Micrometers - Import export

A quick thickness control of blankets, plates or underlay foils outside the printing press: This is the main function of the transportable, analog BIRKAN thickness gauge. It allows you to check in no time the thickness of your cylinder packing and prevent printing problems. The thickness gauge is equipped with a special feeler for soft materials such as rubber printing blankets. However, other materials not thicker than 5 millimetres can be equally measured.

The optoCONTROL 2700 is a compact LED micrometer for the precise measurement of diameter, gap, edge and segment. The micrometer is characterized by its high accuracy with a measuring range of 40 mm. As the controller is integrated in the receiver, the cabling and installation work is reduced to a minimum. Thanks to the active inclination correction, objects tilted by up to 45° are also detected extremely precisely. The configuration is performed conveniently via the web interface and enables the parameters set up of video signal, filter and different measuring modes. In set-up mode, a shadow image can be used for simple alignment of the measuring object. The excellent price-performance ratio rounds off the service package.

The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications in quality monitoring and production control. The measurement object can be placed at any position within the light curtain and the distance from transmitter to receiver can be freely selected.

The optoCONTROL 1200 is based on the principle of light quantity measurement. The compact laser micrometer has all the evaluation electronics integrated in the case and the mounting is very flexible. High dynamic applications can be measured due to the measuring rate of 100 kHz.

Optical micrometers from Micro-Epsilon operate according to the transmitted light principle (ThruBeam micrometer). Here, the transmitter produces a parallel light curtain that is transmitted via a lens arrangement into the receiver unit. The beam is interrupted if an object is in the light path. The resulting shadowing is detected by the receiving optics and output as measurement value. Most optical micrometers are used for dimensional measurements in production, machine monitoring and quality assurance. Parameters such as diameter, gap, height and position are detected with high accuracy.

These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.

These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.

Motorized video microhardness tester with image processing motorized specimen stage 50 x 50 mm or 150 x 100 mm stroke

The modular concept provides flexible customized configurations. telecentric optical system easily exchangable objektives or turret (optional with Differential Interference Contrast - DIC) measuring stage with quick and fine-adjustment or motorized axes smooth-running coaxial coarse and fine focus drive stable steel cast stand stepless coaxial incident and transimitted light with glas fiber and cold light source high resolution digital video camera

Innovacera developed a series of ceramic accessories for Inside Micrometers, Holtest and Dial Bore Gages. The ceramic material used mostly is zirconia. The zirconia ceramic setting ring advantages: High wear resistance and long service life The coefficient of thermal expansion is very small, the effect of temperature is very small The hardness is very high, there is no need to worry about surface scars. Ring gauge management is simple (regular inspection interval is long, saving cost). The Zirconia Ceramic Ring Gauges Technology: Surface Roughness: Not more than Ra0.1um Straight Angle: 0.05/φ100 Parallelism: Not more than0.015mm Each 0.5mm as one size, from 1mm to 50mm. Some Zirconia Ceramic Ring Gauges Innovacera made and size detail: 9mm, 10mm, 18mm, 20mm, 24mm, 25mm, 28mm

This micrometer is used for measuring the height and the thickness of the seam.

Digital Outside Micrometer KINEX ABSOLUTE ZERO, 25-50 mm, 0,001mm, DIN 863, IP 65. Micrometers KINEX ABSOLUTE ZERO are supplied with a conversion measurement protocol. CODE L [mm] a [mm] 7030-05-025 0 - 25mm 33 25 7030-05-050 25 - 50mm 58 32,5 7030-05-075 50 - 75mm 83 47,5 7030-05-100 75 - 100mm 108 60

Digital Outside Micrometer KINEX ABSOLUTE ZERO, 0-25 mm, 0,001mm, DIN 863, IP 65. Micrometers KINEX ABSOLUTE ZERO are supplied with a conversion measurement protocol. CODE L [mm] a [mm] 7030-05-025 0 - 25mm 33 25 7030-05-050 25 - 50mm 58 32,5 7030-05-075 50 - 75mm 83 47,5 7030-05-100 75 - 100mm 108 60

Digital Outside Micrometer KINEX Labo ICONIC with Bluetooth 66-102mm, 0,001mm, DIN 863, IP67 Integrated wireless data transfer via Bluetooth (Bluetooth simple profile) Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected KINEX ICL Automatic wake-up by moving the measuring spindle (system S.I.S) Sleeping mode after 20 min. of no use (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system Quick displacement of the measuring spindle 12 mm / rotation Adjustable measuring force 5N / 10N (version 7030-27-030) Repeatability and reproducibility never reached before Measuring range 0-102 mm covered with 3 instruments only CODE A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] G [mm] 7030-27-030 0 - 30 mm 37,3 27,5 62 12,5 63 174 7,2 7030-27-066 30 - 66 mm 73,3 43 74 13,5 86 230 9 7030-27-102 66 - 102 mm 109,3 60 74 14,5 106 269 9 This product is replacement for model 7030-27-102, 7030-97-102...

Digital Outside Micrometer KINEX Labo ICONIC with Bluetooth 30-66mm, 0,001mm, DIN 863, IP67 Integrated wireless data transfer via Bluetooth (Bluetooth simple profile) Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected KINEX ICL Automatic wake-up by moving the measuring spindle (system S.I.S) Sleeping mode after 20 min. of no use (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system Quick displacement of the measuring spindle 12 mm / rotation Adjustable measuring force 5N / 10N (version 7030-27-030) Repeatability and reproducibility never reached before Measuring range 0-102 mm covered with 3 instruments only CODE A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] G [mm] 7030-27-030 0 - 30 mm 37,3 27,5 62 12,5 63 174 7,2 7030-27-066 30 - 66 mm 73,3 43 74 13,5 86 230 9 7030-27-102 66 - 102 mm 109,3 60 74 14,5 106 269 9 This product is replacement for model 7030-97-066 that is no...

Digital Outside Micrometer KINEX Labo ICONIC with Bluetooth 0-30mm, 0,001mm, DIN 863, IP67 Integrated wireless data transfer via Bluetooth (Bluetooth simple profile) Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected KINEX ICL Automatic wake-up by moving the measuring spindle (system S.I.S) Sleeping mode after 20 min. of no use (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system Quick displacement of the measuring spindle 12 mm / rotation Adjustable measuring force 5N / 10N (version 7030-27-030) Repeatability and reproducibility never reached before Measuring range 0-102 mm covered with 3 instruments only CODE A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] G [mm] 7030-27-030 0 - 30 mm 37,3 27,5 62 12,5 63 174 7,2 7030-27-066 30 - 66 mm 73,3 43 74 13,5 86 230 9 7030-27-102 66 - 102 mm 109,3 60 74 14,5 106 269 9 This product is replacement for model 7030-27-030, 7030-97-030 that...

Digital Outside Micrometer KINEX Labo ICONIC 30-66mm, 0,001mm, DIN 863, IP 67 Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected KINEX ICL Automatic wake-up by moving the measuring spindle (system S.I.S) Sleeping mode after 20 min. of no use (system S.I.S) Position memorized in sleeping mode (system S.I.S), absolute system Quick displacement of the measuring spindle 12 mm / rotation Adjustable measuring force 5N / 10N (version 7030-27-030) Repeatability and reproducibility never reached before Measuring range 0-102 mm covered with 3 instruments only CODE A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] G [mm] 7030-27-030 0 - 30 mm 37,3 27,5 62 12,5 63 174 7,2 7030-27-066 30 - 66 mm 73,3 43 74 13,5 86 230 9 7030-27-102 66 - 102 mm 109,3 60 74 14,5 106 269 9