Mechanical high temperature - Import export

glass cloth prepreg with high mechanical and chemical strength at high temperatures.

ALWA ALUMINIUM BLOCK (resin-based) is made for the thermoforming process (e.g., polystyrene, polycarbonate, acryl, etc.). ALWA ALUMINIUM-BLOCK (resin-based) is characterized by the following advantages: *Good mechanical finishing *High temperature resistance

• Acc. to DIN EN 61810-1, DIN EN 60664-1 • Clearance and creepage distances: contact - coil ≥ 8 mm • High dielectric strength ≥ 4 kV • High mechanical service life • High temperature range - 40 ... + 75°C • As option wash proof RT III

PEEK E-motors Insulation In response to the evolving landscape of higher voltage platforms reaching up to 800V and the integration of advanced SiC and GaN switching technologies, the demands placed on e-motor insulation have never been more exacting. Introducing our latest innovation: ARKPEEK polymer grades. Specifically engineered to address the stringent requirements of extrusion wire manufacturing processes, these advanced polymers deliver an unparalleled combination of exceptional electrical properties, robust mechanical strength, high-temperature resilience, and chemical resistance.

ISOVAL® 11 is prepared from glass fabric impregnated with the temperature resistant version of the ISOVAL® epoxy system. Laminates exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures.

ISOVAL® 11 HKB is prepared from glass fabric impregnated with a special tracking resistant epoxy resin. Laminates exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures.

• Acc. to DIN EN 61810-1, DIN EN 61810-3, DIN EN 50578 (UIC 736) • With forcibly guided contacts • High switching reliability due to crown contacts • Clearance and creepage distances: contact - coil ≥ 8 mm contact - contact ≥ 5.5 mm Double and reinforced insulation with pollution degree 2 Overvoltage category: III • High voltage resistance ≥ 4 kV • High mechanical service life • High temperature range: - 40 ... + 75°C • High continiuous thermal current Ith = 10 A

• According to DIN EN 61810-1, DIN EN 61810-3 • With forcibly guided contacts • High switching reliability due to crown contacts • Clearance and creepage distances: contact - coil ≥ 8 mm contact - contact ≥ 5.5 mm Double and reinforced insulation with pollution degree 2 Overvoltage category: III • High voltage resistance ≥ 4 kV • High mechanical service life • High temperature range at OA 5601 and OA 5602: -40 ... +85°C at OA 5603: -40 ... +75°C • High continiuous thermal current Ith = 10 A • High voltage range 0.7 ... 1.6 UN • As option wash proof RT III

• According to DIN EN 61810-1, DIN EN 61810-3 • With forcibly guided contacts • High switching reliability due to crown contacts • Clearance and creepage distances: contact - coil ≥ 8 mm contact - contact ≥ 5.5 mm Double and reinforced insulation with pollution degree 2 Overvoltage category: III • High voltage resistance ≥ 4 kV • High mechanical service life • High temperature range at OA 5601 and OA 5602: -40 ... +85°C at OA 5603: -40 ... +75°C • High continiuous thermal current Ith = 10 A • High voltage range 0.7 ... 1.6 UN • As option wash proof RT III

• According to DIN EN 61810-1, DIN EN 61810-3 • With forcibly guided contacts • High switching reliability due to crown contacts • Clearance and creepage distances: contact - coil ≥ 8 mm contact - contact ≥ 5.5 mm Double and reinforced insulation with pollution degree 2 Overvoltage category: III • High voltage resistance ≥ 4 kV • High mechanical service life • High temperature range at OA 5601 and OA 5602: -40 ... +85°C at OA 5603: -40 ... +75°C • High continiuous thermal current Ith = 10 A • High voltage range 0.7 ... 1.6 UN • As option wash proof RT III

ISOVAL® 11 HKB is prepared from glass fabric impregnated with a special tracking resistant epoxy resin. Laminates exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures.

ISOVAL® 11 is prepared from glass fabric impregnated with the temperature resistant version of the ISOVAL® epoxy system. Laminates exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures.

ISOVAL® R is prepared from glass rovings impregnated with the temperature resistant version of the ISOVAL® epoxy system. Laminates exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures.

ISOVAL® 11 is prepared from glass fabric impregnated with the temperature resistant version of the ISOVAL® epoxy system. Laminates exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures.

• According to DIN EN 61810-1, DIN EN 61810-3 • Clearance and creepage distances: contact - coil ≥ 8 mm, contact - contact ≥ 5.5 mm double and reinforced insulation between contact sets • Low rated power consumption • High mechanical service life • For high ambient temperature up to + 85°C • Compact size, small height • As option wash proof RT III

Housing steel. Viewing glass thermoplastic polyamide. O-ring and flat seal rubber (NBR). Reflector aluminium. Screw and hex nut steel. Version: Housing painted black. Transparent viewing glass, high mechanical stability, non-ageing, temperature resistant with oil up to 100 °C, with water up to 70 °C. Reflector painted white, markings and scale black. Screw and hexagon nut, electro zinc-plated. Note: The oil level gauges can either be fastened as shown in the illustration or directly in the threaded hole. Centre distance for the fastening holes = L1 ±0.5. The oil level gauges are suitable for tanks operating without pressure. Maximum operating temperature: 100 °C.

Custom PEEK machined parts are crafted to meet the unique demands of industries requiring high-precision and high-performance materials. PEEK's excellent properties, including its resistance to chemicals, high temperatures, and mechanical stress, make it a versatile material for complex applications. Whether used in semiconductor manufacturing, oil and gas exploration, or medical implants, PEEK components deliver reliable performance under extreme conditions.

Product Name:Aluminum Nitride Ceramic Substrate, AlN Ceramic Sheet Application:Often used in electrical and electronic fields requiring heat conduction, heat dissipation, insulation, high temperature resistance,high voltage breakdown resistance, high thermal conductivity, good stability. Product specifications: Conventional models are TO-220, 247, 264, 3P Range thickness: 0.25mm, 0.385mm, 0.5mm, 0.635mm, 0.8mm, 1mm, 1.5mm, 2mm, 3mm Product Advantages: Aluminum nitride ceramics have excellent thermal conductivity (7-10 times of alumina ceramics),low dielectric constant and dielectric loss, reliable insulation performance, excellent mechanical properties, non-toxic, high temperature resistance, chemical corrosion resistance, and the thermal expansion coefficient of silicon is similar, as a new generation of ceramic materials, more and more by people Attention and attention.

Stainless steel powder 409L/409CB is a ferritic, weldable grade of stainless steel with key performance features, including high compressibility, enhanced green strength and good sinterability. This stabilized grade provides excellent corrosion resistance and has the capacity to provide high-caliber mechanical properties due to the high temperature sintering response. 409L/409CB’s versatility also results from Cb being less prone to oxidation than Ti. In addition, the oxide is unable to combine with carbon and the Cb forms a stable carbide which prevents coarsening of carbides and grains in the weld’s HAZ. 409L/409CB Stainless steel is a prime candidate for automotive exhaust system applications, among other uses. 409LNI Powder has added nickel for new automotive specifications. Ferritic stainless steel powdered metallurgy (P/M) technology is specified for longer-term performance and reliability. Good atmospheric and saline corrosion

CBG-DP-90 is a dense, refractory, self-flowing concrete with low cement content intended for use in aggressive environments, including contact with molten metals and slags at temperatures up to 1,900°C, especially for the production of monolithic linings of steel ladles, elements of the metal tract and as a repair concrete mass. It can be used for monolithic linings as well as for products of any configuration and complexity. — high temperature resistance — high temperature of liquid phase formation — high mechanical strength — high temperature of onset of deformation under load — does not contain substances that cause allergic reactions — resistant to molten metal, acid and alkaline slags Main application: ferrous, non-ferrous and glass industry, lining of melting aggregates in the production of mineral fibres etc.

Various methods of assembly exist to bind ceramic to metal. When it comes to make an assembly that can resist to mechanical stresses and/or high temperatures, be vacuum leak tight and withstand corrosive environment, high temperature, braze sealing is essential. Applications Ceramic-to-metal brazed assemblies are particularly suited for use in airborne electronics for the aerospace, defense devices, medical and analytical instruments,high-energy physics, high vacuum equipment, the nuclear industry... We offer customized ceramic to metal brazed assemblies such as for instance : high-voltage feedthroughs for the mass spectrometry, hermetic packages for airborne electronics or sensors for the oil industry, high-voltage hermetic connectors for the nuclear industry, high-voltage insulators for electron tubes.

Introducing the MVHHT Series: High-temperature filters built to withstand the heat. Crafted with micro glass fiber media and separator, available in stainless steel or galvanized steel frames. Resilient up to 250 degrees, these filters are essential for air conditioning systems and industrial processes. "

Our High Temperature Tapes are perfect for all kinds of masking uses during processes which regularly use a lot of heat, examples of these processes includes Powder Coating where powder is sprayed on as a coating before being baked on to an application for a permanent finish. Coming in a huge number of variations including Ultra high temperature & Low tack adhesives, you can rest assured that we have the best choice for you. As mainly film based products, these High Temperature Tapes are malleable and flexible meaning that they can be used for tricky areas where there are many sharp corners.Discs are also available which can be used to seal off and prevent small holes such as screw holes from becoming filled during the coating process. For our full selection of Powder Coating Tapes / High Temperature Tapes please visit our website using the link below. Free sample lengths are available on all our tapes meaning you can try before you buy.

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and solid parts or structural elements that can be used at temperatures up to 1.400 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% biosoluble — high temperature resistance — low thermal conductivity — high chemical resistance * — low weight — good tear resistance — high flexibility — easy processing — complicated geometries can be produced — recyclable * to achieve higher acid resistance, a special coating is required. Available from manufacturer. Application: Burner plant components, crucibles, thermocouple housings, coupling devices in continuous casting plants, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals, gasket in aluminium foundries, gaskets in blast furnaces, expansion joints, pipe insulation, catalyst insulation, repair work in the high temperature range.

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and strong parts or structural elements that can be used at temperatures up to 1 .600 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% natural — biosoluble — high thermal shock resistance — low thermal conductivity — high chemical resistance * — recyclable — low weight — good tear resistance — high flexibility — easy processing — harmless to health — complicated geometries can be produced * A special coating is required to achieve high acid resistance. Available from manufacturer. Fields of application: gaskets, crucibles, thermocouple housings, coupling devices in continuous casting plants, expansion joints, convex and flat gaskets in blast furnaces, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals.