Moisture measuring sensors - Import export

The onion planter is very simple to use. First of all, the seed tank of the machine is filled and the soil regulating mechanism is activated. Then, the moisture sensor measures the moisture level of the soil and the sowing amount of the seeds is adjusted according to the moisture level of the soil. onion planter, It sows the seeds in the soil regularly and regulates the soil, ensuring that the seeds are well placed. The use of onion planter ensures good seed placement by providing water and regulating the soil to increase soil moisture if the soil moisture level is low. In this way, soil moisture level ensures good seed placement and growth. The onion planter has a special sowing mechanism that sows the seeds in the soil regularly. The onion planter has a special seed storage and a special soil regulation mechanism. This mechanism

Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.

The new white light interferometer IMS5600-DS is used for distance measurements with highest precision. The controller offers a special calibration with intelligent evaluation and enables absolute measurements with subnanometer resolution. The interferometer is used for measurement tasks with the highest accuracy requirements, e.g., in electronics and semiconductor production.

The thicknessGAUGE O.EC is a compact inline measuring system in a stable O-frame design with an aluminum roller and an integrated control cabinet. The system is used for precise thickness measurements of plastic strips and coatings up to 3 mm material thickness and web widths up to max. 1250 mm. To obtain a cross profile of the material thickness, the sensor is traversed over the film. Keeping the sensor fixed at a particular position enables a thickness profile to be generated. Integration takes place in complete production lines, e.g., in plastics production and battery film production. The systems can be integrated into new plants or retrofitted directly into existing plants.

thermoMETER CTLaser pyrometers are used for both industrial measurements and R&D. Two laser beams mark the measurement spot which ensures precise temperature measurements. The smallest measurement spot is 0.5 mm. The thermoMETER CTLaser infrared pyrometers can be used with various measuring objects. From extremely low temperatures (-50°C) to the highest temperatures (975°C), these IR pyrometers measure precisely and reliably.

The optoNCDT 1900 offers a unique combination of speed, size, performance and application versatility for displacement, distance and position measurements. This compact triangulation sensor achieves a high measurement accuracy and measuring rates of up to 10 kHz. The high-performance optical system generates a small light spot which enables to even detect the finest of details and structures reliably.

The RS422/USB converts digital signals from up to 4 optical sensors into a USB data packet. The new converter has 4 trigger inputs and a trigger output for connecting additional converters.The data are output via an USB interface. The converter as well as the connected sensor are parametrisable by software.

Modifying the standard eddyNCDT sensors is sometimes necessary particularly for small and large series. Therefore, we modify the measuring systems according to your specific requirements, e.g., changes to the cable, sensor material and design, and to the controller. In particular, sensors with integrated electronics in a miniature housing or special sensor designs are often requested by systems integrators.

The SGS (Spindle Growth System) 4701 displacement measuring system is developed for high speed milling machine applications. Due to high machining speeds and the heat generated, the linear thermal expansion of the precision machine tool spindle needs to be compensated for in order to keep the tool in a defined position at all times. The SGS sensor measures the expansion of the spindle caused by thermal and centrifugal force. The measurement takes places typically on the labyrinth-ring. As well as the linear expansion, the temperature of the sensor is detected and output.These measurement values are fed into the CNC machine tool as correction values, compensating for any positioning errors.

The specific sensor configuration of the linear displacement sensors in the LDR series is characterized by a short, compact design with small diameter. The compact design and the small sensor diameter facilitate the installation of the measurement systems in locations where space is restricted.

Inductive sensors from Micro-Epsilon are based on the eddy current principle and designed for non-contact measurement of displacement, distance, position, oscillation and vibrations. They are particularly suitable when high precision is required in harsh industrial environments (pressure, dirt, temperature). Inductive sensors from Micro-Epsilon offer extremely precise measurements where sub-micron accuracy is required.

Sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • extended measurement range, up to 85 % moisture • high temperature version up to 190 °C • measurement accuracy 0.1 % • recording of surface moisture and capillary moisture

Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature measurement. • highly resistant to abrasion • integrated temperature reading • flow detection function • measurement accuracy 0.1 % • ATEXcertified

Microwave sensor for continuous moisture measurement in dry bulk solids and installation on conveyor belts, screw feeder or hoppers. Microwave based sensor for high resolution and accuracy. • highly resistant to abrasion • integrated temperature reading • flow detection function • moisture ranges 0 65 % • measurement accuracy 0.1 % • ATEXcertified

The precise and compact surfaceCONTROL 3D 3500 3D sensor is ideal for automated inline inspection of geometries, shapes and surfaces on diffuse reflective surfaces. With a z repeatability of up to 0.4 µm, the sensor sets new standards in high-precision 3D metrology.

Reliable and accurate handheld tool for the lumber and woodworking industries.

The sensor is used to measure the moisture of concrete aggregates and is typically installed over a silo belt feeder or a conveyor belt or under a silo trap door to have a view on a moving sample. Current loop is available for feeding the data into your PLC, and a software licence for a PC to calibrate the sensor as well as view and store the data is also included in the system. There are no moving or wearing parts and as the measurement is done by a non-contact remote sensor, the maintenance cost will be very low.

The AQUATRAC-V is a residual moisture meter that can be used in the laboratory as well as in production without qualified personnel. The Measurement is reliable, water-selective and safe using a reagent the calcium hydride. The water released from the sample reacts with the calcium hydride to form hydrogen, which is measured by increasing the pressure in the system and gives a measure of the water content of the sample. This measuring principle is listed in ISO 15512:2019, "Plastics - Determination of water content" as method e.). The same standard also contains the Karl-Fischer measuring principle. The measuring instrument has a robust construction and is designed for use without qualified personnel in production and laboratory. This makes the AQUATRAC-V the world's only standard-compliant water-selective measuring instrument for use in production.

Parameters Basic Parameters Bus Power Supply: 9～32VDC Current consumption (static)：≤14mA（FF/PA） 11V～35 VDC(HART) Input Signal: Pt100, Pt1000, Cu50, Cu100 Ω, 0, 0 to 500 ~ 4000 Ω Resistance, B, E, J, N, K, R, S, T eight degrees of Thermocouple, -100mV ~ 100mV Voltage Signal The Channel Number: Single Channel Fieldbus Protocol: FF/PA/HART Insulation: Between the Terminal and the Housing：500Vrms(707VDC) Operating Temperature: -40℃～85℃ Humidity Range: 0%～95%RH Starting Time: ≤5secs. Turnover Time: 0.5secs. Electromagnetic Compatibility: In Line with the GB/T 18268-2010 Explosion-Proof Sign: Ex ia IIC T4 Ga (HART)