Air pumps - Import export

Graco diaphragm pump HUSKY 3300A A01 A A2 SP SP SP BN The Husky 3300 Air Operated Diaphragm Pump features a fail-safe low pulsation air valve for a smooth and fast transition. The one-piece center section eliminates leakage and reduces maintenance required on Husky pumps compared to other diaphragm pumps. Overall efficiency improvement (up to 40% more efficient) Highest fluid flow rate in its class The diaphragms last up to 5 times longer than other air-operated diaphragm pumps Extensive range of materials for all applications Offered in ATEX configuration. Extensive range of materials for many applications Flow rates up to 300 gpm (1,135 lpm) Modular air valve that does not jam Complete 3-inch family of diaphragm pumps available with aluminum or polypropylene center sections Heavy duty construction Chemical Compatibility Guide Connection 3". Maximum flow 1135 l/min Type number 652124

The Stainless Steel Husky 716 Air Operated Diaphragm Pump has an external controller for remote control. Middle and end ports No mechanical seals that cause fluid leakage or failure Silent operation of less than 85 dBa, including the option of mounting an easy-to-use external muffler for even less noise Easy-to-maintain air valve and ball check valves Center and end ports of 19.05 mm (3/4 inch) No seals to leak Silent operation of less than 85 dBa, including the option of mounting an easy-to-use external muffler for even less noise Easy-to-maintain air valve and ball check valves

10,000 PSI (700 BAR) INFINITY SERIES (ISP) AIR PUMP The SPX FLOW PA60A is an Infinity Stage Air Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Light weight and portable: 77 lb (34.9 kg) [without oil] PA60APF5FP Light weight and portable: 88 lb (40.1 kg) [without oil] PA60APF5FMPR Removable control pendant (25 ft / 7.6 m) Removable 4" (100 mm), calibration-capable gauge CE ATEX Ex II 2 GDc T4 4 port manifold available to power up to 4 tools from a single pump (not for lifting applications) Fewer parts for lower service cost Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The original air pump! Features a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PA55 base pump Retract side internal relief valve protects tool 4-way 2-position air pilot valve standard Use with single or double acting tools. Not for lifting applications. Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The RWP55-BS has been the market leading pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Powerful 3 hp motor starts under load Retract side internal relief valve protects tool Use with single or double acting tools. Not for lifting applications 4" calibration capable gauge Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Has a retract port pressure selector 10,000 psi (1,500) CAUTION: This system should not be used for lifting applications.

Every Slim is delivered with our BRM quality checklist and includes all the components needed to get started with the machine: A water chiller, air pump, red pointer, non-filtering fume extractor, honeycomb table, LightBurn software, maintenance set, our manual and one lens.

Every Slim is delivered with our BRM quality checklist and includes all the components needed to get started with the machine: A water chiller, air pump, red pointer, non-filtering fume extractor, honeycomb table, LightBurn software, maintenance set, our manual and one lens.

Every Slim is delivered with our BRM quality checklist and includes all the components needed to get started with the machine: A water chiller, air pump, red pointer, non-filtering fume extractor, honeycomb table, LightBurn software, maintenance set, our manual and one lens.

Every Slim is delivered with our BRM quality checklist and includes all the components needed to get started with the machine: A water chiller, air pump, red pointer, non-filtering fume extractor, honeycomb table, LightBurn software, maintenance set, our manual and one lens.

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Application General purpose, gas venting, air seeder and marine bilge pump applications. Inner diameter 51 mm according to AS 1425/2.22. Inner diameter 51 mm according to AS 1425/2.22.