Epdm - Import export

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Studs protected with plastic protection caps.

: Clamp made out of a pre-rolled plate of stainless steel AISI 316. Clamp is manufactured with a hinge point in order to simplify installation. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of double band repair clamp is max. 24 mm (depends on diameter pipe). Clamp available in different diameters: DN 80 up to DN 600. Clamp available in different lenghts: 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for water: 16 bar for DN 80 up to DN 150, 10 bar for DN 175 up to DN 450 and 6 bar from DN 500. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Design with welded AISI 316 studs and fingers. Clamp equipped with hand grip to simplify installation. Clamp is completely pickled and passivated after welding. Clamp is standard manufactured with BSP thread (other thread on request). Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Indication pressure class for gas: 4 bar for DN 40 up to DN 150, 3 bar for DN 175 up to...

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling) Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffles structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Studs protected with plastic protection caps.

: Clamp made out of a pre-rolled plate of stainless steel AISI 304. Clamp is manufactured with a hinge point in order to simplify installation. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of double band repair clamp is max. 24 mm (depends on diameter pipe). Clamp available in different diameters: DN 80 up to DN 600. Clamp available in different lenghts: 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 80 up to DN 150, 10 bar for DN 175 up to DN 450 and 6 bar from DN 500. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Studs protected with plastic protection caps.

Feature Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers (50 mm center to center). Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 24 bar for DN 40 up to DN 150, 16 bar for DN 175 up to DN 300 and 10 bar for DN 350. Studs protected with plastic protection caps.

These sealing profiles are used to finish sharp edges and also to seal gaps. The profiles usually consist of PVC with a bulb of moss rubber, but profiles in EPDM and silicone are also possible.

We supply various types of SEBS - EPDM / Silicon and EPDM rubber products of the highest quality. SEBS is a thermoplastic elastomer (TPE) with hardnesses between 20 and 85 shore A. They are also called technical rubbers, synthetic rubbers or elastoplastics, but then added with syrene. In our range you will find a wide range of rubber products, but we are also happy to be of service with customized SEBS rubber. Advantages of SEBS rubber SEBS rubber is comparable to EPDM, but has the advantage that small series can be made for a favorable price. Another big advantage is the resistance of this material. For example, SEBS rubber is UV and ozone resistant and resistant to extreme heat and cold. This ensures that this type of rubber is very widely applicable. SEBS has been described by Greenpeace as an acceptable alternative to PVC in toys. Polyethylene (PE) and Polypropylene (PP) are the most commonly used building blocks for SEBS.

Profiles for Industrial Applications. In the large group of industrial applications (refrigeration and air-conditioning technology, machines, production lines, switchgear housings, wind power, tracked crane systems, containers, etc.) we produce individual sealing systems tailored to our customers’ needs. Special designs made on short notice--even in small series--made of diverse plastic or elastomer qualities, or combinations of both materials or assemblies lets us be your technical problem solver. Our huge stock of standard profiles makes us a reliable partner for a wide-range of applications. Sealing Profiles Through application-specific production of rings, frames or fixed lengths, the product is precisely tailored to any purpose. The function of the profile is optimally executed even in the radiuses or corners. We manufacture ready-made profiles in various processes, from cold bonding, film bonding, injection molding to sealing.

Application Widely used weather and cold resistant industrial rubber grade with good mechanical properties and chemical resistance. Suitable for open air and good ozone resistance.

Application Excellent ozone and sunlight resistance and suitable for most chemicals, cooling water, compressed air (oilfree).

Steam 6 bar (90 psi) Hot water 15 bar (225 psi) FDA 3A Arrêté du 09/11/94 D Application Saturated steam and hot water supply in general industrial applications Specially designed for use in the food and dairy industry. Also suitable for liquid food and alcoholic drinks.

Outer wall Black conductive EPDM wear resistant and ozone resistant. Application Dispense and transfer Diesel Exhaust Fluid / AUS32 Urea Solution. Tested according to ISO 222412 to ensure high purity of the dissolved solution. Options JB Rubber & Industry can provide the ad blue hose with the couplings you require.

Reinforcement High tensile strength textile cords and embedded steel spiral wire antistatic wire. Outer wall Black conductive EPDM abrasion, ozone and fire resistant. Application Suction and delivery of acid and chemicals. Suitable for use in potentially explosive atmospheres. Temperature range 30 °C +100 °C (22°F +212 °F) depending on the chemical being transported Options JB Rubber & Industry can provide the chemical hose with the couplings you require.

Summary 4008-5 Black

Summary 3010-5 Black

Summary 3015-5 Black

Summary 3010-10 Black

Summary 3015-10 Black

Summary 4005-5 Black