Medical suction - Import export

OB1000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB3000 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user.

The Medela Trolley is intended to be used throughout the hospital to hold up to 5 suction jars (PSU or PC with disposable liners). It is designed for indoor use. – Holds up to 5 suction jars/liners – Mobile with 5 castors (with brakes) – Dimensions: 85 x 60 x 60 cm

– Bacteria and virus filters provide the first, fundamental level of hygienic protection. A basic requirement if your system does not include an embedded filter. – Overflow filters offer an essential safety mechanism to prevent fluids from entering the pump or central vacuum system. Two redundant overflow mechanisms should be present in any aspiration system. – Odor membranes effectively trap gases and odors, especially useful in containers used over multiple hours.

OB500 medical suction unit equipped with autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles The device is designed for medical vehicles and is stationary, not portable Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP32d Functioning: 12÷15 Vdc Maintenance-free piston pump Vacuum control and regulation unit with ABS module Dimensions of suction unit: 175x175x100 mm Dimensions of ABS module adjustment unit: 90x130x85 mm Weight: max. 2 kg including mounting parts Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB MINI medical suction unit equipped with: 500 cc collection jar in autoclavable polycarbonate external mains-voltage EU power supply with 2-pole plug (mains power supply between 100 and 240 Vac) Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP43 Functioning/charge: 11÷30 Vdc Inorganic solid-type lithium polymer battery. Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user. The OB MINI suction unit is equipped with an internal microprocessor control that allows the storage of device construction and operating data. A special function alerts the user of the need for a scheduled device maintenance Dimensions: 290x240x95 mm Weight: 1.8 kg complete with accessories

OB1000 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB2012 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and two-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 350x240x120 mm Weight: 4.6 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB2012 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and two-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 350x240x120 mm Weight: 4.6 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB3000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user. The OB3000 suction unit is equipped with an internal microprocessor control that allows the storage of device construction and operating data.

Wall bracket anchorage for OB2012, OB3000 and OB1000 medical suction units Integrated device charging system Anchorage system tested to 10 g in accordance with the current EN 1789 standard Extremely compact and functional holder not protruding from the wall of the rescue vehicle, with quick release button 12Vdc power supply for OB2012 and OB1000; 11÷30Vdc for OB3000 Weight: about 0.8 kg Dimensions: about 240 x 255 x 5 mm

The Dominant Flex serves nearly every suctioning need in the hospital, clinic or doctor’s practice. It fulfills the requirements for cardiac surgery thanks to Cardiac Floating rating. The pump offers a strong alternative to wall vacuum, as the independent vacuum avoids overflow into wall systems and provides a smooth, consistent, and reliable vacuum level. The Dominant Flex offers flexibility, allowing the user to select a high, mid or low flow rate and thereby adjust the vacuum build-up time and sound level. • High-power flow rate of up to 60l / min while operating whisper-quiet at <40dB(A)* • Increased performance and faster suctioning by simply touching the 60l/min flow change button, activating the turbo mode for rapid vacuum build-up. • Superfast ramp-up: Our innovative Membrane Vacuum Regulator quickly builds suction strength, from 0 to -60 kPa in 4.6 seconds. Dominant Flex Surgical Suction Pump - Powerful & Reliable Suction *Data on file at Medela AG

The Medela RCS consists of autoclavable suction jars and lids with built-in overflow protection. All four jar sizes (one, two, three and five litres) have the same lid size to make handling easy and to reduce logistics. • Quick to connect components make the system ready to use in seconds. • No need to worry about overflow, thanks to built-in overflow protection. • Tubing is quickly connected, thanks to distinct vacuum and patient ports. • High grade, break resistant* polysulphone jars can be reprocessed over 500 times*. Medela RCS - STRAIGHTFORWARD AND LASTING * Study on record.

Vario 18 is an efficient medical suction pump. As an all-rounder for hospitals, clinics and home care, it offers quiet and reliable performance. • Swiss technology offers precision of vacuum level settings and reliability of performance. • The quiet QuatroFlex drive unit delivers superior power and durability. Efficient and so quiet that it can be used at the patient's bedside. • Portable and versatile thanks to a compact design and battery-powered option. • Hygienically designed pump and collection systems allow for efficient routine cleaning. • Intuitive handling and safety features require little instructions • 3 models available: o AC (plug in) o AC/DC (plug in & battery) o AC/DC c/i (plug in, battery, constant & intermittent) Vario 18 Portable Suction Pump - QUIET, RELIABLE PERFORMANCE

The ergo vac LT was developed as a low-cost version of the ergo vac series. The ergo vac LT electrode suction system helps medical personnel Quickly and Easily perform ECG measurements. Like the other series ergo vac, the ergo vac LT can be adapted to all types of ECG equipment and installed on a multitude of trolley systems.