Multiturn encoders - Import export

Absolute encoders MEM-BUS EtherCAT comply with Profile CANopen over EtherCAT (CoE), Cia DS-406. They avail on EtherCAT conformance certification and are UL Listed for the canadian and US market. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. Reduced cabling and easy configuration – each slave is addressed automatically – simplify the installing operations. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments.

The absolute encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard. The encoders comply with standards CIA DS301, DS406, DS 305, featuring the functions of Class 2. They are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). The encoder operating parameters are set directly by the user: revolutions no., steps per rev., rotation direction and preset no. The diagnostic function signals possible parameter, position or temperature errors as well as the battery alarm – the data memory is anyway ensured for a long period (30 years). The baud rate and node selection can be easily set by LSS protocol or by means of dip-switches. MEM40-Bus encoders avail on 3 signalling LEDs for supply state, line and error. The encoder comes with metal housing, round flange, solid or hollow shaft. The electrical connection is by M12 connector. The encoders are UL listed for Canada and USA markets.

The encoders series MEM can be supplied in single or in multiturn version, with high resolution values: up to 13 bits info/revolution (corresponding to 8192 info/rev.) x 15 bits rev. (corresponding to 32768 rev.), in binary or Gray code. The multiturn encoders provide the SSI serial output signal, while the singleturn type offer two output options: SSI or push pull parallel signal. Several mechanical versions are available to satisfy all application requirements: round flange, square flange, hollow shaft, with different options for the shaft diameter and connection position and type.

Elap absolute encoders series MEM-Bus comply with the Encoder Profile Specifications V4.1 version 3.162 related to Profidrives. They fulfil the requirements of the Application Classes 3 and 4,that is they provide all functions for scaling factor, preset, rotational direction, positioning and speed values, diagnostic. MEM-Bus encoders support the RT Real Time and IRT Isochronous Real Time transmission mode, thus ensuring fast, accurate and safe data transfer. Besides standard telegrams 81, 82, 83, 84 Elap encoders support the user telegram 860, featuring Profibus telegram, a peculiarity which simplifies the encoder handling, as well as the possible migration from Profinet devices. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged, with solid or hollow shaft.

The programmable multiturn sensor ETA25PM can be parameterized by the customer on site to the desired angular measuring range and sense of rotation up to 10,000 times. Only one device for different angles of rotation, sense of rotations direct parametrizable on site. These advantages enable the user the possibilities to set up the ETA25PM multiturn encoder to the requirements of the application on site. Only one angle encoder device for different requirements is needed, which can be parameterized almost as often as required. The ETA25PM measures angles from 0…10° up to 0…72000° (absolute). The ETA25PM is available until protection class IP66 and has a long durability of more than 100 million shaft revolutions. The compact sensor in the 25 mm housing with Ø6 mm or Ø6.35 mm shaft diameter is e.g. optimally suited for use in drive units as position feedback. A variant of the ETA25PM with integrated buttons for angle programming and sense of rotation is available on request.

Thanks to the True-Power-On function, any angle changes are registered even during a supply voltage interruption and the angle is reproduced exactly as an analogue signal as soon as the supply voltage is restored. The contactless sensor technology works on the basis of modern gradient-based magnetic field evaluation in processor-supported circuit design. This makes the multiturn encoder largely immune to external magnetic fields or changing ambient temperatures. In combination with the precision mechanics, the encoder shows its additional strength compared to magnetoresistive methods. The latter can have weaknesses in voltage-free measured value acquisition. Another special feature of the multi-turn sensor are the signal plateaus at the beginning and end of the range, which prevent sudden signal changes. The electrically effective rotation range of the encoder is 3600°, ex works.

Optical multiturn absolute encoder, solid shaft, with PROFINET IO and ETHERCAT output interface. Absolute multiturn programmable encoder for industrial fieldbus application.

Elap encoders MEM-Bus EtherNet/IP can be easily integrated in any EtherNet/IP net, as they comply with all EtherNet/IP interface requirements, according to directives IEC61784-1. The encoder features the encoder profile 22H according to CIP™ protocol specifications.The encoders are ODVA conformant certified, including CIP Sync certification.MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. MEM-Bus EtherNet/IP are UL certified for the Canadian and United States market.

Wire transducers series WPS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and two availble strokes: 2300 or 5000 mm. The housing is out of glass fiber reinforced nylon, whilst the wire consists of coated poliamide stainless steel.

Wire transducers series WDS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and strokes ranging from 3000 to 15000 mm. The housing is out of aluminium, whilst the wire consists of coated poliamide stainless steel.

Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. To achieve the SIL2 level, the TRK/S3 contains a redundant sensor system and additional internal monitoring mechanisms as well as safe communication via the FSoE (failsave over EtherCAT) protocol. The FSoE protocol is implemented according to the Safety over EtherCAT specification ETG.5100 version 1.2.0.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integrated absolute multiturn gearbox for the acquisition of revolutions - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integrated absolute multiturn gearbox for the acquisition of revolutions - optional potting against water jets (IP 69K) - electrical connections via round plug M12x1 or lead exit.

Recording of the angular position and revolutions by means of Hall sensors - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 and 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. To achieve the SIL2 level, the TRT/S3 contains addtitional internal monitoring mechanisms as well as safe communication via PROFIsafe. The PROFIsafe protocol is implemented according to the PROFIisafe Profile for Safety Technologie version 2.4 (PNO Order No. 3.192)

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit. Note (TMA, TMN): The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ±90° during the interruption of the supply voltage.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via lead exit (with connector for testing). Note: The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCA) with a maximum of four galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with analogue interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The analogue signal and switching outputs can be parameterised separately using multifunction pins (MFP and PRE) in the connector.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCE) with a maximum of four galvanically separated SIL2 switching outputs that can be set by the customer, and which are activated or deactivated depending on the respective position of the drive shaft. A parameterisable multiturn absolute encoder with SSI interface and the switching cam encoder PCB with separate controller are integrated in the compact housing. The SSI interface can be preset, the encoding direction is adjustable and the switching outputs can be preset. A special shaft design appropriate to the play-compensating measurement gear ZRS is available. The supply voltage, SSI signal and switching contacts are each galvanically separated from one another.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCE) with a maximum of four galvanically separated switching outputs, which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with SSI interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The SSI interface can be preset, the code direction can be set and the switching outputs can be preset.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCI) with a maximum of four galvanically separated1) SIL2 switching outputs that can be set by the customer, and which are activated or deactivated depending on the respective position of the drive shaft. A parameterisable multiturn absolute encoder with incremental interface as well as the four switching outputs are integrated in the compact housing. The switching outputs can be preset. A special shaft design appropriate to the play-compensating measurement gear ZRS is available. The supply voltage, incremental signal and switching contacts are each galvanically separated from one another

HTx36 encoder - robust, ball bearing, sealed, with solid or hollow shaft. The encoders of the HTx36 series are specially designed for use between simple applications and heavy-duty applications. The contactless encoders in the Ø36 mm metal housing can be precisely matched to the respective area of ​​application thanks to their numerous electronic and mechanical options. Absolute encoder: — Single- or multiturn — Analogue: Voltage/current output, PWM - 12 bit — Digital: SSI, SSI+UVW up to 16 pole pairs, SER, SPI - up to 14 bit — Also redundant Incremental encoder: — A, B, Z also differential A, A/, B, B/, Z, Z/ — OC, TTL, PP signal outputs — Free selection of the number of pulses - up to 1024 ppr. — UVW signals for motor commutation of DC motors up to 16 pole pairs

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Positioning drive with through hollow shaft • Batteryfree multiturn absolute encoder • Aluminium housing • Optionally with cULus component recognition

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Positioning drive suitable for a wide range of applications in various industrial areas • Batteryfree multiturn absolute encoder • High dynamics • Optional use with the SeGMoBox or as a standalone device • Optionally with cULus component recognition

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Intelligent connection box in modular design • Two housing variants with 4/9 slots available • Module combination for control of up to 17 axes • Conveniently configurable via SeGMoSupport Tool

ETx25K kit encoders are used for reliable angle measurement from a shaft which is installed in the application: as single turn variant (360°) with analogue, PWM, incremental, SER or SPI output, or as a multiturn variant (up to 72000°) with analogue output. ETx25K can be used up to medium environmental requirements (IP67). Singleturn electronics: ETA25K absolute analogue encoder (ETA25K X redundant version): Provides an absolute analogue signal with 12 bits resolution. ETP25K absolute analogue encoder: Pulswidth output (PWM) ETI25K incremental encoder: With up to 1024 pulses / per revolution and availability of following output signals: TTL, Push-Pull or Open Collector. ETS25K absolute encoder with digital output: 12 bits resolution with SER interface and in 14 bits resolution with SPI interface Multiturn electronics: ETP25K PM multiturn encoder with analogue output, direct programmable on site: The ETA25K PM measures angles from 0…10° up to 0...72000° (absolute).

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Interface for controlling up to 5 positioning drives • Integrated power management • Straightforward commissioning of the SeGMoPositioning • Depending on the design either with cULus component recognition or cULus listing • Support Tool for advanced commissioning and configuration

ETx25F encoders are used for reliable angle measurement with a hardened and tempered sleeve bearing made of metal: as singleturn variant (360°) with analogue, PWM, incremental, SER or SPI output or as multiturn variant (up to 72000°) with analogue output. ETx25F can be used up to medium environmental requirements (from shaft side max. IP55M/IP66S). Singleturn electronics: ETA25F absolute encoder (ETA25F X redundant version): Provides an absolute analogue signal with 12 bit resolution. ETP25F absolute analogue encoder: PWM output. ETI25F incremental encoder: With up to 1024 pulses / per revolution and availability of following output signals: TTL, Push-Pull or Open Collector. ETS25F absolute encoder with digital output: 12 bits resolution with SER interface and in 14 bits resolution with SPI interface. Multiturn electronics: ETP25F PM multiturn encoder with analogue output, direct programmable on site: The ETA25F PM measures angles from 0…10° up to 0...72000° (absolute).

The ETx25 singleturn Hall effect encoder family is characterized by its high durability with over 100 million shaft revolutions and independent linearity up to +/- 0.3%. The rotary encoders measure angles contactless with a hardened and tempered sleeve bearing made of metal. The sensor technology offers a 10 times longer lifetime expectancy than conventional potentiometers. The sensor in the Ø25 mm housing with Ø6 mm or 6.35 mm (1/4 ") shaft diameter is fixed in the application by means of a central thread. It can be chosen between following electronics: Absolute encoder: — Single- or multiturn — Analogue: Voltage/current output, PWM - 12 bit — Digital: SSI, SSI+UVW up to 16 pole pairs, SER, SPI - up to 14 bit — Also redundant Incremental encoder: — A, B, Z also differential A, A/, B, B/, Z, Z/ — OC, TTL, PP signal outputs — Free selection of the number of pulses - up to 1024 ppr. — UVW signals for motor commutation of DC motors up to 16 pole pairs