Results for
MMOTORS JSC
Bulgaria
Bathroom fans are the most popular and affordable modern solution for the removal of moisture from wet rooms and the prevention of mold and fungus formation. MM Series — Bathroom and WC fans featuring modern design, high airflow rate and uncompromising quality. These fans provide continuous or interrupted ventilation in the sanitary facilities at extremely low power consumption. They can be used to purge air from small and mediumsized residential, office and commercial premises or as heat exchangers between adjacent premises. The fans are mounted on walls, ceilings and suspended ceilings and are attached to air ducts or pipes of the building’s ventilation system with connection diameters 100 mm, 120 mm and 150 mm. Safety The MM Series fans are made of highquality and harmless materials, and they comply with noise and fire safety standards. The protection degree of the builtin electric motor is IP 24, IP X4, IP X5 and IP 56 which enables the fan to normally operate in high humidity
Request for a quoteYALCIN GROUP
Turkey
We provide ventilation with our own production of snail fans using polypropylene material. 2) DETAILS General Features: We provide ventilation with our own production snail fans using polypropylene material. Technical Specifications: Areas of Use:
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
A mixed-flow fan combines the advantages of axial fans with the characteristics of radial fans. Simply described, it is an axial fan with a fan wheel in radial format. This provides a cost-effective design, in duct or box design, with a stable fan curve and relatively high pressure. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit. Mixed-flow fans are usually used as ventilation fans. Typical applications are ventilation solutions in gyms, sports halls, warehouses, commercial kitchens, factories or airport terminals. Depending on requirements, the design of a mixed-flow fan can be completely adapted to the customer’s needs. With the right dimensioning and material selection, a mixed-flow fan will work problem-free for many years.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
A roof fan can be the same name referring to two different types of fans. On the one hand, it is the classic fan that is mounted indoors in homes and spins around to create an air flow in a room (these are also called HVLS fans (High-Volume Low-Speed)). And partly it is the type of fans that we work with – i.e. fans that are mounted outdoors on roofs belonging to e.g. apartment buildings, schools or industrial premises. A roof fan is a fan that is part of the ventilation system and has the task of extracting hot air, moisture and pollution from the indoor space and blowing them outside. The fans are usually designed to be robust and weather resistant as they are mounted on the roof. Of course, there are a variety of material designs adapted to the application needs.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
The wall fans we offer are direct-driven axial fans that are easily installed in walls or ceilings. The wall fans can be in 1-phase or 3-phase design. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials The fans are usually supplied as a complete unit, but we can also offer new impellers for existing wall fans.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Renewable energy sources are something that is becoming more relevant every day. Biogas is an alternative and here FläktComp Sweden can contribute with high-quality fans that ensure that the biogas is handled correctly. Biogas fans are a type of gas-tight radial fan, adapted for use in biogas environments where the demands on materials and performance are very high. The fans are usually delivered as a complete unit consisting of fan wheel, motor, cover and vibration feet. In order to choose the right biogas fan, one should start from operating data and process design, as well as whether there are any special requirements.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
In tough applications such as e.g. high temperatures or movement of corrosive gases, it is not always possible to mount a motor in the volume flow. The solution for this is the so-called bifurcated fan which is an axial fan where the air flow is divided in a tunnel, which means that the motor is not in the volume stream. It is thereby protected from possible harmful particles or high temperatures. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
ATEX fans are fans that are installed in environments where there is a risk that an explosive atmosphere can form. Therefore, these fans need to be designed according to the ATEX directives. Depending on the classification of the environment, internal solutions inside the fan, such as e.g. spark protection in the fan cover or non-sparking materials. While in other cases, EX-rated motors are also required. Explosive gases require special fans. Our factories are certified according to ATEX for the manufacture of fans for Zone 1 and 2 as well as for Zone 21 and 22 containing dust. The design, production and use of fans for explosive media or environment is clearly specified in Europe by standardized directives. To choose the right ATEX fan, one should start from operating data and process design, as well as whether there are any special requirements.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Axial fans are a type of fan that creates airflow through a fan wheel that rotates around an axis and moves the air parallel to the axis. Axial fans can also be called propeller fans and are usually delivered as a complete unit consisting of fan wheel, motor and cover. Typically axial fans are direct driven with the impeller mounted on the motor shaft. There are also other designs such as e.g. belt-driven or with shaft bearing and coupling. The axial fan’s strength is to transport large volume flows at low pressures. At higher pressures, a centrifugal fan may be a better choice. To reach higher pressures with axial fans, these can be connected in series. Usually, the efficiency of an axial fan is comparatively lower than that of a centrifugal fan. But by using guide rails, diffusers and other accessories, an axial fan can reach the same or higher efficiency. The flow of axial fans can be regulated with vane or damper or speed regulation.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Radial fans or centrifugal fans are a type of fan that uses centrifugal force to create a pressure increase and a volume flow. This type consists of a fan wheel that rotates in a snail-shaped cover. The flow enters the fan through an inlet placed axially with the fan wheel shaft and motor, and is then thrown out radially with the help of the force from the fan wheel. Unlike axial fans, the motor is not in the volume flow of radial fans. To change the performance and characteristics of centrifugal fans, different designs are used on the fan wheel. The strength of the centrifugal fan is its versatility. A radial fan can be designed to transport a variety of volume flows at a wide range of pressures. At higher flows and relatively low pressures, an axial fan may be a better option. Centrifugal fans are available in single and double suction versions.
Request for a quoteERF GROUP
Turkey
USAGE AREAS * In marble machines * In the supply of combustion air for gas, diesel burners * In the transfer of residues such as dust, clippings, etc. * In the storage of granules and particles * In blow-drying machines * In textile machines-placket spreading machines * At exhaust metering stations * In extruder machines * Can be used safely in industry for wide purpose
Request for a quotePOLMAK MAKINA LTD. CO. - POLFAN
Turkey
- Low Pressure Radial Fan - Directly Coupled Motor. - Backward-Curved (BC) Blade Fans. - Revolvable Fan Case. - On Demand, Special Stainless Steel Manufacturing Is Available - Air Flowrate : 3.500 - 54.500 m³/h (Min. - Max.) - Pressure (Pt) : 40 - 265 mmss (Min. - Max.)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
UVENTS VENTILATION SYSTEMS
Turkey
Since the impellers are made of aluminium as areas of usage gas plants and acidic places preferred. Aspiration of smoke, iron foundry, cement plants, and paper mills Aspiration of moist and dusty air Industrial buildings, animal farms, greenhouses, garages, sport centers, and parks etc.
Request for a quoteERF GROUP
Turkey
These fans have low heights, they are suitable for car parks with a height of less than 2.4m or with cassette entrances. They can operate continuously for 2 hours at 300 and 400 °C. F400-120 / F300-120
Request for a quoteERF GROUP
Turkey
These fans, which are used in the ventilation of closed environments, can operate without problems with their high performance, they can operate even at high temperatures since the engine is outside of the air flow.
Request for a quoteERF GROUP
Turkey
ERF-CAT double suction centrifugal cell fans are produced in different sizes between 1.000m³/h and 20.000 m³/h flow rates. Cell panels are 20 mm thick and 70 kg/m³ density rock wool insulated. They provide maximum efficiency with low energy and vibration-free operation.
Request for a quoteERF GROUP
Turkey
The propellers of AKAP sleeve fans, which can meet high air flow rates and high pressure losses, are made of aluminum raw material and they provide the chance to change the flow and pressure by adjusting the blade angles. They can be produced with a motor that can withstand temperatures of 200, 300, 400 °C for 120 minutes upon request.
Request for a quoteERF GROUP
Turkey
Air Handling Unit Production with 800 - 100,000 m3/h flow rate. 20 different models and a wide selection. Ability to be disassembled thanks to the modular system Easy pointing and mounting Tolerant values and maximum efficiency in the selection of fon, heater, cooler, filters, dompers, electric motor, heat recovery device and muffler.
Request for a quoteERF GROUP
Turkey
USAGE AREAS -It is used in the heating industry for burning solid and liquid fuels in boilers and providing secondary air in a controlled manner. -In the ventilation of closed environments -In industrial machinery belonging to the jewelery sector -in the textile industry -In mines and mushroom farms -In plastic injection machines -In the combustion air supply of gas, diesel burners -In humid and humid environments -In the greenhouse industry -In chicken coops -Used in many areas of the manufacturing industry
Request for a quotePROKTES
Turkey
manufacturer of all types of roof mounted axial fans
Request for a quoteDOMINO SIGN
France
Round PVC aerator caps Drilling diameter: 25, 43 and 70mm Color: white
Request for a quoteINTAX TRADING SRL
Romania
CONNECT TC100S Mix Flow Inline Blower CONNECT series is a mixed flow inline exhaust fan in various sizes. Specially designed for installing ventilation systems with high pressure, strong airflow and low noise levels. Energy Saving motor with ball bearing for log time operation. Removable body for easy cleaning, without the need to move the ducts. Mix Flow Inline Blower CONNECT are powerful enough to ventilate multiple areas with a single unit for one or more rooms of varying sizes Quality motor: Ball bearing motor Auto cut-off fuse built in motor Silicon steel lamination Pure copper winding ProtectionIPX4 Input/ Output Ducted Diameter (mm)97 (for 100 mm ducting tubing) Electrical ClassificationClass 1 Indoor/ Outdoor SuitabilityFor Indor Use Only Climatic ClassificationTropical Condition Gross Size (mm)300x180x236 Net Size (mm)297x177x234 Gross Weight (kg)1.99 Net Weight (kg)1.78 Speed selector included✓ Speeds2
Request for a quoteERF GROUP
Turkey
EFKC filtered shelter fans are used to supply fresh air. It can be used in two different positions thanks to the by-pass cell. Normally, the air is sent indoors only by passing through the G4 Filter. When we want the air to be cleaned, it is passed through the G4 cassette filter, active carbon cassette filter and M6 cassette filter, which is more sensitive than the coarse filter, and sent indoors. By-pass air dams are made with a sliding system.
Request for a quoteResults for
Mobile ventilation fans - Import exportNumber of results
35 ProductsCompany type