Monitoring control - Import export

SNMPcard DJ801 (art. CNDJ801) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

NORIMOS 4 – The High Performance PLC-based Alarm, Monitoring and Control System The N4 is our alarm, monitoring and control system (AMCS) for highest demands in operating comfort, usability, flexibility and system availability and is based on our NORISYS 4 open automation platform. It is used to monitor and control ship technology, such as engines and other auxiliary systems. The N4 is a PLC (IEC 61131) based AMCS with decentrally placed subsystems. Each subsystem is operating independently with a high performance I/O CPU master and its slave units and is connected to the other subsystems. The system is based on extremely robust components, can be used flexibly and furthermore, it can be extended with a comprehensive package of standard functions on request: whether as a simple data acquisition system, alarm and monitoring system, with additional control functions for pumps, valves and fans, or even fuel level measurement or power management.

Slave display for alarm extension systems and duty alarm systems Cabin unit for alarm extension systems and duty alarm systems (e.g. for ship cabins, mess room, office, bridge, etc.) Display of measurement value channels, channel statuses and alarms from the automation systems (e.g. IAMCS) Visual and acoustic alarm triggering Acoustic and visual fire alarm signalling from an external, independent fire alarm system (type N3000-DSP20 only) Ideal for use in shipbuilding thanks to approvals from classification societies

Master display for alarm extension systems and duty alarm systems Visual and acoustic alarm triggering Central control of additional slave displays N3000-DSP10/20 Connection of group alarm annunciator N3000-SSP01 as an extension Duty assignment and duty takeover Engineer call function Dead-man function (DMP31 only) Ideal for use in shipbuilding thanks to approvals from classification societies

The N3500 (NORIMOS 3500) is our cost-efficient alarm, monitoring and control system for engines and auxiliary systems. The system is based on two central, redundant PC master stations. They collect and monitor the measurement data from the connected I/O modules. With up to 9,000 I/Os, a matching alarm extension system for accommodation and a monitoring display for the bridge, the system can be easily extended and adapted to any application. The N3500 is based on robust components and can be used flexibly: from simple data acquisition systems up to complex alarm and monitoring systems with integrated control functions for pumps, valves and fans. The system is approved by all conventional shipbuilding classification societies (ABS, BV, CCS, DNV-GL) and thus, is the ideal companion for all aspects of the monitoring and control of shipboard propulsion systems.

During printing and coating processes, so-called ink mist or particle mist arise in the outlet of doubleroll systems. This unwanted particle deposit results in lower product quality, high maintenance costs, increased ink consumption and the contamination of the environment. The formation of ink mist is very noticeable and annoying, particularly during coating and printing processes on substrates with non-absorbent surfaces (films, metalized substrates or composite films). A patented double-row DC plasma electrode is used to prevent this ink mist. This plasma electrode acts separately on both particle streams and ensures an optimal particle deposit. The electrode will be connected to the high voltage generator HSG61. The MISTING TACKER system is currently used for printing on metalized films and in silicone coating units (Wifag-Polytype).

The LogTag Glycol Temperature Buffer is specially designed to monitor and control the temperature of vaccines during storage and transportation. The glycon buffer reflects the temperature in a vial of vaccine. With this product, you control that vaccines are not exposed to high or low temperature changes.

When transporting food products, it is important to monitor and control the transport and storage conditions.By accurately measuring the temperature and humidity during the shipment, you can prevent damage, weight loss or loss of value during transport and storage.

The intuitive configuration, control, and monitoring software MediorWorks can be downloaded from any MediorNet mainframe via the Configuration Port of the Processing Card. This way you always have access to the correct software version of a specific installation. The software is a JavaTM based application, allowing any computer with a JavaTM Runtime environment such as Windows, Mac OS X or Linux to serve as the host for the application. MediorWorks auto senses the configuration and status of the system it is connected to. Five windows give easy access to any aspect of the MediorNet installation. All windows are visible at the same time. Alternatively, they can easily be accessed via one mouse click on the “Views”-window, which is floating above all other windows. The “Device Browser” shows all available nodes, the cards installed in the node and each connector of the specific media card. If a connector is selected, the “Connections”-window shows the active connections and how the...

Pick-to-light systems control and monitor commissioning, configuration and installation processes. For example, the light screen located in front of a picking bin captures the hand of the operator and reports removal back to the control. Then job lights indicate in which bin the operator has to reach next. Pick-to-light solutions are available in various versions, also for direct mounting on picking bins.

Our filtration system is designed to work with our Mini One and PMCG units or as a Stand Alone system for filtering air delivered to the display case.

LPHC are , an acrylic-aluminium made humidification chambers designed to work with our Mini One microclimate generator. LPHC is offered in two standard sizes and also can be built as a special order in different sizes by client request. The body is made of black acrylic with aluminium and front doors from clear acrylic. RH levels are controlled through the Mini One microclimate generator. UNDER CONSTRUCTION CUSTOM STAINLESS STEEL CHAMBERS We are also offering special order microclimate chambers build to client specifications. Those units are constructed from stainless steel and depend on client expectations. All aspects of microclimate can be controlled: relative humidity, temperature and low level of oxygen can be attained. Chambers with controlled relative humidity and temperature can be built with glass doors (as in photo). Units with modified oxygen have solid, special sealed doors. Low level oxygen is generated using nitrogen generator or liquid nitrogen.

Device is sensing vibration and sending data to monitoring system.

Sensing a wide spectrum of gases. Size and look depends on measured gas. Some have build in display. Specification on the right is for carbon dioxide. Ask for other.

Our monitoring system is designed to allow users of our equipment to have access to current data 24hr. All devices, manufactured by Preservatech have on board WiFi connectivity which allows to connect with our monitoring server. COMPATIBLE EQUIPMENT Mini One PMCG Maxi One Maxi One -s Custom equipment designed and made by Preservatech RHT sensor Filter sensor (only alarm messages)

Because of the complexity of controlling both parameters, every project is designed according to dimensions, material of the case, target values as well as ambient extremes in temperature and humidity. Although we do not have standard, off shelf units we are offering: Maxi T – Large units to control temperature and humidity inside the medium size cases (5-10 cubic meters) where main generator is located inside the machine room or other technical area some distance from the display case. See below. Mini T – small, compressor based unit for installation under or behind the display case. This unit can work with venting type or cooling/heating panels system. Will work with our Mini One or sometimes PMCG units. Special, thermoelectric device for very small cases. Will work with our PMCG unit. Please note that controlling temperature and humidity requires some changes to display case design and its very hard if not impossible

Preservatech’s Maxi One constant volume humidity generator is a fully automatic positive pressure air supply device, designed to provide conservation-quality humidity control for museum display or storage enclosures. A single microclimate unit in a remote location (such as a machine room) can reliably maintain extremely stable humidity control and pollution abatement for an entire gallery of showcases. SUGGESTED APPLICATION: Use these units to supply air to multiple display cases, very large volume showcases, multiple storage enclosures or small archive rooms where: Energy cost savings of up to 50% are to be realized. Accurate humidity control in new or renovated galleries may be expensive or impractical. Existing air conditioning systems or building envelopes cannot maintain adequate humidity control.

The Maxi One S constant volume humidity generator is an automatic, positive pressure humidity control device for museum displays. The Maxi One S offers a unique scalable output: a single unit in remote location can reliably maintain stable humidity levels in multiple small, or one or more very large showcases, up to 80 meters distant. The Maxi One S can provide up to 430 cubic meters of pollution free, clean, humidity controlled air per day.One or more air pumps are used to provide filtered air at the delivery pressure and flow required for the application. In the Maxi One S the air is passed through an cooled water bath to control humidity levels, and distributed to the enclosures via flexible tubing.

The Preservatech Mini One is a miniature humidity control device for museum showcases and storage enclosures. This robust and extremely efficient unit can reliably control humidity in individual or multiple enclosures. The Mini One active microclimate generator is a sixth generation system, satisfying the demanding standards of preventive conservation and modern museum design. It incorporates the most recent developments in electronic humidity control, noise suppression, and pollution abatement — built on the heritage of a family of microclimate control devices extending back to 1978. This positive pressure microclimate control system will typically maintain the relative humidity level in a sealed museum enclosure to within two percent (or less) of your target relative humidity. Depending upon the ambient temperature conditions and enclosure construction, relative humidity levels of less than thirty-five to over eighty percent can be attained.

The PMCG humidity generator is a novel approach for controlling humidity in museum quality display cases. The PMCG units are based on solid state technology – unlike other units, they don’t require filling or emptying of reservoirs. Once the machine is setup, the humidity inside the display case is maintained for years without the necessity of checking the water level, adding water or any other regular maintenance. PMCG devices are able to maintain relative humidity from below 25% up to 60%, at ambient temperatures of below 0°C up to 40°C. The newest models are equipped with a WiFi connection to internet.

We have a skilled quality control team and a laboratory that enables us to carry out trials and tests to ensure the quality of raw materials and finished products. As soon as we receive the raw materials, we carry out the necessary tests to ensure that they comply with the specifications provided by the suppliers. Monitoring and controlling the manufacturing process Ensuring traceability of manufactured products Ensuring that finished products comply with CTRA standards and/or customer specifications by carrying out various in-process checks. Non-destructive testing Visual / Dimensional Polymerisation Destructive testing Calcination test (loss on ignition) > in-house Peel test (separation) > in-house Tensile test > carried out by an approved external body Bending test > carried out by an approved external body

Outdoor cabins are produced as cabins, which are preferred in the field of use for GSM and operators. It is used for GSM base station, outdoor field and many other areas against external factors. Creates a protected system. These cabins work as a result of various testing systems. It has many features. Some of them are voltage protection, intelligent control unit, heater, smoke detector, humidity sensor, remote monitoring and remote control. Today it is used and needed in many areas. Advantageous and convenient are the cabins.

Complete optical packaging inspection Vision inspection system SealSecure checks the seal and seams on the package, labels and information on the top and bottom or the sides of the products. The stand-alone vision inspection device detects non-conforming packages prior to packaging and rejects them, if there are product, package discrepancies or deviations. The staff are then immediately warned visually and audibly in order to be able to intervene and rectify the problem. Vision inspection system SealSecure prevents extensive and costly rework, eliminating claims and product recalls due to non-conforming packages. In addition, the Vision inspection system SealSecure ensures that only flawless products reach the market or end user. In addition, all the product images are saved in the production system and the relevant production reports are generated, the vision inspection system contributes to complete traceability of the production line. The Vision inspection system SealSecure...

Efficient control of packaging and label content in labeling lines The Bizerba LabelSecure vision inspection system automatically checks label position and texts. Bizerba LabelSecure can be integrated in conveyor lines with dynamic checkweighers. Thereby offering a high level of flexibility and adaptability to existing systems. Used with an inline dynamic checkweigher the system will add another level of protection on your production line. Consider the Dynamic checkweigher CWEmaxx. The system will checkweigh and reject any over filled and under filled packages. In addition, the vision inspection system performance is impressive, automatic control of label position, texts and film colour. Any packages that do not conform to the programmed or set criteria will be rejected. Also, package sizes and bar codes are verifiable. All packages that fall outside of the date range set up in the Vision Inspection System will be rejected, Ensuring out of date or short sell by dated products...

The end-of-line X-ray inspection system offers maximum safety. By using X-ray technology the XRE-D detects contaminated, damaged and defective products and packagings. Besides metallic and non-metallic foreign objects it detects missing, defective or misshaped products as well as overweight or underweight. Thanks to an efficient quick conveyor belt change system the belt can be changed within two minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...

The recording of operating data such as flow volumes, pumping pressure, operating hours and power consumption of the pumps etc. is essential for the state monitoring of – usually municipal – pumping stations and pressure line as well as for the diagnosis of machine components. Data recording system with LCD display for the electronic acquisition, display, recording, evaluation, remote transmission and archiving of up to 6 analogue and digital input signals. Product features For daily, monthly, annual evaluation; meter statuses, operating times and volumes; min., max. and mean value recording Multi-colour display, digital, bar chart and graph representation Archiving in the internal memory and on compact flash card (no data lost in the event of a power failure!) Remote data transmission via standardised interfaces Suitable for door installation in the AWAcontrol control cabinet