Metal ceramic heaters - Import export

(UDEN-S wall heaters are an excellent choice for autonomous or additional heating of any standard premises: apartments, houses, budgetary institutions or commercial real estate): ○ Metal-ceramic design heater UDEN-1000 (Energy-efficient metal-ceramic heaters UDEN-S are used to heat a variety of rooms: apartments, private homes, commercial real estate, and social spheres)

Metal-ceramic heater UDEN-900 (Energy-efficient metal-ceramic heaters UDEN-S are used to heat a variety of rooms: apartments, private homes, commercial real estate, and social spheres)

Metal-ceramic design heater UDEN-500К "Stefaniya"(Bright and unique design heaters of the “Image” series are a real exclusive, which has no analogues. Outwardly, they look like paintings, so they will become a stylish decoration of the heated room of its inhabitants with soft comfortable warmth)

Metal-ceramic design heater UDEN-300 "Lazurite" (Bright and unique design heaters of the “Image” series are a real exclusive, which has no analogues. Outwardly, they look like paintings, so they will become a stylish decoration of the heated room of its inhabitants with soft comfortable warmth)

Metal-ceramic heater UDEN-700 universal Remote Control (Energy-efficient metal-ceramic heaters UDEN-S are used to heat a variety of rooms: apartments, private homes, commercial real estate and social sphere)

Metal-ceramic warm plinth (The warm UDEN-S plinth is the metal-ceramic energy-saving heater for autonomous (individual) heating systems. Externally, they look like a regular plinth with a height of 13 cm, mounted mainly on the outer (usually cold) wall, around the perimeter of the room above the existing plinth, or instead.): ○ Metal-ceramic heater UDEN-250 (The warm UDEN-S plinth is the metal-ceramic energy-saving heater for the autonomous (individual) heating system. Externally, they look like a regular plinth with a height of 13 cm, mounted mainly on the outer (usually cold) wall, around the perimeter of the room above the existing plinth, or instead)

Metal-ceramic warm plinth of UDEN-200 (The warm UDEN-S plinth is the metal-ceramic energy-saving heater for the autonomous (individual) heating system. Externally, they look like a regular plinth with a height of 13 cm, mounted mainly on the outer (usually cold) wall, around the perimeter of the room above the existing plinth, or instead)

Metal-ceramic warm plinth of UDEN-150 (The warm UDEN-S plinth is the metal-ceramic energy-saving heater for the autonomous (individual) heating system. Externally, they look like a regular plinth with a height of 13 cm, mounted mainly on the outer (usually cold) wall, around the perimeter of the room above the existing plinth, or instead)

Metal-ceramic warm plinth of UDEN-100 (The warm UDEN-S plinth is the metal-ceramic energy-saving heater for the autonomous (individual) heating system. Externally, they look like a regular plinth with a height of 13 cm, mounted mainly on the outer (usually cold) wall, around the perimeter of the room above the existing plinth, or instead)

Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.

Product Specification Application: Mainly applied to the electronic soldering iron Voltage: 110VAC Heating Resistance: 37Ω±15% Dimension: L80*φ5.0mm Electrode: Welding 2 nickel wires on the surface

Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater for Automobile / Oxygen Sensor

Product Specification Application: Mainly applied to the electronic soldering iron Voltage: 110VAC Heating Resistance: 310Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 2 nickel wires on the surface

Product Specification Usage: Mainly applied to model 933 electronic soldering iron Voltage: 220VAC Heating Resistance: 140Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface

Product Specification: Application: Used for 936 soldering station Voltage: 24VAC Heating Resistance: 3.0±0.3Ω (23℃±2℃) Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface

Alumina Ceramic Heaters are produced by implementing unique metallization and ceramic lamination processes. Due to the advanced manufacturing techniques utilized in the electric element, Alumina Heaters can provide higher reliability than ever before. Currently, applications include use as innovative types of heaters in the automotive, medical and semiconductor industries.

Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater for Automobile / Oxygen Senser

In a development that could have a significant impact on the electronics industry, the latest ceramic metallized insulators are making strides in enhancing semiconductor packaging and related applications. These insulators offer a range of practical benefits that can improve the performance and durability of electronic components. Let’s take a closer look at what sets them apart: Key Features of Ceramic Metallized Insulators: 1. Stability and Strength: The ceramic material employed in these insulators boasts an even texture, ensuring every batch maintains stable quality and flexural strength. This consistency in material quality is pivotal for the reliability of electronic components. 2.Dense and Weldable Metal Layer: The metal layers in these insulators are densely applied, providing a smooth and even surface. This not only enhances their appearance but also makes them easy to work with, particularly in manufacturing processes.

DBC (Direct Bonded Copper) tenique denotes a special process in which the copper foil and the al2o3 or AlN (one or both sides) are directly bonded under appropriate high temperature. The finished super-thin DBC substrate has excellent electrical isolation,high thermal conductivity, fine solderability and high bonding strength.It may be structured just lick PCB to get etched wiring and has high curreng loading capability .Therefore DBC ceramic substrates have become the base material of tuture for both the construction and the interconnection techniques of high power semiconductor electronic circuits and also have been the basis for "chip on boaed" technology which repre-sents the packaging trend in century. Specification >Metallization thickness: 25 ±10um >Nickel thickness:2~10um >Pin full strength: 4200kgf/cm2 avg. (at Φ3.0mm pin)

High Hermeticity Metallized Ceramic Bushing /Innovacera Features: 1.Material: 96% Aluminia(AL2O3) 2.Coating Layer:Molybdenum-Mananese(Mo/Mn) 3.These metallized ceramics are ideal for high voltage, high vacuum and high pressure applicationos. So far the most widely-used and effective method for creating a leak-tight, robust joint between ceramic and metal is by brazing . A thin layer of metal deposited on a ceramic part enables brazing between ceramic and metal part that h as a different coefficient of thermal expansion. A layer of Molybdenum-Manganese is deposited with a typical thickness of 8 to 30 µm after sintering. The metallized surface receives a secondary coating of nickel to seal and improve wettability for later brazing.

Metallized Ceramic Componenets: Innovacera supplies precision metallized ceramic parts in aluminum oxide ceramics for the medical, and aerospace industries. Through spray, needle, and brush coatings or screen printing our capabilities allow us to metallized on flat, cylindrical, and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.In order to achieve the welding between ceramic and metal, the ceramic surface firmly adheres to a layer of the metal film, which is ceramic metallization.Refractory-metalized aluminum oxide ceramics widely use in power grid tubes, vacuum interrupters, and similar applications where metal to ceramic joints of exceptional strength and hermeticity is required. Specification >Metallization thickness: 25 ±10um >Nickel thickness:2~10um >Pin full strength: 4200kgf/cm2 avg. (at Φ3.0mm pin) Available Ceramic Composition >94%,96%,99%,99.

Metallized Ceramic Componenets: Innovacera supplies precision metallized ceramic ring in aluminum oxide ceramics for the military,medical, and aerospace industries. Through spray, needle, and brush coatings or screen printing our capabilities allow us to metallized on flat, cylindrical, and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.In order to achieve the welding between ceramic and metal, the ceramic surface firmly adheres to a layer of the metal film, which is ceramic metallization. Refractory-metalized aluminum oxide ceramics widely use in power grid tubes, vacuum interrupters, and similar applications where metal to ceramic joints of exceptional strength and hermeticity is required.

Ceramic-to-Metal Seal The Ceramic Surfaces for Brazing, the surface must be metallized. Compare to Glass seal, Ceramic seal has exceptional resistance to thermal and mechanical shock as well as corrosion. While it requires more complex manufacturing processes and sophisticated engineering, the price is obviously higher.

Mo Mn Ceramic Feedthrough Ceramic Vacuum Electrodes The Ceramic Surfaces for Brazing, the surface must be metallized. Compare to Glass seal, Ceramic seal has exceptional resistance to thermal and mechanical shock as well as corrosion. While it requires more complex manufacturing processes and sophisticated engineering, the price is obviously higher. Advantages of Ceramic-to-Metal Seals * More solid, durable hermetic seal and better electrical insulation * Used for more harsh conditions, such as high and low (cryogenic) temperature, corrosive, high pressure, and high vacuum environments * High mechanical strength, less fracture when applied to high vibration and high g-load conditions * Shows strong bond and an excellent seal with metals and alloys, such as copper and Cu alloys (CuNi) and to nickel and Ni alloys.

6 different power types. Compatible for factories, workshops, gyms, cafes, restaurant, chicken farms, indoor swimming pools, it can be used in all large-volume spaces such as hangars, meeting rooms and warehouses. It is remote controlled and modulated with 3 heat stages. Provide heat comfort and energy savings assists. 6 different thermal power values are produced in 2 different models, including L and U type. Using engineering, the preferred reflectors and angles allow heat to spread to the maximum area. Compatible with LPG,LNG and Natural Gas. Safe gas valve system is used in our devices

These heaters are also designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design with a cylinder shape. It can be operated by LPG, LNG and Natural Gas. It has an efficieny value that could make an intensive heat transfer. There is a safe gas valve system in all our products.

These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It transfers the heat intensively to needed spaces by the support of sheet metals around the seramic plates It can be operated by LPG, LNG and Natural Gas. It has a 72% efficieny value that could shorten payback time and supply customer satisfaction There is a safe gas valve system in all our products.

These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes . 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design covered by black glass that is translucent during heating process. It can be operated by LPG, LNG and Natural Gas. It has a 1200 temperature heat resistant glass that could make a intensive heat transfer. There is a safe gas valve system in all our products.

Gufo HG gas fired heater is designed as an economic heating solution to be used in the winter gardens of restaurants, cafes, hotels and offices, smoking areas and terraces. Impact, moisture and wind resistant stainless steel chassis. Resistant to 1100 degrees and thermal shocks, having 98% heat conduction and aesthetic ceramic glass. With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features 1. Step Power 7 kW 2. Step Power 12,5 kW Heating Area 25-50 m² Natural Gas Consumption 1,3 m³/saat Recommend Hanging Height 2,2 m Natural Gas Pressure 20 - 55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V