Nozzle - Import export

Features Capable of generating wide-angle flat spray even at low liquid pressure. Clog-resistant Spray direction is 75° to the nozzle axis. Applications Cleaning: Conveyor belts, film, eliminator plates, plate glass, planks Foam breaking: Wastewater treatment, paper manufacturers Cooling: Conveyor belts, roofs, tanks Water screen: Fire protection, heat protection, deodorization

Features Flat spray nozzles specially designed for descaling. Produces razor-like thin, sharp stream with even spray distribution and high spray impact. TDSS series, with much higher spray impact, increases erosion depth by 20% compared to the conventional model. Water-saving. Applications Descaling: rolling process in steelmaking

Features Flat spray pattern with uniform distribution throughout pattern area. Small 1/8 pipe connection size for high pressure cleaning. Applications High pressure cleaning: Automotive, containers, tanks, wire and felt parts of paper making machines, wire cylinders, filter presses, other industrial cleaning and degreasing

Features Flat spray pattern with uniform distribution throughout pattern area. Even spray impact across the entire spray area. Applications Cleaning: Automotive, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization

Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Easy installation just by drilling a hole (φ14.3 mm) on a pipe and inserting a nozzle. Easy assemble and maintenance by quick detachable nozzles. Adaptors, color-coded by size, are available in 1″, 1 “, 1 “, 2”, 25A, and 30A. Spray tips are also color-coded by spray capacity for easy identification. Adjust spray direction within 50 degrees as desired. Applications Pre-treatment for painting: Car, home electric appliances Cleaning: water rinsing after acid treatment of steel plates, water rinsing process in food factory

Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Quick-detachable design helps to greatly reduce maintenance time. Easy mounting/dismounting with a knurled tab. No falling off of tip or packing when removing the nozzle part. [INVV series (plastic)] Made of high chemical and heat resistant PP (polypropylene). Nozzle tips are color-coded by spray capacity for easy identification. Applications [INVV series (plastic)] Cleaning Etching Stripping For the applications where precise spray alignment and/or periodic maintenance is required

Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. Applications Cleaning: Automotive, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization

Features Full cone spray pattern with a round impact area and uniform distribution. Features smallest spray capacity among full cone spray nozzles. Unique design developed from new engineering concept to produce fine atomization by impinging two inflows inside vortex chamber. Ceramic orifice and closer provide excellent wear-resistance. Applications Spraying: Oils, lubricants, glues, etchants Cleaning: Galvanizing, gas Cooling: Machinery, gas

Features Full cone spray pattern with a round impact area and uniform distribution. Spray angle of 120ﾟ provides larger spray coverage than other nozzles. Spray capacity ranges from small to medium. X-shaped whirler provides large free passage diameter for minimal clogging. Applications Cleaning: Gas, incinerator fumes, machinery, eliminators, screen, tanks, parts, crushed stones, earth and sand Cooling: Gas, machineries, tanks, steel plates Spraying: Water treatment, aeration, foam breaking, fire extinguishing, dust suppression, sea water desalination

Features Full cone spray pattern with a round impact area and uniform distribution. Unique design to produce fine atomization by liquid impinging inside chamber without a whirler. No-whirler design with large free passage diameter minimizes clogging. Spraying axis 90ﾟ from the axis of the nozzle inlet. For spraying chemicals such as hydrochloric acid, PPS-injection molded AJP are available for excellent chemical and heat resistance. Applications Cleaning: Pre-painting treatment, washing booths, machine parts, gas, incinerator fumes Cooling: Steel plates, copper pieces, gas Spraying: Aeration, foam breaking Others: Applications where re-circulated water is being used or clogging is a concern

Features Square full cone spray pattern with uniform distribution. Wide spray angle of 90–100° provides large spray coverage. Square full cone spray pattern leaves no gaps in multiple-nozzle arrangements. X-shaped whirler provides large free passage diameter for minimal clogging. a Applications Cleaning: Gas, incinerator fumes, machinery, eliminators, screen, tanks, parts, crushed stones, earth and sand Cooling: Gas, machinery, tanks, steels Spraying: Waste water treatment, foam breaking, fire extinguishing, dust suppression

Features Self-cleaning nozzle header. Inner brushes for nozzle cleaning are built-in. By rotating inner brushes, nozzle orifices are cleaned thoroughly, and foreign objects inside the pipe are flushed out through the drain. Available in the manual brush-cleaning type (the inner brushes are rotated by turning handwheel) and air-driven automatic type (which allows remote control of spray and cleaning modes). *1) Spray capacity per one nozzle (not per header). Applications [Steelmaking] In Continuous Galvanizing Line (CGL), Electrolytic Galvanizing Line (EGL), Continuous Pickling Line (CPL), and Continuous Annealing Line (CAL)

Features Taking in surrounding liquid, EJX series solution agitation nozzle spouts out 3-4 times more volume than the amount supplied. Simple structure and compact design suitable for multiple-nozzle arrangement. Applications Solution agitation, preventing deposition, uniformizing concentration and pH Cleaning in liquids Submerged etching Plating

Features Cleaning inside pipes and tubes, moving itself by means of spraying solid stream jets in different directions as driving force. High impact jets effectively remove scale and dirt inside pipes. Applications Cleaning: Pipes, drains, water and wastewater pipes, tubes of heat exchangers and cooling machines Others: Removing scale and rust

Features Easy installation and removal by just attaching a nozzle to this connector. Quick-detachable design helps to greatly reduce maintenance time. Easy mounting/dismounting with a knurled tab. Made of high chemical and heat resistant plastic (compared to PVC). Nozzle connector thread size is Rc 1/8″ or Rc 1/4″. Note: The upper-left photo is INCO with a wide-angle flat spray nozzle YYP series. Applications Cleaning Etching Stripping For the applications where precise spray alignment and/or periodic maintenance is required Quick-detachable nozzle connectors with thread size Rc1/8 or Rc1/4

Features Allows adjustment of spray direction over a range of 50 degrees as desired. [Metal type] Withstands pressure design. Available from 1/8″ to 3/4″ in pipe connection sizes. Use UT-S303 (stainless steel 303) at pressure under 15 MPa (ca. 150 bar), UT-B (brass) under 4 MPa (ca. 40 bar). [Plastic type] Lightweight, high seal performance. Spray direction is adjustable while spraying (up to 0.3 MPa, ca. 3 bar). Use UT-FRPP at pressure under 1 MPa (ca. 10 bar, at room temperature). Cautions for both types: Do not use under conditions where water hammer or sudden change of water pressure occurs. For use with KB and KKBP series nozzles, a different type of UT Ball Joints are required. Inquire with us for details. Applications Accurate nozzle alignment is possible after connected to a pipe. Where large changes in spray direction are required depending on nozzle application such as cleaning and air blowing.

Features Compact cleaning nozzles for low- and medium-pressure specifications. Available in threaded joint type or pin connection type. In addition to standard types, we can also provide a special-order spray nozzle to meet customer’s tank specifications and applications. Applications Tank cleaning, vessel cleaning

Features Low-speed rotating nozzles for tanks/containers cleaning. Rotation of 5–10 rpm at 0.3 MPa (ca. 3 bar). Maximized contact time between cleaning object and spray liquid achieves higher cleaning effect. High heat-resistant. Applications Cleaning of tanks, containers, filling machines, and conveyors

Features High chemical-resistant rotating cleaning nozzles. Solid stream (ES series) or flat fan-shaped spray pattern (ESV series). Compact and simple design. Rotation is driven solely by the flow of the cleaning fluid. Clean design with little dripping from the nozzle tip even when installed upward. Applications Cleaning by volume of spray flow, not by spray impact Cleaning of tanks and filling machines

Features Pressure loss is minimal to enable high spray impact performance. Long thin slit with tapered nose is suitable for installation in a narrow space such as between support rolls. Drastic energy saving is achieved by switching from compressor-using type. Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment

Features Air booster nozzles producing powerful air blow with small air consumption. Taking in surrounding air, EJA series provides ten times more* blown air than the volume supplied. Graduated scale markings on the nozzle allow for accurate adjustment of blown air volume and intake air volume. Made of stainless steel with high durability. *1/4F EJA 300 Applications Blowing off dust/paint dust, Rejection of inferior products, Blowing off drying Blowing extraneous liquids or powders off of items passing by on the conveyor belt

Features High impact solid stream of air flown from eight holes. Compact design, lightweight. Quiet operation with noise level reduced by more than 10 dB (A) compared to conventional one-hole air nozzle. Max. allowable temperature: [Plastic] 60℃ (140 °F), [Stainless steel] 400℃ (750 °F). Applications Blow-off drying: Blow-off drying for engine block Blowing off: Rejection of inferior products Cooling: Pinpoint cooling for molded plastic

Features Long flat air nozzle with 100 mm–1,400 mm in spray width. 13 spray width types are available. Max. allowable temperature: 400℃ (750 °F) Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block Blowing off dust/paint dust/debris, Blowing off inferior products (rejection of inferior products) Cooling: Pinpoint cooling for molded plastic Others: Detachment, Cleaning, etc.

Features 42-mm wide air nozzle. Taking in surrounding air and boosts multiplied air flow. Uniform distribution resulting from the unique flat design. Max. allowable temperature: [Plastic] 120℃ (245°F), [Stainless steel] 400℃ (750 °F) Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block Blowing off dust/paint dust, Rejection of inferior products, Blowing off dust for steel plate Cooling: Pinpoint cooling for molded plastic

Features Full cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 60 μm or less (*3). Clog-resistant design. Optimal for spraying viscous liquids. Liquid siphon feed type (liquid pressure device is not required). Use with the liquid pressure device is also possible. *1) Measured at compressed air pressure of 0.3 MPa (ca. 3 bar), liquid pressure of 0 MPa (Liquid siphon feed), and siphon height 100 mm. *2) Free passage diameter of liquid inlet. *3) Measured by Laser Doppler Method. Applications Spraying: Mold release agent, deodorant, oil, surface treatment agent, rust preventive, lubricant, honey, glaze, insecticide, aqueous urea, slurry, other viscous liquid

Features Pneumatic slit-laminar nozzle with uniform spray distribution throughout the entire spray pattern area. While multiple-nozzle alignment of conventional pneumatic spray nozzles leaves some spots unwashed, PSN nozzles provide uniform spray distribution and achieve a complete cleaning, leaving no spot unwashed. PSN can be used at a short distance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) and liquid pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) for PSN nozzle with slit length of 1000 mm and slit opening of 0.05 mm. Applications Cleaning: Glass substrate, liquid crystal Cooling: Steel plates, moldings Moisture control: Paper, cardboard [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning

Features Flat spray pneumatic nozzle producing semi-fine atomization with a mean droplet diameter of 80 μm or more (*3). Clog-resistant design due to large free passage diameter is suitable for spraying factory effluents and waste water. Simple structure, easy maintenance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca. 1 bar – 4 bar) and liquid pressure of 0.1–0.5 MPa (ca. 1 bar – 5 bar). *2) Free passage diameter of nozzle orifice for DOVVA-G 70° spray angle type. *3) Measured by Laser Doppler Method. Applications Denitration: Gas cooling Moisture control: Flue gas Combustion: Waste water

Features Liquid pressure type under the liquid pressures of 0.07–0.7 MPa (ca. 0.7 bar – 7 bar). Large turn-down ratio with minimal variation in spray angle. Uniform distribution suitable for multiple-nozzle arrangements. Large free passage diameter minimizes clogging. Standard spray angle of 55°, 70°, 95°, or 110°. Applications Cooling: Gas, steel plates, steel pieces, moldings, etc. [Steel making industry] Steel making process: Cooling continuous casted steel (slab, bloom, billet, beam blank, etc.) Rolling mill process: Cooling roll in heat treatment

Features Flat spray pneumatic nozzle producing semi-fine (and semi-coarse) atomization having a mean droplet diameter of 50μm or more. (*3) High spray impact with thin flat spray pattern and uniform distribution. Liquid pressure type under the liquid pressures of 0.2–0.5 MPa (ca. 2 bar – 5 bar). Large turn-down ratio with stable spray angle. Spray angle of 60° or 80° *1) Measured at compressed air pressure of 0.4 MPa (ca. 4 bar) and liquid pressure of 0.5 MPa (ca. 5 bar). *2) Free passage diameter of nozzle orifice. *3) Measured by Laser Doppler Method. Applications Cleaning: Printed circuit boards, liquid crystal, liquid crystal display, steel plates [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning