Multi construction - Import export

Optigrun Drainage and Storage Board FKD 25 for use on extensive green roofs with single- or multi-layer construction and under path surfaces (can be walked on).On flat roofs up to 5 % roof pitch In a triple-layer structure with filter fleece FIL 105 and extensive multi-layer substrate E Under thin-layer pedestrian pathways in gravel beds without bedding material The large naps can face either downwards or upwards Suitable for non-pitched roofs Suitable for use on inverted roofs With water reservoir

Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

AViTEQ Dewatering screens are designed as linear vibrating devises for drainage of sand, plastic granules, kieserite, limestone, etc., even to depart insoluble contaminants from wash water or carrier liquids. Advantages & benefits double, specific screening performance of linear vibration with respect to flat screening easy replacement of screen decks low height Construction The design of the screen, depending on the requirements, in single or multi-deck construction. Possible drives are magnetic vibrators, unbalanced motors, exciters and circular vibrators. Dewatering screens are generally designed with top-mounted drives. Selection The sizing depends on: the material to be drained properties of the bulk material, such as bulk density, grain shape, size, size distinction Key figures The dimensions are determined by the task. Previously executed dimensions: length: up to 5,000 mm width: up to 2,800 mm throughput: up to 200 m³/h drives: magnetic vibrator, unbalanced motor, exci

Our Prefabricated modular restrooms, toilet, shower, and sanitary facilities are a fast and affordable way to get the temporary and permanent restroom facilities you need. Prefabex prefab modular restrooms can be easily added to your existing facilities, or can be create placed as a standalone restroom and toilet building. Modular restroom buildings can be easily added to your existing facilities, or can be placed as a standalone toilet building. Prefabex offer wide range of sizes and designs of modular restroom units and shower buildings that suit your need Whether it is for both males and females, includes showers, change rooms and compliant disabled accessibility you can find a solution within our extensive range of products. Our modular restroom construction is a cost-effective alternative to traditional construction. WC Multi-person, and individual facilities are available.

Multi-wall polycarbonate sheets are made of strong yet lightweight thermoplastic synthetic resin that provides a durable, translucent solution for applications where impact resistance and light transmission are key. These features plus its distinctive interior structure and light-transmitting properties make multi-wall polycarbonate perfect for unique architectural designs and glazing applications, as well as conventional construction uses. Multi-wall polycarbonate sheets come with UV protection and a 10 year warranty. Features 12 colors in stock 5 structure options UV protection Cut to size 10 year warranty Available to ship in 3 to 4 business days Benefits Highly impact resistant Energy efficient High light transmission Lightweight Easy to install Recyclable Buyback Program Applications Architecture Construction Roofing Glazing Greenhouses Skylights

To build a continuous supply steam supply system of 24 hours to reduce the existing energy cost in power generation, is a business-friendly environment to meet the low-carbon green growth national policy Product Specification 100Kw~3,000KW/H Product Use Used for waste incineration power generation system and wood pellet (coal) power generation system Our Company Changhwaenergy co.,ltd. The technology of CHANGHWA ENERGY is developed with utmost effort to create eco-friendly technology for the times of low-carbon era. Our accumulated technology has been a source of new leaps and we have achieved higher customer satisfaction than ever before. As a result of excellent technology development and research, we have developed and manufactured eco-friendly multi-tube electric boiler and constructed the production system.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

Suspending Ceilings An exposed white metal lay in ceiling grid supporting a drop in mineral fibre board tile. These are normally fire rated to underside of mezzanine. Column Cases Used to fire rate the columns of the mezzanine a one hour column case is constructed of 20mm Promalit or equivalent. Supplied in galvanised, white polyester or PVC, powder coated to match décor. Fascia One hour fire rated fascia constructed from ‘Glasroc’ multi-board. Fitted to all exposed edges of the mezzanine.

Our modern PVC balcony door follows the latest trends with its square design, providing an aesthetic appeal to any building. It offers favorable cost-effectiveness, perfectly satisfying contemporary market demands. Our product features innovative PVC frames and a profile system adaptable to various building situations. The multi-chamber construction ensures high levels of soundproofing, security, and thermal insulation.

MULTI TIER MODULAR SHELVING SYSTEMS Multi tier Modular Shelving Systems offer frame system configurations for flexible bay-size adjustment. The extreme versatility of this system makes it suitable for virtually any storage or warehouse application. Pre-assembled support frames made from high-quality, galvanized steel are available in various heights for single-level and multi tier constructions. They are designed for fast assembly onsite, braced with either diagonal or horizontal cross beams. The system offers complete flexibility with either shelves or cross beams being adjustable on 53 mm pitch, the height of the mezzanine floor can be set to suit individual requirements, to incorporate sprinklers, air-conditioning, lighting and offices etc

Temperature- and density volume conversation for liquids and gases. The UR06 is used to collect energy and material flows for gaseous, vaporous and liquid media. It can be connected to different types of volume, mass, flow, pressure, temperature and densitymeter. From the measured values ??and the parameters set by accepted rules of technology, the media properties are formed. For further processing of the measured and calculated values ??can be passed through variably configurable standard interfaces. Application • continuous measurements of pipeline liquids (mineral oil / Liquid gas) and gas • fuel consumption measurements of motors with supply and return acquisition including the temperatures • measurement of mineral oils used for accounting purposes • measurement in multi-product operation Characteristics • modular construction • Ethernet integrated • MBus and Modbus • simple operation • substantial data logger function • 24 Bit AD-converter • 2 metering points • short cycle...

With today’s consumers becoming ever more eco-conscious and focused on recycling, beauty packaging made from a single material family is an increasingly favourable option. The multi-material construction of many traditional beauty containers can prove an obstacle to recycling; especially when disassembling the pack by hand is impractical for consumers. Manufactured in HCP Germany and composed entirely of the PP/PE material family, HCP’s stock ‘14mm Jumbo Cylindrical Tall Mascara’ is a mono-material packaging solution that is ready for single-stream recycling. For an extra boost, the ‘UNO’ collection also incorporates recycled materials. The fibre and moulded mascara brushes are manufactured in bio-based materials for a planet-friendly application solution.

The storage of car parts requires both solutions to accommodate bulky goods and the ability to store sensitive goods (such as already painted body parts) without damage. Whether it is packed goods, body parts, tyres or rims - with installation kits from SCHULTE Lagertechnik everything is in perfect hands. — tyre-protecting storage through optimised tyre cross beams or storage on rounded wide span spars — Racks for small, medium and large parts storage — all car racks have the 25 mm grid perforation — Can be combined with the entire connector system — various accessories — special car shelf sets — Construction of multi-storey racking systems possible — individual adaptation to different wheel, tyre and rim sizes — quick assembly by simply plugging in the levels — tyre-protecting storage of the wheels through specially shaped cross beams — optimised height 2,750 mm for the storage of SUV wheels — variably applicable for wheels with 550 - 750 mm Ø

Plug-in shelving is ideal for placing and removing items by hand. Thanks to its plug-in connection, the shelves are quick and easy to assemble and also offer a higher maximum load capacity than shelves with a bolted connection. They can be installed for single and double shelving as well as for multi-storey shelving systems and have a special system perforation that makes changing accessories easy. — Bracing with cross brace — Simple alignment of the shelf through turnbuckles on the cross braces — Ideal for constructing rows of shelving in front of walls and as back-to-back double shelving — Height of shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with three shelf widths — Suitable for constructing multi-level shelving systems — Faster assembly thanks to simple plug-in system for shelves — Economically priced bracing variations — Possible to increase the bay load through additional side elements

For more than 25 years our name has stood for experience, professional competence and consumer-orientated service. Moreover, our clients hold the opinion that our skills in producing multi-part press tools and fixture constructions are absolutely convincing. These tools are implied for instance within the framework of electronic and automotive industry in favour of processing different materials. Thus, your needs will be developed gradually. By using up-to-date software we produce high standard multi-part press tools for national and international clients. With the professional help of the CAD/CAM-Software (Cimatron) we generate 3D-construcions and solids. For data migration we offer several interfaces: Step – DWG – IGES – DXF – just choose what you need. Immediate interfaces that lead directly from the CAD-workstation to the machine ensure shortest processing times.

Thickness: 0,030 - 0,200 μm Width: 1.000 - 6.000 mm Standard roll length: 25 / 50 m Quality: recycled material Standard colours: natur – honey colour / coloured – translucent / black / black opaque Most commonly used sizes: 2 x 50 m / 4 x 50 m / 6 x 50 m ALL OUR FILMS ARE MADE-TO-MEASURE  PLEASE ALWAYS CHECK THE PRODUCTION POSSIBILITIES WITH US AND WE WILL FIND THE BEST SOLUTION FOR YOUR BUSINESS.