Units - Import export

New concept! Maintenancefree track surface! Track surface doesn't require lubrication over long term use! IKO CLube Unit for Cam Followers is a lubrication part to mount into Cam Followers. Regular lubrication is not required as lubrication oil is supplied onto the outside diameter surface of the cam follower outer ring and track surface. Long term maintenance free track surface achieved.

The IKO Ball Slide, which uses aluminum alloy for the table and bed, is a lightweight and compact limited linear motion guide unit. Since the ball is guided by a cage made of synthetic resin and rotates on a high accuracy round shank way, it can obtain light and smooth motion. Easy Mounting Since the product is properly preloaded, it can easily gain a stable linear motion only by fixing it against precisely grounded mounting surface with bolts. Excellent Corrosion Resistance The ball and way are made of stainless steel and the surface of table and bed have anodic oxidization coating, allowing high corrosion resistance.

Most commonly used Fiber array units apply V-groove substrates with a 250 µm or 127 µm pitch. The number of fibers (channels) depend on the application. Contact us to discuss your specific requirements on integrated photonics. Photos in the slider below are a courtesy of LioniX and PhiX.

APU Series Air Pressurization Units & Filtration Units are widely used in industrial plants where needed such a precise air quality. These units are fully customizable upon the needs and the requirements of the projects. Absorbing residual dust, harmful gases and odors, APU Series are perfect to be used in such environments where human health is of high importance, as well as for equipment protection.

You might have a malfunction in your air conditioning system and the system has not been designed with any redundancy scenario. Or, your current setup does not satisfy you from efficiency point of view. Besides, you might only need air conditioning during certain peak times of the year. You might also be in the rental business for cooling equipment. In this case, MAC Series Mobile Cooling Units are the perfect solution for you. With its plug and play feature, you can start up and run your operation instantly.

No more waiting for specific weather temperature and humidity conditions to cool your grain silos with the conventional ventilation systems. You can run the TKS Series Grain Dryers (Grain Cooling) to store or stock your grain with specifically required conditions in your silos even under dessert heat or tropical rains. TKS series help you protect your products such as cereal, soy, rice from losses caused by overheating, molding, infestation, and drying.

TMS presents its long years of experience and knowledge in Marine, Steel and other heavy industries in a new generation Self Contained unit (ISCM) You can connect to the system anywhere in the world, change the operation parameters, troubleshoot and log datas. You can make all system settings on the touch panel. Fan and plenum sections can be separated from the body so that you can easily fit them even in the tightest places. Since all panels of the device are detachable, you can easily perform maintenance operations. The new type ISCM unit uses the most environmentally friendly refrigerants in the market. The product, in which the use of R513a refrigerant with a GWP of 631 is implemented for the first time, can also be manufactured with conventional refrigerants R134a and R407c, if requested. Modular Design Ease of Maintenance Corrosion Resistant Reliable Operation on Pitch and Roll Air Cooling Quiet Operation Environmentally Friendly Refrigerant

IRW Water Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.IRW Water Cooled Type Rooftop units operates with environmentally friendly refrigerants. The air distribution and return are carried out by air ducting which is the best idea for the complex areas to cool down. Various compressor and refrigerant type usages brings trouble-free operation with high cooling water temperatures. Heating can be carried out with electrical heater, steam, hot water and thermal oil resources.

IRA Air Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

Features Self-cleaning nozzle header. Inner brushes for nozzle cleaning are built-in. By rotating inner brushes, nozzle orifices are cleaned thoroughly, and foreign objects inside the pipe are flushed out through the drain. Available in the manual brush-cleaning type (the inner brushes are rotated by turning handwheel) and air-driven automatic type (which allows remote control of spray and cleaning modes). *1) Spray capacity per one nozzle (not per header). Applications [Steelmaking] In Continuous Galvanizing Line (CGL), Electrolytic Galvanizing Line (EGL), Continuous Pickling Line (CPL), and Continuous Annealing Line (CAL)

Features Energy-saving industrial humidification systems with pneumatic spray nozzles producing Dry Fog**. With world-leading technology, our AKIMist® “E” produces ultra-fine “non-wetting” Dry Fog, which doesn’t wet the objects it touches. Prevents dryness and static electricity, enabling higher manufactured product quality and lower defect rates. The running cost is one-fifth of a comparable steam humidification system. For spaying chemical solution, chemical-resistant AKIMist® “E” TN is available. *1) Spray volume per one AKIMist® “E” with nozzle type 03C. AKIMist® “E” with nozzle type 03B: 3.3–13.2 ℓ/hr, nozzle type 04E: 3.0–12.0 ℓ/hr *2) Sauter mean droplet diameter of AKIMist® “E” with nozzle type 03C. AKIMist® “E” with nozzle type 03B: 12 μm, nozzle type 04E: 10 μm *3) Air consumption of AKIMist® “E” with nozzle type 03C and 03B. AKIMist® “E” with nozzle type 04E: 36–144 ℓ/min,...

A wide variaty of control units, from Vestas CT unites to Mita-Teknik controllers and specific Dan control parts for Neg Micon and many other controls for Nordex, Vestas and other wind turbine brands.

A wide variaty of control units, from Vestas CT unites to Mita-Teknik controllers and specific Dan control parts for Neg Micon and many other controls for Nordex, Vestas and other wind turbine brands.

The MultiPowerMaster or MPM is part of the high voltage power unit range. It features a broad range of input voltages, from 100240-V AC/5,060 Hz as well as electronically stabilized output voltage. The output voltage is factory preset to 7, 5, 4, and 3.3 kV. Red and green LEDs are incorporated in the top face of the unit. There is an option for the MPM to be fitted with an I/O connector for interfacing with a PLC, the F.E. Optional I/O signals are available for overload, high voltage present, and remote on and off. A 24-V power source is featured with the I/O connector, which enables use with the Typhoon air pressure sensor.

This power unit is equipped with two high-voltage transformers with 180°phase-shifted output voltages. As a result, the anti-static bars connected to the power unit produce positive and negative ions simultaneously. This ensures optimal neutralization of static charges even at very high velocities. This power unit is fitted with two high-voltage indicators and an on/off switch with an indicator lamp. Feeatures - Suitable for very high production velocities - Fitted with two high-voltage indicators - Fitted with an on/off switch with an indicator lamp

The standard model has a modern styling featuring easy-access control and connections. It is equipped with an on/off switch with an indicator lamp as well as a high-voltage indicator lamp. This lamp will extinguish if the system is malfunctioning. 4 ionisers can be connected as a maximum. Features - Provides high-voltage to 4 ionisers as a maximum - Equipped with an on/off switch with an indicator lamp - Equipped with a high-voltage indicator lamp - UL approved

The Wentex SET Frame Module is a lightweight aluminum system for quickly and easily creating seg frame visuals, exhibition stands or projection screens. It is a very modular system for a height of up to 6 meters. You can make the frame as angular and wide as you want. In addition, both front and rear projections are possible, as well as creating an intermediate compartment for seamless LED screen installations. This is an ideal framing solution for silicone-edge graphics at conferences, exhibitions, trade shows, seminars, and TV studios. Frame modules are available in different sizes, allowing you to create different combinations and setups. They are equipped with a quickly built-in stacking system. Clamps ensure that frames can be securely and seamlessly attached to each other and Wentex Base Plates can be used to create a strong and stable base. Also suitable for modulaire tradeshow booths.