Moulded foams - Import export

Our patented material is highly suitable to produce foam moulds and RTM pressure injection moulds. Advantages: • Large volumes of more than 2500 kg can be cast in less than 45 min. • Good castability • Hardly measurable linear shrinkage • High temperature resistance • Demoulding process after approx. 90 min. (after adding the last backfilling compound) • Chemical adhesion to polyester or vinylester gelcoat • Immediately after the first mould half has cooled down, the second mould half can be prepared • Copper pipes keep the mould surface on a nearly constant temperature • Post-curing is not necessary ALWA MOULD D backfilling compounds are the fastest system on the market. For the surface you can chose between two gelcoats: 1) ALWA MOULD COAT This is a vinylester gelcoat that is especially suitable for high-end surfaces. It can be polished to high-gloss. 2) ALWA EPF 10 This is an epoxy gelcoat that is easy-to-use and is recommended for parts, where high-gloss surfaces are not needed

CONSTAB offers you a wide range of masterbatches and compounds for polyethylene films, such as: — Bubble Film — Electronic packaging film — Injection molding and extrusion blow molding — Foamed films — Food packaging films — Greenhouse films — Film packaging for industry and food — Industrial films — Industrial packaging films Our masterbatches and compounds provide your products with the properties they should later have.

ALWA EPF 10 is a temperature-resistant, steel-filled gelcoat based on epoxy resin. It is used to produce temperature and abrasion resistant surfaces for vacuum, PU foam, thermionic moulds and heating plates, among others.

Using thermoforming as an alternative to metal, foam or injection moulding often makes economical sense, especially where mid-size production runs or complex components are involved.

ORBIS Europe offers large collapsible bulk containers for rugged industrial and automotive applications. With an extended length, collapsible design, the XXLPak is designed to handle, heavy, long and hard-to-fit parts. It optimises space utilisation at the same time. Our extra-long bulk containers are available with wide access doors and manufactured from high-density polyethylene using a structural foam-molding process for increased durability. Multiple footprints, heights, door configurations and labelling options are available in order to adapt our large bulk containers to customer’s supply chain needs. The extended length containers are designed according to American footprints and multiples of the European standard footprints. - For bulky, hard-to-fit parts - Durable, all-plastic design - Safe handling - Foldable and stackable - Ideal size for logistics and automated systems - Multiple heights and access door configurations

Alfa Plus 3300 is a gum based fountain solution additive for use in all type of offset presses. it is formulated to give the ultimate performance in desensitisation, holding open fine screens and hairline reversals tike no other fount. PROPERTIES Can be used successfully with all types of inks and all types of metal plates. Contains powerful wetting agents which enable it to run with less water. Reduces IPA comsumption Contains agents which speed ink drying and reduce blanket tackiness. Start-ups, prints sharper half-tones and reversals, gives denser solids and reduces paper waste. lnclude Special agents that help to prevent metal corrosion, mould growth and foaming.. APPLICATION Recommended starting dosages: add 2•3 % to 1 litre of water The optimum dosage will vary with the type of press dampening system, water and work being printed and can only be arrived at after some experimentation and experience.

In our wide range of polyurethane foam mouldings you will find head rests, arm and hand rests, leg and foot rests as well as abduction wedges, toilet seats and pipe covers for almost all purposes. All our moulded parts are characterised by long durability and low weight and are also suitable for use in humid and hygienic environments. The majority of our PU mouldings are tested for biocompatibility according to ISO 10993-5 and -10 as well as for flame resistance according to EN 1021-1 and -2. In addition, we also offer the appropriate retaining systems for our moulded parts. In addition to our standard range, we also manufacture customised PU mouldings using our many years of know-how in the industry. Do you have any questions about our products or would you like to request a quotation? Simply contact us.

Consisting of systainer® T-Loc V incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 218 x H 322 mm systainer® material: ABS Insulating insert material: EPP moulded foam Consisting of systainer® T-Loc V incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 218 x H 322 mm systainer® material: ABS Insulating insert material: EPP moulded foam

Consisting of systainer® T-Loc III incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 222 x H 123 mm systainer® material: ABS Insulating insert material: EPP moulded foam Consisting of systainer® T-Loc III incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 222 x H 123 mm systainer® material: ABS Insulating insert material: EPP moulded foam

Consisting of systainer® T-Loc IV incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 218 x H 228 mm systainer® material: ABS Insulating insert material: EPP moulded foam Consisting of systainer® T-Loc IV incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 218 x H 228 mm systainer® material: ABS Insulating insert material: EPP moulded foam

Consisting of MINI-systainer® incl. EPP cover insert and 6-compartment deep-drawn tray Interior dimensions of compartment: L 73 x W 67 x D 42 mm Suitable for sorting small components in the MINI-systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS

Consisting of systainer® T-Loc IV incl. EPP spray can insert A notch at the side of the opening allows spray foam cans with spray nozzles to be inserted Height: 130 mm, depth: 110 mm, diameter: 69 mm (Max. 14 spray cans) This insert allows you to securely organise spray cans in your systainer®, keeping them all in one place. systainer® material ABS Spray can insert material: EPP moulded foam with EPP spray can insert Suitable for most common aerosol cans With additional holes for spray-tops

Consisting of systainer® T-Loc IV incl. EPP cartridge insert With additional holes for cartridge tips Height: 130 mm, depth: 109 mm, diameter: 51 mm (Max. 22 cartridges and 15 cartridge tips) Keep cartridges secure and organised in your systainer® and prevent them from getting mixed up. systainer® material: ABS Cartridge insert material: EPP moulded foam With EPP cartridge insert Suitable for most common cartridges With additional holes for cartridge-tops

Consisting of MINI-systainer® incl. cover insert, EPP and universal deep-drawn 8-compartment tray Interior dimensions of compartments: - 6 compartments L 41 x W 41 x D 42 mm - 1 compartment L 88 x W 88 x D 42 mm - 1 compartment L 241 x W 48 x D 42 mm Suitable for sorting small components in the MINI-systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS With lid insert, EPP and universal insert with 8 divisions

Consisting of systainer® T-Loc V incl. EPP cartridge insert With additional holes for cartridge tips Height: 130 mm, depth: 109 mm, diameter: 51 mm (Max. 22 cartridges and 15 cartridge tips) Keep cartridges secure and organised in your systainer® and prevent them from getting mixed up. systainer® material: ABS Cartridge insert material: EPP moulded foam With EPP cartridge insert Suitable for most common cartridges With additional holes for cartridge-tops

Consisting of MINI-systainer® T-Loc I incl. EPP cover insert and 3-compartment deep-drawn tray Interior dimensions of compartment: L 229 x W 42 x D 42 mm Suitable for sorting small components in the systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS With lid insert, EPP and insert with 3 divisions

MINI-systainer® T-Loc III completely fitted with boxes, 3-compartment deep-drawn tray and cover insert. Base tray with multicoloured removable individual boxes This combination of multicoloured boxes and deep-drawn trays offers excellent flexibility for storing small components. Multicoloured boxes and base tray are also available separately Ribbing is integrated into the base tray to ensure the individual multicoloured boxes remain in place with the lid closed. An excellent choice for sorting small components in a systainer®, such as jigsaw blades, drill bits, screws, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: PS plastic Box material: PS plastic

Preformed injected foam mould Velcro strap closing 12oz

The EPSeal 400 series was developed for synthetic wine corks and T-stoppers for spirits. Various grades are available for both extrusion and injection moulding process. The addition of foam masterbatch enables the user to reach individual customer specifications. The optimal slip systems we have developed allow for consumer friendly removal from the bottle mouth. Download EPSeal Product Guide