Electrostatics - Import export

Extension IQ Easy: an extension to the IQ Easy Platform The IQ Easy platform with at least one Manager IQ Easy can be extended with the Extension IQ Easy to control an additional 6 devices. The Extension IQ Easy comprises of a Control unit without a display. Status LED's show the power on and overall warning or alarm status. Up to 6 IQ devices can be connected to the Extension IQ Easy. The 24V DC power distribution is routed via the Extension. So no extra cables!This makes the connection of a device even easier than connection to a single desktop power supply. The Extension IQ Easy is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 devices connected. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible by using multiple Extension IQ Easy's. Each Extension adds another 6 devices to the system with a maximum of 30 devices.

Manager IQ Easy: the heart of the IQ Easy Platform Manager IQ Easy Introducing a new level of static control; the heart of the new IQ Easy platform is the Manager IQ Easy. It comprises of a Control unit with a 7'' LCD touch screen, provides information from all the connected devices and makes it easy to change and monitor status and parameters. Up to 6 IQ devices can be directly connected to the Manager IQ Easy. The 24V DC power distribution is routed via the Manager, so no extra cables! This makes the connection of a device even easier than connection to a single desktop power supply. The Manager IQ is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 ­connected devices. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible using the Extension IQ Easy. This adds ­another 6 devices to the system with a maximum of 30.

Sensor IQ Easy: that measures the electrostatic charge A sensor that measures the electrostatic charge of a web can be added to the IQ Easy platform. The Sensor IQ Easy is a bar type device that can hold op to 16 sensor heads. Each sensor head can be placed on a strategical position across the web to monitor the electrostatic charge. All data of each sensor head is communicated to the Manager IQ Easy and stored for process monitoring. For dirty environments or for precautionary protection of the sensor heads, the Sensor IQ Easy bar is equipped with a compressed air connection. Using only a very low pressure and air volume dirt entering the orifice of the sensors is prevented. Anti static bars or charging generators in the system can act on data received from a sensor. This makes it possible to control the static charge level on the web in real time using a closed loop feed back and correction routine.

Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Features - Convenient high-voltage indicator in pen size - There is no need to make contact with the device being controlled - The tip of the TensION illuminates when a voltage is detected

The FMX-004 is a convenient, compact and pocketsized electrostatic fieldmeter. With this fieldmeter you can measure and store the field strength and polarity. It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LEDs. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. The unique bicolour display shows the measured value both numerical and graphically. The status of the battery is shown on the display. features - Accurate measurements - Electricity conductive plastic housing with an earth connection - Possible to carry out measurements in awkward places - Indicator for battery status - Pocket-sized

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 6 - Dimensions: Length 166 x Ø 20 mm

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and thePinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 5 - Dimensions: Length 166 x Ø 20 mm

The HDR charging bar suits high velocity applications. Each individual point being fitted with a resistor, so the chance of spark-over is strongly reduced. features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suits high velocity applications - Chance of spark-over is strongly reduced

These rugged charging bars are used in a variety of industrial applications. The slot at the rear of the charging bar permits easy mounting. HDC charging bars are provided with a resistor to avoid failures in the machine control system in the event of accidental spark-over. The cable output may be straight or right-angled (90°). Features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suitable for a variety of industrial applications - At an unforeseen spark it doesn’t create an interruption in the machine control

The IML Spider is a versatile electrode for direct charging for IML applications. It consists of a IML Spiderblock with built-in resistors to prevent accidental sparking. The IML Spider Block has 8 output ports, withresistors per port, for connection of up to 8 flexible charging electrodes. An additional output port isprovided for daisy chaining complementary IML Spider Blocks. All connection ports are equipped with quick connect plugs. Electrodes are available in lengths of 300 and 500 mm and a special 500 mm long one that can be tailored during installation by use of a special tool. Interconnection cables are available in lengths of 0,5 , 1 , 2 and 3 metres. Connection cable for use with the CM type generator are standard 2 , 5 and 10 metres long. The IML Spider can be used for IML applications in conjunction with IML generators with a maximum output of 18 kV.