Results for
INTERLINEX B.V.
Netherlands
Lifting arms Convenient knob J-hooks Non-slip mat Locking device
Request for a quoteINTERLINEX B.V.
Netherlands
Cap 65mm/14 flutes: Toyota, Nissan Cap 65-67mm/14 flutes : Ford, Mazda Cap 68mm/14 flutes : Mazda, Ford, Subaru Cap 73mm/14 flutes : Toyota, Audi, Rover, Lexus, Austin Cap 74-76mm/15 flutes : VW, Audi, GM, Mercedes, Opel Cap 75-77mm/15 flutes : Fiat, Renault Cap 76mm/14 flutes : Motorcraft, Ford Cap 76mm/30 flutes : Fiat, Lancia Cap 80mm/15 flutes : Mazda, Subaru, Toyota, Honda, Nissan Cap 80-82mm/15 flutes : Volvo Cap 90mm/15 flutes : Fiat
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Modular design, can accommodate modulating and Fail safe option Self contained, only requires electrical power. Fail-safe close, open or fail freeze. ESD option – Logical or hard wired Partial stroke test capability 4-20 mA or 0 -10 VDC input signal optional Full featured LCD display for installation, commissioning and operation SIL 2 & SIL 3 capable to IEC 61508:2010 Available torque range from 25 to 6,00,000 Nm for rotary and 1.2 to 8000 kN force for linear actuator Water tight up to and including IP65,optional IP68 (10m / 96h) EXD explosion proof enclosure Extended diagnostics and functionality over various communication networks Supported communication network includes Modbus ® , Profibus ® , Foundation Fieldbus ® and HART ®Data logging and event record capabilities Optional operating temperature -50 °C to +70 °C Integrated hydraulic system
Request for a quoteBRAND ENERGY SERVICE
Netherlands
Clients should use original Caterpillar lubricants for several key reasons: 1. **Optimal Performance**: These lubricants are tailored for Caterpillar engines, ensuring peak performance and efficiency. 2. **Equipment Longevity**: They offer superior protection against rust, corrosion, and wear, extending equipment life. 3. **Warranty Compliance**: Using non-approved lubricants can void the warranty. 4. **Reduced Downtime**: Proper lubrication minimizes breakdowns, enhancing productivity. 5. **Fuel Efficiency**: Caterpillar lubricants reduce friction, improving fuel efficiency. 6. **Engine Cleanliness**: They prevent sludge and deposits, keeping engines clean and efficient. 7. **Environmental Considerations**: These lubricants are often more eco-friendly, reducing emissions. 8. **Compatibility and Innovation**: They ensure compatibility with the latest Caterpillar advancements. 9. **Comprehensive Support**: Caterpillar provides extensive support and resources for users.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Multiple variants of this product in the portfolio for different flow requirements. Typically controls the flow of the coolant in the vehicle and used in heating and cooling circuits. Version includes cartridge type, subbase mounted and manifold mounted valve.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
The Valve Manifold integrates Air, Fuel & Dosing valves, Pressure sensor, and Check valves. Eliminates the need of injector, though a nozzle is used downstream for dosing 12 Volts DC with PWM & 100% Duty
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Auto drain valve fuel water separator inbuilt with a water sensor. Automatically detects and drains. Optional redundancy features with a float mechanism to prevent fuel leak. Customize it for different adaptions like bolted, screwed on the fuel module or integrate bowl.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Multiple version, size and flow rates and pressure rating of fuel shut of valve available in Rotex portfolio. Used across the fuel circuit in all types of vehicles 12V /24V DC, PWM controlled Bespoke Solutions.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Rotex offers a varied electromechanical product for various on-vehicle critical applications like power train, chassis and cabin solutions. All products designed and manufactured by Rotex is compatible with automotive media like air, fuel, coolant, Adblue, exhaust gases, etc. Rotex also has a dedicated manufacturing area with Class A cleanliness level as per ISO 16232 and its manufacturing location are certified to IATF 16949 and AS 9100D.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
With one inlet and multiple delivery ports, distribute the compressed air from the air compressors across the pneumatic circuit of the vehicle. Typically chassis mounted 24V IP67 Compliant
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
High performance automotive valves for off road & on road vehicles. ROTEX has successfully designed and manufactured many solutions for the Automotive segment for various application like DPF regeneration systems, Exhaust breaks, Fuel shut off, Transmission system, Tipping application, HVAC, Differential locking and many more. ROTEX manufacturing plants are ISO 9001, ISO 14001, OHSAS 18001, IATF 16949 certified and qualified for VDA 6.3 QMS Certificate: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
With one inlet and multiple delivery ports, distribute the compressed air from the air compressors across the pneumatic circuit of the vehicle. Typically chassis mounted 24V IP67 Compliant
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
This is compact 3 port 3 position valves typically used for control of air bellow in seats for height control. Typically fill the air, hold it inside the bellow and drain as per height needed. Operate using a switch and optionally integrate memory function. 12V/24V 0 to 8 or 10 bar pressure rating IP64 compliant
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Multiple variants of this product in the portfolio for different flow requirements. Typically controls the flow of the coolant in the vehicle and used in heating and cooling circuits. Version includes cartridge type, subbase mounted and manifold mounted valve. 2, 3, 4 and 5 port options Typically 12V and 24V Operating temperature range up to +130 deg C IP6K7 and IPK9K
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Pneumatic control of the PTO for the tippers. These valves when actuated lead to engagement of the hydraulic pump with the clutch for the tipping 24V DC IP6K9K Compliant 0 to 12 bar pressure rating Vibration compatibility up to 20g Actuation Cycles > 1 million
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
For pneumatic control of the tipper position (up/down), this hand lever operated valve when actuated, operates the hydraulic valve and engages PTO. Optionaly can be integrated with Rotex’s patented Solenoid valve integration to prevent tipper operation in unsafe positions IP6K5 Compliant 0 to 10 bar pressure rating Vibration compatibility up to 15g
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ROTEX AUTOMATION EUROPE
Netherlands
2 Way Normally Close High Pressure Solenoid Valve Media: Air | Fuel | Intert gas | Liquid | LPG | Oil | Vacuum | Water Application: Analyser | Drain | Dispensing Certificate: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
These are solenoid valve control boxes with a 7/9 valve system which is subbase mounted on the transmission. Upon actuation enable clutch engagement / gear shift control 28V DC IP6K9K Compliant 4 to 12 bar pressure rating Vibration compatibility up to 17g Actuation Cycles > 1 million
Request for a quoteMIFA ALUMINIUM B.V.
Netherlands
In our assembly department, we assemble components into semi-finished or complete products. These often involve Mifa components and components supplied by the client or purchased externally. This allows us to assemble the profiles we produce into complete end products. We prefer to deliver a complete component. This is why we also perform other processes in-house, such as assembly, bending, sealing, soldering, welding, and masking. With our knowledge and experience, we know how to apply the right technology for each product. Along with machining and surface treatment (please read our respective whitepapers on our website), the other processes enables us to provide the most optimum product. We have many processes and related knowledge in-house. The customer can leave it all to us, and this also means a reduction of logistics operations, which is beneficial to the quality of the final product while also reducing costs.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Rotex offers a broad range of gas solenoid valves for numerous applications that include CO2 solenoid valve, Electric air solenoid valve, shut off gas solenoid valve, hydrogen solenoid valve, solenoid valve for oxygen and solenoid valve for nitrogen, Natural gas solenoid valves like LPG gas solenoid valve, CNG solenoid valve, Propane solenoid valve etc. Gas solenoid valves are used in industrial gas burners, atmospheric gas boilers, and other gas-consuming applications. Depending on the port, gas solenoid valve is available as 2 way gas solenoid valve, 3 way gas solenoid valve. Rotex also offers gas solenoid valve in various voltage ranges like 12v, 24v, 220 v, etc.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Rotex Automation is the leading manufacturer and supplier of a wide range of Solenoid valves. We have satisfied customers all over the world. Rotex offers a wide range of 12v solenoid valves for varieties of applications. These valves can be classified as 12v water solenoid valves, air solenoid valves 12v, 12v gas solenoid valves, 2-way solenoid valves 12v, 3- way solenoid valves 12v, 5-way solenoid valves 12v.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Rotex Automation is the leading solenoid valve manufacturer in India and supplier of a wide range of Solenoid valves. We have satisfied customers all over the world. Rotex offers a wide range of 24v dc solenoid valves for varieties of applications. These valves can be classified as 24v water solenoid valves, 24v air solenoid valves, 24v gas solenoid valves, 2-way solenoid valves 24v, 24v 3-way solenoid valves, 5-way solenoid valves 24v.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
This is 3 port normally closed valve. Upon actuation, it controls linear actuator attached to the flap of the exhaust brake valve 12V or 24V DC Pressure rating 0 -8bar and 12 bar Compliant to IP6K7
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
For any vehicle that is operating for critical mission, retaining the continual mobility in adverse operating conditions is the most important attribute. Keeping in mind to positively impact the mobility, safety and efficiency of vehicle and its users Rotex has developed Central Tyre Inflation System (CTIS). CTIS provides ‘on-demand’ control over the air pressure in tyres. During adverse operating conditions like in deserts, snow and muddy/wet terrains, off-road operations and varying load conditions it is important the tyres provide tractions to keep vehicle moving. Central Tyre Inflation System has capability to adjust the pressure inside the tyre and attain optimum tyre foot-print that helps gaining the traction required for continual mobility.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Two-way solenoid valve is a common type of solenoid valve used in so many applications. Fluids can be safely controlled and put to optimal use with the help of valves. Many industrial applications require the use of such valves to be automated. In order to automate and conveniently utilize the full potential of fluids, solenoid valves are essential. A general-purpose 2-way Solenoid valve is used where the application should be able to start and stop the flow as and when needed. These valves have two ports that each connect to either the inlet or the outlet and use an internal plunger to open or close an orifice to control the fluid flowing through those valves. It can be configured as "Normally Open" or "Normally Closed". A Normally open two-way solenoid valve allows the media to pass through its port when the coil is de-energized and a Normally Closed valve allows the media to pass through its port when the coil is energized.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Rotex offers a wide range of 2 Port Solenoid Valves to suit variety of applications. These valves can be basically classified as Normally Closed or Normally Open based on the valve condition when the solenoid is energized. Further they can be classified as Direct Acting, Diaphragm Operated, Internal / External Pilot Operated.
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
Our vast experience of 54 years, serving 7100 clients has given us insight about the common problems that Industries faces while using solenoid valve for their application. Let's analyse the problems and repercussions that Solenoid valve user’s experiences in their application
Request for a quoteROTEX AUTOMATION EUROPE
Netherlands
For Air shut off in systems like DPF and SCR or control (on/off) of gaseous media like CNG 8 – 36 Volts DC Duty cycle 100%
Request for a quoteResults for
Hydraulic- - Import exportNumber of results
57 ProductsCountries
Company type