Mixing solutions - Import export

PYK series products that have wide reduction ratio and high resistance against heavy and variable loads in horizontal, vertical and inclined feed mixing systems provide optimum solutions in TMR systems for cattle and small cattle livestock facilities.

Slow speed aerators used for aeration and mixing of urban and industrial wastewater in various processes Provided in either fixed bridge or floating designs Ideal for Aerating most types of wastewater or industrial euents The TLF® Turbine Aerator is one of the most ecient aeration products in the marketplace Produces High Mixing and Homogenous Solutions in large lagoons and ASP tanks. IP55 geared motor with IE3 highly efficient rating Coupling sleeve and based materials coated with high grade Epoxy Paint Float can me supplied in various materials including HDPE Rotor made of glass fibre reinforced polyester. The GRP has a low density which allows installation without having to empty the tank and the design also reduces the axial loads on the gearbox.

Following the market trend, the new SPIES PC meets all requirements - from weight optimization and resource conservation to the use of renewable raw materials. Your desired article geometry can be developed individually.

CALMAG is a mixed solution of calcium and magnesium salts which is effective in the prevention and cure of physiopathies due to the specific deficiency of these two meso elements. The application of magnesium and calcium at a recommended dose prevents dissection and necrosis of plants and fruits. In particular, calciumprevents calcium deficiency physiopathies (rotten apple, rotten tomato, desiccation vine, lettuce necrosis, physiological melon desiccation and cracking of fruits) and improves quality, consistency and conservability of fruits; magnesium , on the other hand, stimulates the formation of chlorophyll and improves the photosynthetic activity increasing sugar concentration and and improving the color of leaves and fruits. CALMAG is enriched with molybdenum which reduces desiccation, reduce stress and fight free radicals. CALMAG is particularly recommended for fourth range crops.

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

For liquids that have to be mixed before processing and then pumped or contain small solids, the new Diaphragm pumps with an integrated air-operated Double diaphragm pump is the perfect solution. The mixing and pumping process takes place via a suction and mixing tube and a 3-way valve. The pre-assembled system is immediately ready for operation with a few simple steps and is also suitable for explosive liquids. * Mixing and pumping integrated in one system * stufenlose Regelung der Folgeplatte über Steuerventil * Media examples: Paints and varnishes, emulsions, dispersions, suspensions, water/oil mixtures, liquids with increased viscosity and solids content Features & Advantages * Quick installation and time saving through easy handling * Compact design * Base plate offers good stability on the container lid * Easy to insert into the 2" bunghole of the container by balancer or overhead crane * No further mixer necessary

Constructed with a single layer of advanced structural reinforcement and utilizing the same proven silicone rubber wear surface, Airflex® is the preferred solution for large mixed fleets at some of the most prestigious airline operators worldwide. For technical data, color, design choices and dimensions, please see our technical data sheet here. AIRFLEX GP Datasheet Product Flyer

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

Improve application of wound sealing agents POREX® topical applicator filters and wicks are designed for fluid-based application of sealing agents for wound closure, such as surgical adhesive or drug delivery in dental treatment applications, and can also serve as a filter if the solutions are mixed and expressed from crushed glass ampoules. Designed to provide maximum performance for topical applicators, our filters and wicks: Deliver optimal wicking rates–Design provides optimal wicking rates of the liquid adhesive from the reservoir to the tip surface, which is then used as the applicator. Deliver precise application – POREX topical applicator tips provide specified lay-down of the liquid adhesive to the wound surface. Ensure appropriate press-fit seal and manufacturability–Filter strength and pliability ensures appropriate seal between the filter applicator and the device’s exterior barrel, and also allows for automated assembly processes and sterilization via gamma or...

Laboratory adjuvant, predosed. Biocompatible and easy to handle: Just mix with antigen solution. Strongly active, for research purposes. Effect superior to FCA but less side effects. Becomes semisolid in refrigerator for long-time storage. Replaces GERBU Adjuvant LQ, 10 and 100.

Challenging, customer-specific mixing technology solutions can be numerically simulated as early as during the planning phase, and the results analyzed. This means increased design confidence, high-quality solutions and, as a result, reduced project durations and costs. Our experts from THINK Fluid Dynamix® are specialists in the application of numerical techniques such as flow simulation in real time and artificial intelligence methods for automated optimization. This enables processes, such as stirring and homogenization, to be analyzed more accurately under consideration of all applicable process parameters, and complex tasks to be processed far more efficiently. These methods set entirely new standards in terms of design reliability and efficiency. Allow us to contribute to your success!

Side-entry agitator for mixing below liquid surface. The PDR is a simple side-entry-agitator for mixing below the liquid surface. The PDR is recommended for applications where low viscous liquids are mixed turbulently in high tanks and where a top-entry mixer would be too heavy due to its shaft length and –diameter. The sealing between the agitator and the vessel is done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.

PDR - Side-entry agitator Side-entry agitator for mixing below liquid surface. The PDR is a simple side-entry-agitator for mixing below the liquid surface. The PDR is recommended for applications where low viscous liquids are mixed turbulently in high tanks and where a top-entry mixer would be too heavy due to its shaft length and –diameter. The sealing between the agitator and the vessel is done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.

Extremely biocompatible and effective. For large, particularly sensitive animals such as horses and camels, potentially also for human pharmaceutical use. High API concentration for small injection volumes. Free from Saponins. Cationized particles of tocopherol and lecithin plus GMDP and other immunostimulators. Very stable and easy to handle: just mix with antigen solution. Strongly active, for research purposes. Effect comparable to FCA but less side effects. Becomes semisolid in refrigerator for long-term storage

SURFECO® PLUS is a super-spreading surfactant based on a trisiloxane ethoxylate, a silicone polyether copolymer with 550 molecular weight. SURFECO® PLUS has super-spreading properties in aqueous solutions while remaining stable in formulations from pH 5 - 8. SURFECO® PLUS can reduce surface tension in aqueous solutions at use levels up to 1.0 % by weight. Typical recommended starting level is 0.1 %. Stable effects during storage period Super-spreading and wetting Lowers surface tension more, compared to conventional surfactants Provides an aqueous surface tension of 21.5 nM/m2 Effective and remaining stable in formulations from pH 5 - 8 Low viscosity Very effective at low concentrations SURFECO® PLUS should be added directly into tank and agitated to ensure proper mixing. For optimum performance, solutions containing SURFECO® PLUS should be applied within 72 hours after mixing.

Superior quality, made entirely from stainless steel. Touchless water activation by large and robust stainless steel pedal/s or automatic activation by sensor/s. Elegant and robust fully integrated faucet in the dispensing area. Hygienic faucet design hidden water jet, separated from faucet walls, difficult to reach. Flat top plate enables bottles to stand properly. Vandal resistant model, the top plate can not be removed,allen screws. Easily regulated cold water temperature (thermostat). The installation of a purification filter is recommended for better water quality. A8OP Sensor for cold water. Ideal solution to fill bottles. A88 2OP Sensor for cold water. Sensor for room temperature water. Ideal solution to fill bottles. A8PE Pedal for cold water. Ideal solution to fill bottles. A88 2PE Pedal for cold water. Pedal for room temperature water. Both pedals simultaneously mixed water. Ideal solution to fill bottles.

Alloy 22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Alloy 22 has resistance to oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi-purpose plants where such “upset” conditions occur frequently. Please note that we have a minimum order value of £10,000.

/ Process Agitators Standard Agitators On the field of mixing technology MPT cooperates with Milton Roy Mixing Co. Milton Roy Mixing is the leading French agitator manufacturer based in Samoreau near Paris. More than 70 % of the agitators produced there are sold outside the EU. Milton Roy Mixing was founded in 2003 as a division of Milton Roy Europe after the takeover of the agitator manufacturer Robin. For covering all agitator-related requirements two product ranges are manufactured and offered.  For conventional applications in water technology the HELISEM standard agitators are available as stated in the table below. Typical applications are: Mixing liquids, Producing different suspensions, Homogenizing substances in neutralizing plants, Producing lime suspensions, Dissolving solid matters, Homogenizing polyelectrolyte solutions, Flash mixing in coagulation plants, Flocculation processes.  Depending on the application and the container volume, the suitable agitator model

Oily Skin Care Gel is recommended to use to treat the active stage of acne. The gel contains sulfur, which successfully reduces the sebum secretion without disturbing the natural microflora, and has antiparasitic and antimicrobial effects. Aloe Vera latex restores the function of immune cells, reduces inflammation and irritation, and soothes the skin. The high molecular weight hyaluronic acid forms a protective microfilm and acts as a "wet compress", i.e. it retains moisture in the skin without disturbing the moisture balance, even with aggressive therapy. The gel is not addictive and can be combined with other products, which allows to incorporate it into anti-acne therapy, mix it with other solutions as a complex, and use it for prolonged periods.

MIXACO Heating/Cooling Mixer MIXACO’s combined heating/cooling mixers are the optimum solution for complex mixing challenges. The systems are characterized by their outstanding product preparation in the heating phase and high-efficiency cooling performance. The horizontal and vertical heating/cooling mixers are designed for high-volume throughput, rapid processing and short cleaning times. The Relaunch of a Classic Tried and Tested Technology With New Product Concept and Attractive Price-Performance Ratio The consistent development of tried and tested technology is a MIXACO hallmark, which also applies to our heating/cooling mixers. The product line has been completely redesigned following comprehensive analyses of all components. In addition, our range of international maintenance and support services are optimized continually and are under continuous review.

Audio Special Purpose are a semiconductor device designed to filter, drive, amplify, convert, and interface an audio signals. The characteristics are function, applications, number of channels, interface, voltage, and specifications. The applications include audio systems, automotive audio, consumer audio, musical instruments, professional audio, communication systems, telecommunication systems, digital audio, driver, pre-amplifier, signal mixing, signal processing, voice trigger solution, or 10 Base-T.

VCSP excels in crafting specialized systems for the food industry. When it comes to mixing vegetables, our solutions are unparalleled. Using advanced vibratory technology, we ensure gentle handling, preserving the freshness and texture of each vegetable. Our conveyors are tailored to handle diverse vegetable types, from leafy greens to tubers, ensuring a consistent mix. The modular design offers scalability, perfect for varying production needs. With precision controls, we guarantee the right mixing ratios for a uniform blend. Hygiene is paramount; our systems are designed for easy cleaning, minimizing contamination risks. With VCSP, you get a reliable, efficient, and sanitary vegetable mixing solution.

*MX Series Supplies 400 to 1200gr FAC per hour as Oxidant rich Sodium Hypochlorite With its unique pre-assembled skid, plug&play concept design, HypoX® MX Series brings the advanced electrochlorination opportunity for the need of smart and sensitive disinfection requirements in mid-rate yet in industrial level oxidizing agent production. *By using only Salt, Water and Electricity, produce your own sodium hypochlorite! * Advanced Oxidation with Residual Effect Experience the benefits of Oxidants with the advantages of Chlorine, and forget the disadvantages; Mix Oxidant solution will be offering the benefits like; - Removing all pathogens - Oxidizing Iron, Manganese, and Arsenic better than chlorine - Lowering Disinfection By-Products (TTHM & HAA) - Removing Biofilm on the lines - Enabling chlorine ions to reach 2.5 times further - Eliminating chlorine taste and odor