Cooling - Import export

The LogTag Glycol Temperature Buffer is specially designed to monitor and control the temperature of vaccines during storage and transportation. The glycon buffer reflects the temperature in a vial of vaccine. With this product, you control that vaccines are not exposed to high or low temperature changes.

Features 42-mm wide air nozzle. Taking in surrounding air and boosts multiplied air flow. Uniform distribution resulting from the unique flat design. Max. allowable temperature: [Plastic] 120℃ (245°F), [Stainless steel] 400℃ (750 °F) Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block Blowing off dust/paint dust, Rejection of inferior products, Blowing off dust for steel plate Cooling: Pinpoint cooling for molded plastic

VI Series Inrow type Crane Cabin Coolers are bringing breath of fresh air to crane cabins. Process cranes in Steel, Non-Ferrous metals, Mining, Oil&Gas, Cement, Paper, Offshore industries have the most challenging environmental conditions. Extremely dusty and corrosive, very high and low ambient temperatures are enemies of crane cabin coolers and cause failures and stoppages sometimes. Perfect solution on keeping the A/C in protected environment! The whole A/C unit except condenser unit is kept inside on the cabin where is more safe than outside conditions. No worries, we still keep all the precautions for condenser unit too. There are still a lot of options for condenser unit such as Cu/Cu or SS coils as well as various coating options for coil and fans. The models are perfect match with the sizes of E-Panels in Electrical cabins. They are stackable next to each other or to be placed in spread delivering

ISCW Water Cooled Type Self Contained units with their compact, durable, robust and attractive cabinet fit any working environment such as dusty and corrosive. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

APU Series Air Pressurization Units & Filtration Units are widely used in industrial plants where needed such a precise air quality. These units are fully customizable upon the needs and the requirements of the projects. Absorbing residual dust, harmful gases and odors, APU Series are perfect to be used in such environments where human health is of high importance, as well as for equipment protection.

You might have a malfunction in your air conditioning system and the system has not been designed with any redundancy scenario. Or, your current setup does not satisfy you from efficiency point of view. Besides, you might only need air conditioning during certain peak times of the year. You might also be in the rental business for cooling equipment. In this case, MAC Series Mobile Cooling Units are the perfect solution for you. With its plug and play feature, you can start up and run your operation instantly.

No more waiting for specific weather temperature and humidity conditions to cool your grain silos with the conventional ventilation systems. You can run the TKS Series Grain Dryers (Grain Cooling) to store or stock your grain with specifically required conditions in your silos even under dessert heat or tropical rains. TKS series help you protect your products such as cereal, soy, rice from losses caused by overheating, molding, infestation, and drying.

TMS presents its long years of experience and knowledge in Marine, Steel and other heavy industries in a new generation Self Contained unit (ISCM) You can connect to the system anywhere in the world, change the operation parameters, troubleshoot and log datas. You can make all system settings on the touch panel. Fan and plenum sections can be separated from the body so that you can easily fit them even in the tightest places. Since all panels of the device are detachable, you can easily perform maintenance operations. The new type ISCM unit uses the most environmentally friendly refrigerants in the market. The product, in which the use of R513a refrigerant with a GWP of 631 is implemented for the first time, can also be manufactured with conventional refrigerants R134a and R407c, if requested. Modular Design Ease of Maintenance Corrosion Resistant Reliable Operation on Pitch and Roll Air Cooling Quiet Operation Environmentally Friendly Refrigerant

IRA Air Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

VM Medium Type Units are designed for medium-duty industrial applications such as process cranes, operator cabins, shelters, containers in metallurgy, oil&gas, cement, energy, automotive, mining and port industries. The main features and advantages of this product are; plug & play compact design, less needs for erection services. The cooling, fan only, heating function modes are available while the filtering is always operating.

IRW Water Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.IRW Water Cooled Type Rooftop units operates with environmentally friendly refrigerants. The air distribution and return are carried out by air ducting which is the best idea for the complex areas to cool down. Various compressor and refrigerant type usages brings trouble-free operation with high cooling water temperatures. Heating can be carried out with electrical heater, steam, hot water and thermal oil resources.

ISW Water Cooled Type Split units are designed for the areas where there is no infrastructure for cooling solution. Split units consist of two parts as being indoor and outdoor, so these two parts are not affected from environmental conditions of each other’s. Thus the solution is optimized by necessary updates against to harsh environmental conditions such as dust, humidity, corrosive and high ambient temperatures.

ISA Air Cooled Split Type units are designed for the areas where there is no infrastructure for cooling solution. ISA brings the full independency for the operation, doesn’t need for the resources of your premises except the electricity. Split units consist of two parts as being indoor and outdoor, so these two parts are not affected from environmental conditions of each other’s. Thus, the solution is optimized by necessary updates against too harsh environmental conditions such as dust, humidity, corrosive and high ambient temperatures.

ISCA Air Cooled Type Self Contained units with their compact, durable, robust and attractive cabinet fit any working environment such as dusty and corrosive. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

Multiple variants of this product in the portfolio for different flow requirements. Typically controls the flow of the coolant in the vehicle and used in heating and cooling circuits. Version includes cartridge type, subbase mounted and manifold mounted valve. 2, 3, 4 and 5 port options Typically 12V and 24V Operating temperature range up to +130 deg C IP6K7 and IPK9K

Searching for an air cooler specific to your application and according to your requirements? In that case Van West Koeltechniek bv is the right partner. We develop and assemble air coolers specifically to your requirements. As the company started almost 100 years ago we prove to be a reliable partner with much knowledge and experience. Our air coolers travel all around the world under private label of our major international customers.

The sheet metal is made of stainless steel 304 and powder coated steel in the color black RAL9011. The aluminum heat exchanger is insulated with XPS and equipped with a stainless steel tap spiral with a diameter of Ø8.5 / 9.5mm and connections of 1/2 "male thread. The cooler is equipped with overcurrent and high pressure protections. A signal lamp and a potential-free contact are provided as a fault indication. The control is done by an electronic controller with display.

Our cooling elements are used in many different industries. The cooling elements are often used in places where flake ice cannot be used, for example when transporting fish by air. Because cooling elements are closed and therefore do not release melt water when they thaw, cooling elements are also used in the Pharma, organic and fresh produce industry.

Our cooling elements are used in many different industries. A cooling element is often used in places where flake ice cannot be used, for example when transporting fish by air. Because cooling elements are closed and therefore do not release melt water when they thaw, cooling elements are also used in the Pharma, organic and fresh produce industry. Number of pieces in a single box: 48 pieces. Number of pieces per pallet: 3720 (in boxes of 40 to 60 pieces)

Ice pack, cool pack, cool packs & gel pack, these are the three different names for the same product. Ice packs and cool packs are filled with gel, which is why the name gel pack came from. Our ice/cool packs are used in many different industries. The ice packs are often used in places where flake ice cannot be used, such as transporting fish by air or sending meat or medicines by post. Because Gelpacks are closed and therefore do not release melt water when they thaw, Gelpacks are often used in the Pharma, organic and fresh produce industry.

Ice pack, cool pack, cool packs & gel pack, these are the three different names for the same product. Ice packs and cool packs are filled with gel, which is why the name gel pack came from. Our ice/cool packs are used in many different industries. The ice packs are often used in places where flake ice cannot be used, such as transporting fish by air or sending meat or medicines by post. Because Gelpacks are closed and therefore do not release melt water when they thaw, Gelpacks are often used in the Pharma, organic and fresh produce industry.

Outside dimensions: 500l x 400b x 150h mm Inner size: 440l x 340b x 120h mm Wall thickness: 30 mm Material: Polystyrene 100 *216 pieces delivered on two pallets Our EPS, commonly called polystyrene boxes, cooling boxes, Isomo, Tempex, Styropor and Depron are extremely suitable for sending your products chilled or frozen. Our EPS boxes also protect your products. The EPS boxes have a very good insulation value and are also reusable.

Ice pack, cool pack, cool packs & gel pack, these are the three different names for the same product. Ice packs and cool packs are filled with gel, which is why the name gel pack came from. Our ice/cool packs are used in many different industries. The ice packs are often used in places where flake ice cannot be used, such as transporting fish by air or sending meat or medicines by post. Because Gelpacks are closed and therefore do not release melt water when they thaw, Gelpacks are often used in the Pharma, organic and fresh produce industry.

Features Flat spray pneumatic nozzle producing semi-fine atomization with a mean droplet diameter of 80 μm or more (*3). Clog-resistant design due to large free passage diameter is suitable for spraying factory effluents and waste water. Simple structure, easy maintenance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca. 1 bar – 4 bar) and liquid pressure of 0.1–0.5 MPa (ca. 1 bar – 5 bar). *2) Free passage diameter of nozzle orifice for DOVVA-G 70° spray angle type. *3) Measured by Laser Doppler Method. Applications Denitration: Gas cooling Moisture control: Flue gas Combustion: Waste water

Features Full cone spray pattern with a round superimposed impact area. 7 pcs. of KB series hollow cone spray nozzles are screwed into a very compact header. Capable of generating a large volume of fine atomization. The whirl chamber is formed by a ceramic orifice and closer, which provides excellent wear resistance. Applications Gas cooling, Cleaning, Moisture control, Humidification, Dust suppression