitters - Compact
Request for a quoteSIMCO-ION EUROPE
Netherlands
MEJ anti-static bars are often used on production machines were short range ionisation is possible and where no moving machine parts are interfering the ionisation.The properties of this Simco-Ion anti-static bar are the same as those of type MEB, except that the MEJ type is round. Therefore mounting this anti-static bar via holes in the machine frame is possible. - Short working distance: 30 mm - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Round bar, can be easily mounted via holes in the machine frame
Request for a quoteSIMCO-ION EUROPE
Netherlands
MEB anti-static bars are often used on production machines were short range ionisation is possible and where no moving machine parts are interfering the ionisation. Each individual emitter point of this rectangular anti-static bar is coupled capacitively to the high voltage. You will there fore not get an electrical shock when the point is accidentally touched. Another advantage is that the bar continues to function properly when a number of points are short-circuited, for instance due to heavy fouling. Features - Short working distance: 30 mm - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Compact - Complementary equipment: A2A7S/MPM
Request for a quoteSIMCO-ION EUROPE
Netherlands
This anti-static bar has the same properties as the P-Sh-N. but is equipped with an integrated power unit, you do not need a high-voltage cable. This anti-static bar has been approved for use in certain hazardous environments. The 5m long primary cable shall be connected to the mains voltage. A neon lamp can indicate that high voltage is present. Under certain conditions the P-Sh-N-Ex bar is capable of neutralizing the materials from a maximum distance of 200 mm. Features - Short working distance: 200 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies. - Approved for use in certain explosion hazardous environments
Request for a quoteSIMCO-ION EUROPE
Netherlands
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIMCO-ION EUROPE
Netherlands
The emitter pins of the Super Service anti-static bars are directly coupled to the high voltage so that maximum ionising current is reached. These bars can be cleaned easily and therefore they are suited for being installed in places which may be subject to heavy fouling. Touching an emitter pin will cause an unpleasant electrical shock. These bars are usually installed in such a manner that the emitter pins cannot be touched by personnel. Features - Short working distance: 30 mm max. - Optimal neutralisation because the emitter pins are directly coupled to the high voltage - Is suited for being installed in places which may be subject to heavy fouling - Non-touch-safe emitters - Heat and chemical resistant - Compact
Request for a quoteResults for
Voltage - Import exportNumber of results
19 ProductsCompany type