Compact - Import export

The outer ring of the Standard Type Crossed Roller Bearings is made of two split pieces, which are bolted together to prevent separation during transportation or mounting, enabling easy handling. These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact IKO.

VC Compact Type units are designed for heavy-duty applications in harsh environmental conditions such as process cranes in metallurgy, oil & gas, cement, mining and port industries. The main features and advantages of this product are; plug & play compact design, ease of maintenance, less needs for erection services. The cooling, fan only and heating function modes are available while the filtering is always operating.

The WWKGD30 is a compact water cooler that can easily be installed in, for example, coffee machines or the kitchen cupboard. The built-in thermostat allows you to set the desired temperature. The water cooler can be easily connected to the water supply network. The water cooler requires hardly any maintenance and always supplies refreshing cooled water.

The WWKGD24 is a compact water cooler that can easily be installed in, for example, coffee machines or a kitchen cupboard. The built-in water cooler can be easily connected to the water supply network. It requires hardly any maintenance and always supplies refreshing cooled water.

10,000 PSI (700 BAR) COMPACT ELECTRIC TORQUE WRENCH PUMP The SPXFlow PE39 is compact and capable of being used in a vertical or horizontal orientation. Based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122˚F (50˚C) ambient Proven design = proven reliability Enhanced Usability: Light weight and portable: 39 lb (17.7 kg) Removable control pendant (15 ft / 5 m cord length) Removable 4" (100 mm) calibration-capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Vertical or horizontal operation Easy install cooling fan as option Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

Features Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa (ca. 1 bar – 3 bar). Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio). Spray angle of 110 °, 80 °, or 45 °. *1) Spray angle measured at compressed air pressure of 0.3 MPa (ca. 3 bar) and liquid pressure of 0.1 MPa (ca. 1 bar). *2) Free passage diameter of nozzle orifice. *3) Measured by Laser Doppler Method. Applications Spraying, Cooling, Moisture control, Cleaning, Dust suppression, etc.

Features High impact solid stream of air flown from eight holes. Compact design, lightweight. Quiet operation with noise level reduced by more than 10 dB (A) compared to conventional one-hole air nozzle. Max. allowable temperature: [Plastic] 60℃ (140 °F), [Stainless steel] 400℃ (750 °F). Applications Blow-off drying: Blow-off drying for engine block Blowing off: Rejection of inferior products Cooling: Pinpoint cooling for molded plastic

Features Low-pressure type rotating nozzle. Solid stream jet provides high cleaning performance. As the nozzle part is movable, it is easy to insert into and eject from a tank or equipment. Compact design allows for installation in a tank with a small inlet. *1) Spray capacity for each model: RJ3-2-Φ7: 103 L/min (at 0.3 MPa, ca. 3 bar)–169 L/min (at 0.8 MPa, ca. 8 bar) RJ3-2-Φ8: 127 L/min (at 0.3 MPa, ca. 3 bar)–207 L/min (at 0.8 MPa, ca. 8 bar) RJ3-4-Φ6: 146 L/min (at 0.3 MPa, ca. 3 bar)–239 L/min (at 0.8 MPa, ca. 8 bar) *2) Reach distance of RJ3-4-Φ6 is approx. 9 meter in radius. Applications Cleaning of tanks, chests, and containers, cleaning inside the chests (material tanks of papermaking)

Features High chemical-resistant rotating cleaning nozzles. Solid stream (ES series) or flat fan-shaped spray pattern (ESV series). Compact and simple design. Rotation is driven solely by the flow of the cleaning fluid. Clean design with little dripping from the nozzle tip even when installed upward. Applications Cleaning by volume of spray flow, not by spray impact Cleaning of tanks and filling machines

Features Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less.** Ultra-compact size. About 42 mm in total length including control adaptor. Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa (ca. 1 bar – 3 bar). Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio). Spray angle of 110 °, 80 °, or 45 °.* Capable of spraying smallest flow rate among all of our pneumatic spray nozzles. Spray ON/OFF can be regulated by switching the pilot air ON/OFF (adaptor type SP) or by turning compressed air ON/OFF (adaptor type SN). *Spray angle measured at compressed air pressure of 0.3 MPa (ca. 3 bar) and liquid pressure of 0.1 MPa (ca. 1 bar). **Mean droplet diameter measured by Laser Doppler Method.