Pumps - Import export

Gearbox oil pumps, Motor pitch control pumps and other hydralical pumps for Bonus, Vestas, GE and others.

TWO STAGE, HIGH PRESSURE HAND PUMP Two-speed reduces handle strokes so you work faster and easier. Built-in, protected pressure gauge. Ergonomic design for minimal handle effort. Lightweight aluminum reservoir. Easily accessible refill port. Needle valve allows full control when releasing tension.

1,500 BAR (21,750 PSI) SUBSEA & LARGE TENSIONER APPLICATIONS High flow tension pump. Corrosion resistant frame works well for applications near salt water. High flow ideal for subsea applications where compressed air is the required power source. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 150mm (6") Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

TOPSIDE BOLT TENSIONER & HYDRAULIC NUT PUMP Standard flow tension pump. Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power source is compressed air. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 6" (150mm) Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

21,750 PSI (1,500 BAR) HIGH PRESSURE ELECTRIC PUMP The SPXFlow PE8 is a very high pressure pump that incorporates proven design for reliable operation. It is based on proven pump design for reliability in rugged bolt tensioning applications. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122˚F (50˚C) ambient Proven design = Proven reliability Enhanced Usability: Light Weight and portable: 45.5 lb (20.6 kg) [without oil] Quick Release, removable control pendant (15 ft / 5 m) Removable 4" (100 mm), calibration-capable, gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) SPX Tensioners are designed to daisy-chain together so multiple tools can run off one pump Compact design fits into tight spaces Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The RWP55-BS has been the market leading pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Powerful 3 hp motor starts under load Retract side internal relief valve protects tool Use with single or double acting tools. Not for lifting applications 4" calibration capable gauge Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Has a retract port pressure selector 10,000 psi (1,500) CAUTION: This system should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The original electric pump! Features a simplified electrical control box and a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PE55 base pump Retract side internal relief valve protects tool 4-way 2-position solenoid valve standard Use with single or double acting tools, not for lifting applications Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The PE55TWP-BS has been the market leading electric pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Two Speed High Performance pump Retract side internal relief valve protects tool Hand remote Four-tool manifold (-4 models only) allow use of up to four tools simultaneously 4" calibration capable gauge Use with single or double acting tools Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve 1,500 psi (103 bar) pressure retract relief valve CAUTION: This system should not be used for lifting applications.

10,000 PSI (700 BAR) COMPACT ELECTRIC TORQUE WRENCH PUMP The SPXFlow PE39 is compact and capable of being used in a vertical or horizontal orientation. Based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122˚F (50˚C) ambient Proven design = proven reliability Enhanced Usability: Light weight and portable: 39 lb (17.7 kg) Removable control pendant (15 ft / 5 m cord length) Removable 4" (100 mm) calibration-capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Vertical or horizontal operation Easy install cooling fan as option Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

10,000 PSI (700 BAR) INFINITY SERIES (ISP) AIR PUMP The SPX FLOW PA60A is an Infinity Stage Air Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Light weight and portable: 77 lb (34.9 kg) [without oil] PA60APF5FP Light weight and portable: 88 lb (40.1 kg) [without oil] PA60APF5FMPR Removable control pendant (25 ft / 7.6 m) Removable 4" (100 mm), calibration-capable gauge CE ATEX Ex II 2 GDc T4 4 port manifold available to power up to 4 tools from a single pump (not for lifting applications) Fewer parts for lower service cost Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

10,000 PSI (700 BAR) INFINITY SERIES (ISP) ELECTRIC PUMP The SPX FLOW PE45 is an Infinite Stage Electric Pump which increases productivity on the job by providing continuous pressure for up to two times the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Light Weight: 71 lb (32.2 kg) [without oil] Removable control pendant (15 ft / 5 m) Removable (4") 100 mm, calibration-capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) 4 tool manifold available powers up to 4 tools from a single pump (not for lifting applications) High flow to get work done faster Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.