Results for
NIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
These bearings are doublerow, full complement with a low cross sectional height designed for use in sheaves. There are two types, sealed and shield type. They can withstand heavy radial loads and shock loads at comparatively lowspeed rotations, and can also withstand axial loads. It is easy to fix them axially to sheaves using the stop rings of the outer ring. The width of the inner ring is designed to be larger than that of the outer ring, so they require no spacer between sheaves. The structure is stable because the doublerow of rollers can withstand the moment loads caused by rope transition. The surfaces of these bearings are also treated to provide high corrosion resistance.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Roller Bearings are heavy duty bearings with rollers incorporated in a double row. They are nonseparable bearings with a high load rating. They can withstand not only radial loads but axial loads as well, which are supported at the contacts between the shoulders of the inner and outer rings and the end faces of the rollers. They should be used at the fixing side of a shaft. Like needle roller bearings, they are also compact. Roller bearing types include caged, full complement and the type for sheaves, and they can be selected based on the operating conditions. These bearings are used in heavyduty machinery such as construction equipment, and industrial machines.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
In this series, the caged cylindrical rollers, AZK, and the complete bearings, AZ, in which AZK are combined with an inner ring (WS) and an outer ring (GS) are available. The cage has a special precise structure which is highly rigid. The cylindrical rollers are outwardly arranged and guided by the cage with exact precision to enable them to withstand heavy loads, even at high rotation speeds.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO's Extended Life Specification Machined Type Needle Roller Bearings are treated with a newly developed special heat treatment that enhances the bearing's surface hardness and toughness, and suppresses the generation and growth of damage on the surface. Significant life extension can be achieved under high load or under the condition of lubrication contaminated with foreign substances. In a life comparison test, IKO's special heat treated Extended Life Series products lasted 5 times longer than standard heattreated products.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
In IKO Needle Roller Bearings with Separable Cage, the inner ring, outer ring and IKO needle roller cage are combined, but they can be separated easily. This type has a simple structure with high accuracy. In addition, the radial clearance can be freely selected by choosing an assembly combination. Because they use needle roller cages, these bearings have excellent rotational performance, and are best suited for massproduction, high accuracy products such as machine tools, textile machinery, and printing machines.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
Slim Type Crossed Roller Bearings are slim bearings having a small outside diameter against the bore diameter and a narrow width. In addition, types with cage, types with separator, and full complement types are available, which can be selected according to the intended use. Crossed Roller Bearings are compact bearings with their rollers alternately crossed at right angles to each other between inner and outer rings. The orthogonal array of rollers allows the bearing to handle complex loads simultaneously from any direction, which makes assembly possible without needing to worry about load direction.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
Mounting Holed Type Super Slim Crossed Roller Bearings CRBTF is a compact and light weight bearings which mounting holes are prepared on both inner and outer ring of Super Slim Type Crossed Roller Bearings with the ultraslim 5mm bearing width to make mounting to equipment easier. Features 1.We achived the ultraslim 5mm bearing width by IKO technology of miniature bearings production, and this bearing contributes to make equipments more compact. 2. Complicated mounting structures are not neccesary thanks to the mounting holes provided to both innner and outer rings which make it possible to mount directly to the mounting surface without a housing or a pressure plate.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
The outer ring of the Standard Type Crossed Roller Bearings is made of two split pieces, which are bolted together to prevent separation during transportation or mounting, enabling easy handling. These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact IKO.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
The Mounting Holed Type High Rigidity Crossed Roller Bearing has an integral structure (nonsplit) for both the inner and outer rings, with mounting holes that allows it to be easily attached to equipment. Further it is less subject to peripheral structures such as housing or pressure plate and realizes high rigidity and highaccuracy guidance. Rollers are arranged by intersecting orthogonally between inner ring and outer ring of the single structure. A separator, which can smoothly rotate rollers, is incorporated between rollers. The mounting holes in both inner and outer rings facilitate installation to your equipment. An open type and a sealed type are available. The sealed type incorporates special synthetic rubber sealing.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
High Rigidity Type Crossed Roller Bearing V has a solid onepiece construction for both inner and outer rings. Therefore, high accuracy and high rigidity are achieved, and mounting errors can be minimized. As separators are incorporated between the cylindrical rollers for smooth rotation, these bearings are suitable for applications where rotation speed is comparatively high. These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact IKO.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Roller Followers are bearings with needle rollers in the thick outer ring that are designed for outer ring rotation. There are separable and nonseparable models, double row cylindrical, and other models available. Roller Followers are widely used as follower bearings for various cam mechanisms and as guide rollers for linear motion in conveying equipment.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Combined Type Needle Roller Bearings are combinations of a radial bearing and a thrust bearing. Caged Needle Roller Bearings are used as radial bearings and thrust ball bearings or thrust roller bearings are used as thrust bearings. They are compact and very economical, and can be subjected to radial loads and axial loads simultaneously. They are widely used for machine tools, textile machinery, and industrial machinery.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
These bearings consist of a cage made from a steel plate, which is precisely press formed and surfacehardened, and needle rollers with a diameter variation within 2μm. They have a rigid structure and a high lubricantretaining capacity. As they have the lowest sectional height compared with other thrust bearings, they can be used instead of conventional thrust washers and can withstand highspeed rotations with a low coefficient of friction.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Thrust Bearings consist of precisely machined cages and rollers. They have high rigidity and high load capacity and can be used in small spaces. Thrust Needle Roller Bearings use needle rollers, while Thrust Roller Bearings use cylindrical rollers. Various types of raceway rings are available, and can be selected according to the operating conditions. When the bearing mounting surface of a machine is heattreated and finished by grinding, Thrust Bearings can be used without raceway rings, making the machine more compact. They are best suited for applications where high accuracy is required at high speeds and under fluctuating heavy loads, such as the drive mechanisms for automobiles, machine tools, and highpressure pumps.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Machined Type Needle Roller Bearings are bearings with a low cross sectional height and large load ratings. The outer ring has stable, high rigidity and can be used even for light alloy housings. These bearings are available in metric series and inch series, both of which include a caged type and full complement type. They are suitable for a wide range of conditions including heavy load with either highspeed or lowspeed rotation. In addition, bearings are available with or without an inner ring. The type without an inner ring uses a shaft as the raceway surface, making the design compact.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Shell Type Needle Roller Bearings are lightweight bearings with large load ratings. They employ a shell type outer ring made from a thin specialsteel plate which is accurately drawn, carburized and quenched, thus providing the lowest sectional height among the Needle Roller Bearings. There are two types of bearings available in this series; the caged type and the full complement type. The appropriate type can be selected according to the operating conditions. The caged type has a structure in which the needle rollers are accurately guided by the cage and thrust rings. It is useful for applications at highspeed rotation. The full complement type needle roller bearing, on the other hand, is suitable for heavyload applications at lowspeed rotation. Since these bearings are pressfitted into the housing, no axial positioning fixtures are required. They are ideal for use in massproduced articles that require economy, and have a wide variety of applications.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Needle Roller Cages for Engine Connecting Rods are bearings for use in engine connecting rods. These bearings have superior performance proven in high performance engines of racing motor cycles, and are widely used in small motor vehicles, motor cycles, outboard marines, snow mobiles, highspeed compressors, etc. and also in generalpurpose engines. Bearings for engine connecting rods are used under extremely severe and complex operating conditions such as heavy shock loads, high speeds, high temperatures and stringent lubrication. Needle Roller Cages for Engine Connecting Rods are lightweight, and have high load ratings and high rigidity as well as superior wear resistance to withstand severe conditions.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
Since the stud is eccentric, it can be aligned by rotation, and can be easily adjusted so that the load distribution on the outer surface of the outer ring is uniform. These are eccentric cam followers with a onepiece stud that can be mounted in the same mounting holes as those for Standard Type Cam Followers. The eccentricity is 0.25 mm to 0.6 mm.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
The IKO Super Flexible Nozzle is a compact nozzle used on machine tools to supply and spray cutting oil exactly at a specified location. Since the angle of the nozzle can be easily changed, the oil supply can be concentrated on the working area, and cooling and lubrication can be performed effectively. As a result, cutting resistance is reduced and superior finish is obtained, achieving high machining accuracy. The tool life can also be extended, which can result in cost savings. The Super Flexible Nozzle can be used at the spindle end of machining centers and at the tool holder of an NC lathe.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Nano Linear is a moving magnet type linear motor table with a magnet and optical linear encoder scale in the steel moving table part, and a stator coil and an optical linear encoder head in the steel bed. For the table guiding parts, an IKO Crossed Roller Way, wellestablished in the area of miniature linear motion rolling guides, is used in combination with a linear motor and highresolution linear encoder to realize highly accurate positioning. Thanks to adoption of a highperformance neodymium magnet, large thrust force can be acquired and therefore highspeed and highly responsive positioning is possible, despite the very small body. In addition, high cleanliness is realized as the mechanical contact part is only the linear motion rolling guide thanks to adoption of a landmark driving method without cables. Nano Linear is an optimal compact positioning mechanism for semiconductor and LCD manufacturing machines, as well as testing and inspection equipment and electronic
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Nano Linear NT is a moving magnet type linear motor table with a magnet and optical linear encoder scale in the steel moving table part, and a stator coil and optical linear encoder head in the steel bed. For the table guiding parts, an IKO Linear Way, wellestablished in the area of miniature linear motion rolling guides, is used in combination with a linear motor and highresolution linear encoder to realize highly accurate positioning. Thanks to the adoption of highperformance neodymium magnet, large thrust force can be acquired and therefore highspeed and highly responsive positioning is possible, despite its very small body. In addition, high cleanliness is realized as the mechanical contact part is only the linear motion rolling guide thanks to adoption of a landmark driving method without cables. Nano Linear NT is an optimal compact positioning mechanism for semiconductor and LCD manufacturing machines, as well as testing and inspection equipment
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
The IKO Linear Motor Table LT is a compact and highprecision positioning table made of aluminum alloy, with an optical linear encoder built in and an AC linear servomotor incorporated between moving table and bed. Three series (Compact Series LT···CE, Long Stroke Series LT···LD and High Thrust Series LT···H) are available and can be selected according to the application. The lightweight moving table and large thrust force of Linear Motor Table LT enables operation with high acceleration/deceleration and high response. Further, the advanced servo technology achieves high static stability and speed stability. Linear Motor Table LT is ideal for applications such as semiconductors and liquid crystal related equipment, measuring instruments, assemblers and conveying machines that require highspeed work.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
Precision Positioning Table LB is a highspeed movementenabled, long stroke positioning table that adopts a highly durable and hightensile timing belt containing steel cord incorporated into the feeding mechanism of the slide table, and uses a high torque 5phase stepper motor as the driving motor. The slide table and bed are made of lightweight highstrength aluminum alloy. Two sets of IKO Linear Way are incorporated into the linear motion rolling guide in parallel, realizing stable and high running performance. Precision Positioning Table LB is ideal as a positioning mechanism, for assemblers, conveying machines or pallet changers that work at high speed.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
CLube Linear Way ML is a small LSeries linear motion rolling guide with builtin CLube lubrication that provides longterm, maintenancefree operation. Our CLube technology maintains the lubrication performance for an extended period of time, reducing lubrication schedules and the time it takes to manage them.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
CLube Linear Way ME is an ESeries linear motion rolling guide with builtin CLube lubrication that provides longterm, maintenancefree operation. Our CLube technology maintains the lubrication performance for an extended period of time, reducing lubrication schedules and the time it takes to manage them.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
Interchange specifications are available. Since the slide unit and track rail dimensions are separate, each can be individually added or exchanged. Lower, narrower, shorter...more compact in every aspect. Flange Type and Block Type Slide units include two flange types with different mounting directions and three narrow block types. Length of Slide Unit Available types include a short type, with the same crosssection as the standard type, and a highrigidity long type. Stainless Steel Stainless steel types, with excellent corrosion resistance, are also available. They are ideal for use in clean rooms for medical equipment, various disc readers and semiconductor manufacturing devices.
Request for a quoteResults for
Bearings for rollers - Import exportNumber of results
81 ProductsCountries
Company type