Results for
FOCQUET
Belgium
"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The swivel motors of the HSE series also fulfill the function of end position damping with or without adjustable swivel angle limitation. This refers to braking, the deceleration of the swivel movement to a standstill. For damping, the cross-section of the bore for the outflowing medium is continuously reduced, thus hydraulically slowing down the moving masses. The end position is reached when the hole is completely closed and the medium can no longer flow out. In order to provide our customers with the right drive for all areas of application, the HSE swivel motor is available in a total of 6 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once it has been reached – even over an unlimited period of time – despite the effect of a load torque. The brake is used solely to hold the load. It should only be noted that large transmission delays in the lines can cause time differences between the switching off of the swivel motor and the application of the released brake caused by spring force. In order to provide our customers with the right drive for all areas of application, the HSB swivel motor is available in a total of 5 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteLEROY SOMER
France
Advantages IP55 fully sealed splash-and dust in an industrial environment. More compact: gains in size and weight. Good resistance.
Request for a quoteIGUS® GMBH
Germany
Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel drylin® E data sheet - Gearbox for stepper motors GEA-60-..._EN.pdf Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel
Request for a quoteIGUS® GMBH
Germany
Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Combination machine for thick and thin: The AMS 533 TWIN skinning machine is particularly suited to processing cuts with thick tendonsand skin, such as pork loin, pork silverside, beef or veal silverside and boiled beef fillet. Advantages Removal of tendons and skin with one machine TWIN transport rollers and specially coordinated blades providethe highest possible yields Ideal cutting width for powerful skinning and tendon removal inlarge and small cuts Effort-saving work table design due to ergonomicmachine assembly Blade guard in cleaning position Gear brake motor with quick stop Product-specific precision adjustment Options: Quick-clamp blade holder for tool-less blade changing Body lever switch Skinning procedure protection Skinning gloves Special tension rollers
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The completely equipped electrical cylinder unit includes the motor transmission unit, along with the motor brake, two-channel Hall-IC sensor and two end-limit switches. All connection lines run directly out of the unit to make configuration and initial start-up easier, particularly for PLC operation. The fixation of the electric cylinder connections is compatible with commercial pneumatic and hydraulic cylinders.
Request for a quoteDEMAG CRANES & COMPONENTS GMBH
Germany
Our motors perform a wide variety of industrial drive tasks. Reliably and effectively. For example, our type Z cylindrical-rotor brake motors – also as brake motors – offer high drive efficiency – also in continuous duty. They are specially designed to match our gearbox range and provide for simple project engineering. Our conical-rotor brake motors with outputs of up to 55 kW are used for stopping-and-starting drives or for direct line-fed travel applications. Thanks to their unique brake principle, they are the first choice wherever demanding requirements have to be met by the brake.
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option
Request for a quoteGSW SCHWABE AG
Germany
Strong plasmaburned back plate provides smooth and straight operation Removable and adjustable hub disk Fast and precise expansion via bevel gear with exceptionally wide ranges, allows clamping of all internationally common coil sizes From 1000 kg capacity equipped with lever type expansion Alternatively with guide rod coil fixation instead of expansion system (mainly for pallets) Pneumatic hold down arm Motorized pivoting Electropneumatic brake system Larger mandrel segments Traveling feature Different loading heights Various expansion ranges Different back plate sizes Loop control systems
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Powerful derinding machine for large and small pieces of cheese. In addition to an ideal cutting width, the Weber Cheese Skinner offers product-specific height adjustment of the blade, meaning that natural and plastic rinds can be optimally removed. Maximum product yield is guaranteed. Advantages Powerful and with a compact footprint A special cheese transport roller and perfectly adjusted blades for optimal processing results Ideal cutting width for powerful derinding of large and small pieces of cheese Bolted blade with blade protection in cleaning position Unique geared brake motor with quick stop Options: special voltages
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
One for many purposes: Powerful skinning machine for large and small cuts of beef, veal, pork, turkey, horse and game. The Skinner AMS 533 offers an ideal cutting width for processing large cuts, such as beef topside. Advantages Powerful for the highest yield from the smallest installation area Product-specific optional transport rollers and speciallycoordinated blades provide the highest possible yield Ideal cutting width for powerful skinning of large and small cuts Blade guard in cleaning position Gear brake motor with quick stop Product-specific tension rollers Newly-developed compressed air transport roller cleaning,resulting in consistent skinning results Options: Body lever switch Quick release lock for tool-free blade changes Special rollers Skinning procedure protection Special tension rollers
Request for a quoteAPD MAQMASTER
Spain
The GP350RT miter saw is equipped with a rotating head and a self-braking motor; Cutting capacity at 90° for profiles up to 160×110 mm and 115×115 if it is at 45°; All movements occur on bearings to guarantee smoothness, rigidity and precision; Equipped with blade protection with bearing, double shock absorber that allows the blade holder head to be lowered without any effort.
Request for a quoteAPD MAQMASTER
Spain
400mm diameter cutting disc included. Table rotation from -22.5º to +157.5º. 3HP (2.2kW) auto brake motor. 2x Vertical footrests. 2x horizontal grippers. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Moveable turret to increase cutting capacity. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. Polycarbonate security screen. OPTIONS Digital degree display using linear encoder. LUBETOOLS microspray. Screen with automatic opening/closing. LaserLine. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS 900 x 1000 x 1480 mm (380 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
600 mm diameter cutting disc included. Table rotation from -22.5º to +157.5º. 4HP (3 kW) auto brake motor. 2x Vertical footrests. 2x Horizontal hold-downs. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Moveable turret to increase cutting capacity. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. Polycarbonate security screen. OPTIONS 5.3HP (4 kW) motor. 7.3HP (5.5 kW) motor. Digital degree display using linear encoder. LUBETOOLS microspray. Screen with automatic opening/closing. LaserLine. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS 1300 x 1220 x 1635 mm (500 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
650 mm diameter cutting disc included. Table rotation from -22.5º to +157.5º. 5.5 HP (4.1 kW) motor with auto brake. 2x Vertical footrests. 2x Horizontal hold-downs. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Moveable turret to increase cutting capacity. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. Polycarbonate security screen. OPTIONS Digital degree display using linear encoder. LUBETOOLS microspray. Screen with automatic opening/closing. LaserLine. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS Standard wooden cage packaging.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
APD MAQMASTER
Spain
600 mm diameter cutting disc included 90º cut. 5.5 HP (4.1 KW) motor with auto brake. 2x Vertical footrests. 2x horizontal grippers. 2x rear suction outlets diam. 120mm. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Moveable turret to increase cutting capacity. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. Polycarbonate security screen. OPTIONS Digital degree display using linear encoder. LUBETOOLS microspray. Screen with automatic opening/closing. Laser Line. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS 820 x 1300 x 1660 (450 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
650 mm diameter cutting disc included 90º cut. 7.5HP (5.6 kW) motor with auto brake. 2x Vertical footrests. 2x horizontal grippers. 2x rear suction outlets diam. 120mm. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Moveable turret to increase cutting capacity. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. Polycarbonate security screen. OPTIONS 10HP (7.5 kW) motor. LUBETOOLS microspray. Screen with automatic opening/closing. LaserLine. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS 820 x 1400 x 1660 (450 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
700 mm diameter cutting disc included 90º cut. 7.5 HP (5.6kW) motor with auto brake. 2x Vertical footrests. 2x Horizontal hold-downs. 2x rear suction outlets diam. 120mm. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. polycarbonate security screen. OPTIONS 10HP (7.5 Kw) engine. LUBETOOLS microspray. Screen with automatic opening/closing. LaserLine. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS 1300 x 1220 x 1700 (550 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
800 mm diameter cutting disc included 90º cut. 10 HP (7.5 kW) motor with auto brake. 2x Vertical footrests. 2x Horizontal hold-downs. 2x rear suction outlets diam. 120mm. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Adjustable cutting speed. Polycarbonate security screen. LUBETOOLS microspray. Screen with automatic opening/closing. Speed Variator. OPTIONS LaserLine. Automatic connection with vacuum cleaner. LED lighting. PACKAGING AND DIMENSIONS Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
800 mm diameter cutting disc included. Table rotation from -22.5º to +157.5º. 10 HP (7.5 kW) motor with auto brake. 2x Vertical hold-downs. 2x Horizontal hold-downs. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Adjustable cutting speed. LUBETOOLS microspray pneumatic lubrication system. Digital degree display using linear encoder. Screen with automatic opening/closing. Polycarbonate security screen. OPTIONS LaserLine. Automatic connection with vacuum cleaner. PACKAGING AND DIMENSIONS 1500 x 1550 x 1935 (980 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
500 mm diameter cutting disc included. Table rotation from -22.5º to +157.5º. 4HP (3 kW) auto brake motor. 2x Vertical footrests. 2x Horizontal hold-downs. Bimanual control to activate the disc rise. Double pressure safety system of pushers. Moveable turret to increase cutting capacity. Adjustable cutting speed. Pneumatic lubrication system using a sprayer. Polycarbonate security screen. OPTIONS 4Kw (5.5HP) engine. Digital degree display using linear encoder. LUBETOOLS microspray. Screen with automatic opening/closing. Laser Line. Automatic connection with vacuum cleaner. LED lighting. Speed Variator. PACKAGING AND DIMENSIONS 1200 x 1100 x 1500 mm (430 Kg). Standard wooden cage packaging.
Request for a quoteZORLU DEGIRMEN MAKINALARI LTD. STI.
Turkey
The bucket elevator is used for the vertical transportation of grains and powdered materials. This transportation is realized by the means of a belt with buckets. The bucket elevator consists of the top part, bottom part and elevator pipes. It is driven by a directly connected gear motor equipped with an electromagnetic brake. In case of a power failure or any breakdowns, the electromagnetic brake prevents the bucket elevator from rotating backwards and therefore damaging itself or the buckets. At the bottom cover, there is a pulley without drive and a tensioning mechanism. The speed guard installed at the bottom pulley informs the operator when the belt brakes.
Request for a quoteBERTAZZON 3B SRL
Italy
The Galleon Race ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail, connected to a central rotor by radial arms (sweeps). The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. The ride moves by means of 1 self-braking A.C. gear-motor fixed to the central rotor and controlled by Frequency Drive.
Request for a quoteBERTAZZON 3B SRL
Italy
The Matterhorn ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail, connected to a central rotor by radial arms (sweeps). The cars swings due to centrifugal force during rotation of the ride. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The ride moves by means of one self-braking A.C. gear-motors fixed to the central rotor and controlled by Frequency Drive.
Request for a quoteBERTAZZON 3B SRL
Italy
The Matterhorn ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body square structure supporting the central rotor and housing all electric and pneumatic equipments. The whole structure is hot-dip galvanised, with exception of the central rotor and radial arms. The foot-boards approaching the cars consists of anti-skid aluminium tread plate. Enclosure fences are positioned along the outer perimeter of the footboards (stainless-steel). Electronically operated lighting is composed of cabochons. Sixteen cars run along the rail, connected to a central rotor by radial arms (sweeps). The cars swings due to centrifugal force during rotation, and are stabilized by a pneumatic operated brake during loading and unloading. The ride moves by means of one self-braking A.C. gear-motor controlled by Frequency Drive.
Request for a quoteBERTAZZON 3B SRL
Italy
The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.
Request for a quoteBERTAZZON 3B SRL
Italy
The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.
Request for a quoteResults for
Motor brakes - Import exportNumber of results
75 ProductsCountries
Category