Monitor indicator - Import export

A flow indicator or flow monitor makes it possible to visually observe the passage of a fluid. It is therefore equipped with a transparent window to visualize the flowing fluid. In the case of transparent fluids, it is also equipped with fins that can be seen rotating in the presence of a flow.

Multisensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable monitoring of leaking an broken bags in dust collectors • sensor configured remotely via controller • large graphic and numeric display • reduces filter maintenance intervals, process downtimes and filter costs

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.

The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values  two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set.  Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.

System 3000 reliably protects stone crushers, waste compactors, mills and other processing plant which could be damaged by larger metal parts. The MDV/MU analysis devices of system 3000 feature, dependent on the variant,m a comfortable installation and set-up using automatic calibration, self-monitoring, reset function, pre-attenuation indication, sensitivity potentiometer and test function. Optionally, devices with multiple functions are available in the miniature control cabinet as well as robust water-tight variants for outdoor use. To increase sensitivity or range, it is also possible to connect several coils to an analysis device.

The sterilization documentation system is used for patientrelated traceability of all medical sterilization processes. The documentation page contains all the necessary information to release the sterilization batch. One sterilizer and one documentation sheet for the day are used. Using a labeling device (Label Gun), the documentation sheet and each package can be labeled with a selfadhesive label containing the following information • Production and expiry date, •Person in charge, • The contents of the packaging, • Sterilizer and batch number. All packages on the lot and documentation pages have the same label content and lot number. After opening the sterile package in the OR, the top layer of the label can be peeled off and affixed to patient and/or operative documentation. The content of the label allows for followup on the patient's return to batchrelated documentation in the sterilization department.

Multi-Charger 12-240 V for Accu-Greaser 18V Battery charger with overload protection for Accu-Greaser 18V, input range 12-240 V, features 3 LED monitoring bulbs to indicate charging status, 2 m cable for mains connection with with UK 3 pin plug. Item is equipped with additional port for 12/24 V supply cable for mobile charging from vehicle power supply. 12/24V cable separately available.

The dry contact board (relay card) is used to provide the UPS peripheral monitoring interface. Contact signals can indicate the current status of the UPS. The appearance and pin numbering of the dry contact relay board may differ depending on the UPS model

Robust, double-walled storage tank made of polyethylene, UV resistant, for outdoor use. max. filling capacity 5000 l; wall thickness approx. 9 mm (inside); anti-leakage warranty 10 years. (incl. pump and accessories) Equipment/accessories: - Self-priming vane pump Panther 72, 230 V. - Diesel filter in metal housing, with water separator - Mechanical counter K33 - Lockable dispensing cabinet with double lock - Wireless level sensor, connected to the monitoring system (leakage indicator) in the interstitial space - Filling hose 1 length 6 m. with automat. A60 nozzle - Lockable filler cap - 16 Service hatch on the outer wall enables tank cleaning to be carried out - Tank vent on the filling lid - Lighting of the dispenser - Electronic overfill protection Dimensions approx. W 2.38 m x H 2.03 m x L 2.95 m Weight (incl. pump equipment) approx. 380 kg Optional: Filling line with overfill protection and tank truck connection Art.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

Battery diagnostic system Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Mini-USB port for firmware update 37-pin signal interface for cell contact plug Sealed housing, protected against internal pollution Cell voltage monitoring Status indication via display and high power LEDs Menu navigation: English, French, German, Italian, Spanish Wide range of accessories e.g. mains and charging cable, wall mount adapter etc. Option: Customized charging parameters Option: Regeneration charging for deep discharged batteries Electrical safety – certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07, GS, RU Utilized and approved by first-class automotive manufacturer

Softcontrol Data offers individual setting options and a clear presentation of the information on the display. The device is a comprehensive alarm system for upstream water softening systems with high safety requirements for the soft water quality. The limit values ​​for the water hardness can be set in the range from 1 ppm to 18 ppm based on the input water hardness. The measurement data and service messages are automatically saved in the readable, integrated USB stick and transmitted via a current loop and LAN interface with MODBUS / TCP. For increased operational and process reliability with the best user friendliness. A continuous measurement takes place approx. 2 times per minute as long as water is flowing. indicators are not used and an ion-selective sensor is used instead. This monitors itself and indicates the required exchange itself. This is usually the only maintenance on the device that has to be carried out around twice a year.

Softcontrol Carbonate is used to monitor the decarbonised water after a decarbonisation system. If the parameterizable limit value is exceeded in the range from 9 ppm to 90 ppm, an alarm is triggered. the device measures approx. 2 times per minute with the help of the integrated ion-selective sensor. Thanks to its continuous analysis, it offers protection for downstream systems and their processes. In addition, the device system monitors itself and automatically indicates the simple change of the sensor without additional tools. The measured values ​​are shown on the display and output via the parameterizable 4 to 20 mA current loop.

Wind velocity indicators are used for detecting and in connection with the appropriate indicator, monitoring a maximum wind velocity. They are used mainly in safety and monitoring systems of cranes and excavators. Two models are available. One with pendulum orientation, especially suited for the attachment on jibs of mobile cranes, and a common one, pedestal mounted or mounted on a vertical post. The output signal, being proportional to the wind velocity is taken either from a built-in tachometer generator in form of a voltage or from an optoelectronic impulse transmitter with frequency-current converter in form of a current signal in two-wire technique. For applications in the temperature range down to minus 50 °C there is optionally available for both models a mounting arrangement for a temperature controlled heating device. Cross arms feed-through sleeve and crown are splash-proof, degree of protection IP 65.

- Measuring average volumetric flow rate in flow directions - Totalizing volume of flows independently or calculating their algebraic sum with regard to flow direction - Determining the current value of flow velocity and flow direction - Outputting measurement results to the frequency/pulse or logical output - Logging of measurement data and configuration settings in the internal nonvolatile memory - Displaying measurement, configuration and history (logged) data on the built-in indicator (LCD) and outputting the data to the external devices via M-BUS interface or RS-485 interface - Configuring the flow meter according to on-site and process requirements - Monitoring and indicating alarm conditions (ER, error situations) and faults; recording error and fault types and intervals into the corresponding logs - Protecting logged data and configuration settings from unauthorized access, -R400 -MAP16 -EN ISO 4064, -OIML 49, -RO-2275-15356 (TYPE APPROVAL)