Kit - Import export

This affordable EL-WiFi toolkit is designed to help users install temperature probes in fridges/freezers as tidily as possible. The kit includes a seal designed to cushion a fridge/freezer door gasket around a temperature probe cable, maximising efficiency by reducing heat transfer through the gasket, and maintaining the integrity of the seal. Follow the quick start guide printed on the packaging to tidily install temperature probes in just a few minutes. Then rest assured that your device is monitoring temperature in the correct position within the fridge/freezer without causing any damage to the probe cable or fridge/freezer seal.

20 x 60mm press sleeves;  34 – 72mm (in 2mm steps)  44 – 82mm (in 2mm steps)  4 x 350mm pulling spindles;  M10 – M12 – M14 – M16

13x 1/4 " sockets  7x 1/4 " deep wall sockets  5x 1/4 " e-sockets  2x 1/4 " extension rod 2' and 4"  1x 1/4 " sliding T-Bar  1x 1/4 " universal coupler  1x 1/4" coupler  1x 1/4 " quick Release ratchet lever  30x 1/4 " bit sockets  10x 3/8 " sockets  6x 3/8 " sockets  5x 3/8 " e-sockets  1x 3/8 " extention bar 5"  1x 3/8 " coupling €55,-  1x 3/8 " spark plug cap  1x 3/8 " quick release ratchet hanlde  18x 1/2 " sockets  5x 1/2 " deep sockets  3x 1/2 " e-sockets  2x 1/2 " extension bar 5" & 10”  1x 1/2 " universal joint  1x 1/2 " coupling  2x 1/2 " spark plug cap  1x 1/2 " quick release ratchet handle  1x allen wrench set  24x 30mm bits  1x spinner handle

1x 330mm compression handle  3x pressure pieces  20mm  26mm  34mm

Press sleeves  38-48mm  40-50mm  42-52mm  44-54mm  46-56mm  48-58mm  50-60mm  52-62mm  54-64mm  Pulling spindles  M10, M12, M14, M16, M18  56-64mm  56-66mm  58-68mm  60-70mm  62-72mm  64-74mm  66-76mm  68-78mm  70-80mm  72-82mm  75-85mm  80-90mm

1 x Universal pressure bell  1 x Spindle unit with ball bearing  3 x Pressure piece  2 x Half shell coupling black, for bearing diam. 2.8"  2 x Half shell coupling chrome, for bearing diam. 2.6"  2 x Half shell coupling anodized, for bearing diam. 2.4"  2 x Fixing screw M12 x 1.5 for half shell  6 x Fixing screw M14 x 1.5 for half shell  Suitable for new VAG models (2002+)

1 x Sealing tongs 270mm  2 x Deep seal holders (diameter):  10.8mm  14.8mm  7 x Adapters;  5mm  5.5mm  6mm  6.5mm  7mm  8mm  9.5m

1 x tie rod spreader with 11/16” (17.5mm) wedge opening  1 x ball joint separator with 15/16” (23.8mm) jaw opening,  1 x pitman arm wedge with 1-1/8” (28.6mm) opening,  1 x 7-3/4" (196.9mm) Kunrled striking handle for use with conventional hammers  1 x 6-3/4" (171.5mm) adapter handle for use with air hammer

10 x spreader sleeves (8-11 mm, 12-17 mm, 18-23 mm, 24-29 mm, 30- 34 mm, 34-38 mm, 39-43 mm, 44-48 mm, 49-53 mm, 54-58 mm)  3 x Screw adapter (M10 x 1.5P/M6 x 1.0P, M10 x 1.5P/M8 x 1.25P, M10 x 1.5P)  1 x sliding hammer (290 mm)  1 x 2-claw puller with spool  1 x Nozzle (12.1 cm)

Features 33,000 pound (15 metric ton) spreader features an incorporated wedge design that provides structural support to the shoes throughout the tool range to maximize tool longevity and performance. Jaws fully supported by wedge for excellent durability Ideal for fl anges with narrow gaps - only 0.2 inches (5 mm) required for entry Compact and lightweight design - only 11.28 inches (287 mm) long at a weight of 7 pounds (3,2 kg) Suitable for the offshore environment due to superior corrosion resistance Quick adjustments for various tasks due to interchangeable shoes (both stepped and serrated) Includes female half coupler - mates to standard 3/8" male half coupler (No. 9798). Topside Flange Spreader Kit Standard duty blow molded case organizes and protects the complete spreading kit Extra storage space for additional step shoes and up to 3 step blocks 15 metric ton wedge-driven spreader Jaws fully supported by wedge for excellent durability * The speader kit is available in...

Features 33,000 pound (15 metric ton) spreader features an incorporated wedge design that provides structural support to the shoes throughout the tool range to maximize tool longevity and performance. Jaws fully supported by wedge for excellent durability Ideal for fl anges with narrow gaps - only 0.2 inches (5 mm) required for entry Compact and lightweight design - only 11.28 inches (287 mm) long at a weight of 7 pounds (3.2 kg) Suitable for the offshore environment due to superior corrosion resistance Quick adjustments for various tasks due to interchangeable shoes (both stepped and serrated) Includes female half coupler - mates to standard 3/8" male half coupler (No. 9798). Offshore Flange Spreader Kit Heavy duty case is more rugged and compact, ideal for offshore applications Weather proof gasket seal and pressure equalization valvese Tighter product spacing for easier helicopter transport 15 metric ton wedge-driven spreader Jaws fully supported by wedge for excellent...