Metal sleeves - Import export

Antonio Miró ball pen made in shiny metal, with brand logo on the barrel and available in a wide range of colors. With twist mechanism and in blue ink. Presented in an elegant and resistant black individual box with Antonio Miró logo and matching sleeve. Metal

Antonio Miró roller pen made of metal, with matte black barrel. Chrome plated fittings and cap with the brand's logo. Jumbo cartridge and blue ink. Presented in an elegant and resistant black individual box with Antonio Miró logo and matching sleeve. Jumbo Refill Metal

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.

Axial expansion joints compensate assembly tolerances and thermal longitudinal expansion in the direction of the tube axis. Depending on the design, they can be impinged with pressure internally and externally. Using a guide sleeve protects the metal bellows from abrasive media or flow-induced oscillations. The reaction forces caused by the internal pressure must be absorbed by sufficiently dimensioned anchor points.

Metallized Ceramic Componenets: Innovacera supplies precision metallized ceramic parts in aluminum oxide ceramics for the medical, and aerospace industries. Through spray, needle, and brush coatings or screen printing our capabilities allow us to metallized on flat, cylindrical, and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.In order to achieve the welding between ceramic and metal, the ceramic surface firmly adheres to a layer of the metal film, which is ceramic metallization.Refractory-metalized aluminum oxide ceramics widely use in power grid tubes, vacuum interrupters, and similar applications where metal to ceramic joints of exceptional strength and hermeticity is required. Specification >Metallization thickness: 25 ±10um >Nickel thickness:2~10um >Pin full strength: 4200kgf/cm2 avg. (at Φ3.0mm pin) Available Ceramic Composition >94%,96%,99%,99.

Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A6 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A6 landscape / 148 x 105 mm (W x H) • Suitable printable insert labels: Article number 485102

Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A5 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502

Extra strong, magnetic document sleeve for metal surfaces. With protective flap to prevent documents from getting dusty or damp. • Magnetic document sleeve with strong adhesive force through two heat-sealed neodymium strong magnets • Use on metallic surfaces, such as meshed containers, pipes and moveable transport containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502

Ming Xiao Mfg Custom Metal Bushings according to customer's design, the bushings made from Stainless Steel,Carbon Steel, Brass, Aluminum,ect. Bushing also called Sleeve, there is a saying bushing with thicker wall and sleeve with thiner wall. The bushing is a matching part used outside the mechanical parts to achieve the functions of sealing, wear protection, etc. It refers to the ring sleeve that functions as a gasket. In the field of valve applications, the bushing is ins The flexibility of the bushing is relatively high, and it can play a lot of roles. Generally speaking, the bushing is a kind of component that protects the equipment. The use of bushings can reduce equipment wear, vibration and noise, and has an anti-corrosion effect. The use of the bushing can also facilitate the maintenance of mechanical equipment and simplify the structure and manufacturing process of the equipment. We custom Metal Bushings for all industries, welcome contact us to develop your projects.

Ming Xiao Manufacturing Co., Ltd.is professional ISO9001 certificated Metal Parts Parts manufacturer, Located in China Ningbo,Specialize in Services of Sheet Metal Stamping,CNC Turning & Machining,Tube Bending, Cold forging & Hot Forging, and also can provide outsourcing services of laser cutting & Casting. We produce metal parts for various indstries,custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample,such as kinds of machined parts – metal shafts,steel rods, bushings, Sleeves, Flanges, tubes; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold forging parts,studs,bolts,screws,nuts,pins; steel wire forms and all kinds metal components. We provide a wide range of machining services, can satisfy the customer many types of products one-time order, for the customer to save a lot of trouble and costs for buy in different suppliers.

—Capacitive proximity switches for the detection of non-metallic and metallic objects —Smooth plastic sleeve —Diameter 20 mm, 34 mm —for counting, position queries of parts or products, for example in furnace technology, chemical industry or plastics processing — with additional PTFE sleeve suitable for level monitoring in tanks

The VA 40 variable area flowmeters are suitable for measuring liquids and gases The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly and observe the medium. The suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Institute in Essen.

Flowmeters especially for gases The VA 45 variable area flowmeters were designed to measure gases. They can be used, for example, in industrial ovens, forges and furnaces, and protective gas and heating systems. The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly.

▪ Compact and light-weight design for applications in which space is limited ▪ Available in 3 different sizes and covering all standard metric and imperial diameters between 4 mm and 32 mm / .16 inch and 1.26 inch ▪ Vibration/noise-reducing clamp body material with UV, ozone and weathering-resistant characteristics ▪ Advanced design with a film hinge allows the top part of the clamp body to open up and insert or replace the pipe, tube or hose without the use of force ▪ Embedded metal sleeve to ensure stability of the clamp assembly Please also ask for the Anti-Twist Feature to prevent turning of the components.

You can use this mesh sleeve to apply special adhesive when installing an anchorage device in a suspended ceiling or masonry with cavities. This metal mesh sleeve can be supplied with 3 different types of thread: M10, M16 and M22. Designed for suspended ceilings and masonry with cavities Available with 3 different types of thread: M10, M16 and M22

Quicky is a compact precast dowel made from a single piece. Assembling and disassembling parts is not required. Quicky is injection-moulded from high-quality branded HDPE plastic and is therefore cheaper than metal-plastic sleeves. The threadless sleeve allows for the anchoring screw to be turned in and out with an electric screwdriver in seconds. The days of risky unscrewing of threaded parts (breakage!) and cumbersome manual screwing of the anchoring screw into threads that are frequently soiled with cement paste are gone at last!