Results for
PAWONEX
Poland
Tatiana is a representative of the warmest winter hats in our offer. Winter hats made of thick and natural yarn are very liked and appreciated by our clients. This model is characterized by decorative stitching and a large pompom in the same color as the rest of the hat. The lower part of the hat is finished with an elastic band, making it easy to adjust to any head size. The fashionable pattern of the winter hat as well as a large selection of colors make it one of the favorite hats for the coldest frosts and fun in the snow. A decorative plate with the manufacturer's logo adds elegance to this model. What should a good winter hat be like ? The answer to this question is simple. Such a hat must be warm and breathable. Its design and size must not restrict movement, and the materials used in production must not cause skin irritation. All these conditions are met by women's hats sewn in our company.
Request for a quoteIGUS® GMBH
Germany
iglidur® Q: Fit for high load iglidur® Q is the low priced solution for high holding times at high to extreme loads. Bearing made from this material suits all types of movements, but is used preferentially in oscillating motions. iglidur® Q is available as cylindrical bearings, plain bearings with flange and thrust washers. Excellent abrasion resistance, especially with high loads suitable for extreme pv-values Good coefficients of friction Insensitive to dirt
Request for a quoteKEBA FASTENINGS
Germany
is a special fastener designed for reliability and an easy direct assembly into thermoplastics. Enhancement when compared with Polymate30: The re-designed geometrical flank allows for optimized movement of plastic material while initiating the fastening procedure. Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. At the same nominal diameter, up to 50% gain in torsional and tensile strength. As there is a larger core and reduction in the thread pitch length, shorter fasterners and/or smaller diameters may be used. Improved pitch provides added vibrational safety. SOMETIMES SMALLER IS BETTER The visuals below show the advantages of a reduced fastener length and diameter by comparing Polymate30 to Polymate20. Substitute A provides a reduction in length, whereas Substitute B provides a reduction in diameter. For both scenarios, the reduction in pitch from the Polymate20 provides a maintainted thread flank.
Request for a quoteKEBA FASTENINGS
Germany
FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.
Request for a quoteENVEA
France
Microwave sensor for contactless monitoring of material flow and detection of material blockage. The FlowJam is a processsecure device, since the microwave technology used can penetrate material coating on the sensor and reliably detect the material movement behind it. • detection of material blockage and material standstill • insensitive against material deposits • for any line diameter • compact (no separate electronics) • with ceramic mounting, usable up to 1,000 °C
Request for a quotePRESSTA EISELE GMBH
Germany
High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width Rest-piece length as short as 55 mm (depending on profile) Machine can use carbide (TCT) or PKD blades diameter 650 mm (smaller diameter upon request) Automatic kerf widening to reduce scratches Individually controllable clamping pressure Motorized material feed with servo driven ball screw Pneumatic material clamps individually adjustable Positioning of the vertical and horizontal clamps by hand-wheel Cut off lengths of up to 5000 mm are possible by reversing the material feed up to 5 times Floating material feed to reduce material abrasion Feeder length of 1000 mm Simple exchange of saw blade, accessible from the front Saw blade feed is...
Request for a quoteTOMECH SOLUTIONS
Romania
Bulk handling equipment encompasses a diverse range of machinery and systems designed to efficiently transport, store, and handle large quantities of bulk materials such as ores, minerals, grains, chemicals, and aggregates. These equipment play a vital role in industries such as mining, agriculture, construction, and manufacturing, facilitating the movement of materials along various stages of the supply chain. We specialize in the design, engineering, and integration of bulk handling equipment, offering customized solutions to optimize material handling efficiency, minimize downtime, and enhance overall operational performance for our clients across various industries.
Request for a quoteKMC GLOBAL EUROPE SP. Z O. O.
Poland
Move hot, dry or wet abrasive metal scrap or finished parts with an oscillating scrap conveyor. Vibrating scrap handling systems are ideal for moving hot, dry or wet abrasive metal chips, die scrap, or finished parts across horizontal distances at roughly 12.5 feet per minute. Low cost, economical choice for small to large size shops. Built for machine-side or in-pit operation. This oscillating scrap conveyor is the top choice for transferring hot, dry or wet abrasive metal scrap, chip processing or moving finished parts across horizontal distances. This scrap handling system provides a steady movement of material at roughly 12 1/2′(3.81 meters) per minute.
Request for a quoteGABELLA MACCHINE SPA
Italy
Each line is carefully designed on the customers indications, starting from a general structure that is as follows: Coil car, motorized and with hydraulic lifting Decoiler, designed on demand and with the required capacity (up to 30 ton) Straightening group with one of the different precision straighteners or levellers we can propose. We have in our range also “cassette-system” levellers, for the quick exchange of the working rolls. They are particularly useful for those who have a big range of materials and thicknesses. Guillotine shear (start-stop or non-stop models) or flying shear. This last one allows the flying cut of the sheet-metal, without stopping or slowing down the passage of the material. The shear moves synchronized with the metal strip. The control equipment checks the material movement and automatically decides, according to the speed, to move the car that holds the shear.
Request for a quoteTRBA
Belgium
During the project study phase, our technical teams can help you optimise material movements. Thanks to our very own stabilisation workshops, we can apply lime, cement or any other hydraulic binder for you to reuse your excess spoil as backfill, sub-foundation or foundation material. The dosage of the binder is determined in advance by our laboratory so as to make the project as cost-effective and environmentally friendly as possible
Request for a quoteWIRE BELT COMPANY OSTERLOH GMBH
Germany
Discover German engineering at its best with our drive components for conveyor belts. Manufactured from high-quality materials, they guarantee efficient and reliable material movement. Wire Belt offers you guaranteed precision-manufactured sprockets, drive shafts and pulleys. Each component is carefully manufactured in Germany to fulfil the highest quality standards. The durability of our drive components reduces follow-up costs and ensures smooth production processes. Our employees are on hand to advise you throughout the life cycle of every project. Based on your needs, you will receive the best recommendation for the respective material requirements in combination with the motor and the conveyor belts. High standards are essential, especially in the food industry. With Wire Belt you will find the right partner.
Request for a quoteLOOMKNITS (IE NOVIKOV D.V)
Russia
Comfortable shorts with soft elastic and pockets. comfortable cut does not hinder movement natural material. The fabric is very delicate and soft, breathes and less wrinkles due to viscose in the composition pockets for treasures together with a shirt and panama, you get a stylish set for the summer natural color harmoniously combines with other colors of loom knits products
Request for a quoteLOOMKNITS (IE NOVIKOV D.V)
Russia
Comfortable shorts with soft elastic and pockets. comfortable cut does not hinder movement natural material. The fabric is very delicate and soft, breathes and less wrinkles due to viscose in the composition pockets for treasures together with a shirt and panama, you get a stylish set for the summer natural color harmoniously combines with other colors of loom knits products
Request for a quoteBOSCARO SRL
Italy
Designed for the transportation and placement of concrete road barriers with an automatic load and release mechanism for quick and easy material movement. Capacity 5000 Kg Adjustment 50-800 mm Wide opening width allows usage with large kerbs and barriers. Easily adjusted by means of a locating pin and steel jaws on demand for slippery barriers
Request for a quoteZINNER GMBH PRÄZISIONSWERKZEUGE
Germany
Technical information Axial grooving is among the most technically difficult machining process in the whole field of metal removal. In this process the chip, once removed, must overcome not just the shaping of the material but also the circular movement. It is particularly important that the machining should always commence at the outer diameter of the axial groove as tool stability is in direct proportion to the diameter. It is preferable for the tool to be used underneath the work-piece so that the chips can fall downwards without obstruction. Tool systems The S System is a modular tool system which offers innumerable possibilities to the user. The cutting tips for this system are ground to a sharp edge and produce an excellent surface quality. It goes without saying that the cutting tips can be supplied with all required corner radii. The RC System is screw clamped; the cutting tip is securely clamped into position so that it cannot fall out. When rough turning, grooving depths of up to 100 mm are standard. When turning larger diameters we are also able to achieve grooving depths of 150 mm.
Request for a quoteALWAYSE ENGINEERING LIMITED
United Kingdom
With low capital costs and virtually maintenance free, Gravity Rollers offer a cost effective alternative for hundreds of applications including the movement of materials, goods or packages. Rollers can be manufactured to your own specification, please contact our experts to discuss your individual requirements.
Request for a quoteVCSP LTD
United Kingdom
The VCSP Electromagnetic Drive delivers optimal performance and efficiency to vibratory conveyors. With precision control, superior efficiency, and reliable durability, it enhances material handling operations using vibratory conveyors. Key Features: Precision Control: Customizable speed and amplitude adjustments ensure smooth and efficient movement of materials. Superior Efficiency: Advanced electromagnetic technology minimizes power consumption for cost savings and environmental benefits. Reliable and Durable: Built with high-quality materials, it guarantees exceptional reliability and longevity. Easy Integration: Seamless installation and user-friendly interface for effortless control and operation. Customizable Solutions: Tailored electromagnetic drives to meet unique material handling requirements. Experience the cutting-edge VCSP Electromagnetic Drive to enhance vibratory conveyors. Contact us for efficient, reliable, and cost-effective vibratory conveyors
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Materials movement - Import exportNumber of results
17 ProductsCountries
Category