Material hoist - Import export

The permanent installed material hoist GEDA 1200 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The GEDA VARIO-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 1500 kg and a lifting height of 9 m/min, the GEDA 1200 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.

The permanent installed material hoist GEDA 850 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The well-know GEDA UNI-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 850 kg and a lifting height of 9 m/min, the GEDA 850 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.

The GEDA 300 Z with its lightweight 2 m aluminum mast segments has been used on building sites for various kinds of transport for many years. Its spacious load platform makes it the ideal rental unit for permanent use on building sites. In order to meet your demands on site, you can choose between 230V or 400V power supply for the GEDA 300 Z.

Powerful and efficient—at low and great lifting heights: The GEDA 500 Z F combines the advantages of a compact material hoist with the flexible operation possibilities of a free-standing construction hoist. The convenient move-through platform and the ability to operate without anchors up to heights of 9.5 m allow the GEDA 500 Z F to be optimally adjusted to the conditions on the respective construction site.

When repairing and maintaining silos, blast furnaces, co-generation plants and boilers etc, every minute and centimetre of space counts, since access is only possible through the small manhole only 45 cm in diameter. So this is precisely where the materials hoist, the GEDA 300 Z Boiler Hoist, should be deployed. The platform of the pure materials hoist can be accessed for loading/unloading and personnel may also travel in the hoist for assembling/dismantling the device. The GEDA 300 Z Boiler Hoist can be completely dismantled into its individual parts and is also popular with customers since it can be assembled and dismantled quickly by two people in only about 40 minutes. In this regard its rack and pinion design has proven its worth as the GEDA 300 Z Boiler Hoist can be assembled significantly more quickly than wire rope hoists. All connection cords are fitted with plug and socket devices to ensure that assembly is easy and fast.

These rack and pinion hoists with steel segment masts have earned their good reputation over the years being a reliable partner for construction workers. Their spacious load platforms offer enough space for two wheelbarrows or large pallets as well as fixing devices for bulky construction materials. The steel mast system allows for easy assembly from the platform up to a height of 100m. Safe unloading of the transported materials is granted by the platform's being able to be turned by 90°. Loading at the base unit is carried out parallel to the building. This can be very space saving and a decisive feature on narrow construction sites! A patented mono-axis trailer for transporting and automatically putting down/ loading the hoist is offered as accessory.

The small, lightweight and handy GEDA 200 Z – our ideal hoist for scaffolders and construction workers. The base unit includes chassis, cable bin and trailing cable. The mast with the toothed rack can be fixed to the scaffold using only one tube. The anchoring distances are 4m. The entire unit only requires an area of 1,5 x 1,5m on the ground, which makes it possible to load the hoist parallel to the building without any problems. Unloading at the landing levels can be easily done by turning the platform. The lightweight platform (only 44 kg) can be turned by 90° to the left and to the right. The GEDA design and development team has constructed the GEDA 200 Z to be easily serviced and maintained, i.e.easy access to handy components.

These rack and pinion hoists with steel segment masts have earned their good reputation over the years being a reliable partner for construction workers. Their spacious load platforms offer enough space for two wheelbarrows or large pallets as well as fixing devices for bulky construction materials. The steel mast system allows for easy assembly from the platform up to a height of 100 m. Safe unloading of the transported materials is granted by the platform's being able to be turned by 90°. Loading at the base unit is carried out parallel to the building. This can be very space saving and a decisive feature on narrow construction sites! A patented mono-axis trailer for transporting and automatically putting down/ loading the hoist is offered as accessory. The GEDA 500 Z Duo is available with load-through and rotable platform.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

Wherever heavy loads have to be transported to great heights, the new GEDA BL 2000 P ensures the required efficiency in the industry. With a load capacity of 2000 kg or 23 persons and a max. lifting speed of 40 m/min, this permanent passenger and material hoist is the new powerhouse from GEDA. The fixed platform size of 3.20 x 1.45 x 2.10 m also allows transport of bulky goods up to a height of 250 m. For added comfort and operating convenience, the hoist is equipped with comprehensive state-of-the-art control variants. The GEDA BL 2000 P is perfectly tailored to the requirements in rough industrial environments. Maintenance and repair work can be conducted efficiently with the permanent passenger and material hoist.

The personnel and material hoist GEDA Multilift P12 P is an alternative to the classical service- and industrial hoists. It is designed to meet the requirements of the industry. Using the GEDA Multilift P12 P with its single mast, you can transport a maximum of 12 people or 1500 kg. The main features of this hoist are: — enclosed car — completely closed base enclosure — control can be carried out from all loading/ unloading points, from the car and from the base enclosure. A level pre-selection control can be installed as an accessory which enables automatic drive to landing levels.

The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.

The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened.Assembly is not carried out from the roof.

The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.

New concepts for new markets is the banner under which the Bavarian construction and industrial hoist manufacturer GEDA-Dechentreiter GmbH & Co. KG presented a new personnel and material hoist, especially for markets outside Europe: The new GEDA SBL 2000. In contrast with other, variably adjustable hoist solutions from GEDA, the new GEDA SBL 2000 is therefore only available in a fixed platform size of 3.20 x 1.45 x 2.10 m, a standard load capacity of 2000 kg and 23 people, as well as a hoist speed of 55 m/min and a discharge head of 250 m. The title “Made in Germany” also stands for quality outside Europe. According to GEDA Managing Director Johann Sailer, it is important to stress in this context that with the GEDA SBL 2000 a product optimally tailored to meet the needs of target markets outside European has been developed and manufactured entirely in Germany. The GEDA SBL 2000 is available both as a single and a twin cabin.

The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.

The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.

The GEDA 2 PK is a rack and pinion hoist with aluminium ladder segments. Its flexible system allows for the hoist to be installed to any kind of crane up to a standard height of 150 m (higher heights on request). This makes it a safe and quick transport system for crane conductors and maintenance personnel and materials. Its overspeed safety brake guarantees safe transport. Electrical safety devices prevent faulty operation. You can control the hoist from the control board in the car. (option: control to be changed to the outside or to the car). When the car is opened, a small ramp with lateral protection will open, too, forming a safe transition to the car together with the access enclosure. In order to put on the mast segments, the roof has to be opened. The lightweight ladder segments can be easily installed in a safe way. These are connected without bolts, with the help of a patented quick lock system.

GEDA industrial elevators guarantee the smooth, efficient and safe transportation of people and materials precisely where they are required. Even in the toughest of conditions, GEDA products score highly with customers due to their unique quality and modern car design. The versatile deployment sites of GEDA industrial elevators cover cement works, asphalt mixing plants, chemical plants through cooling towers and silos to offshore plants and explosion-protected areas. Industrial elevators create huge time and cost savings due to efficient workflows in maintenance and service work. The GEDA Standard elevator range covers load capacities from 400 to 3,200 kg. The modular design also provides the customer with the choice of different car dimensions and hoisting speeds of up to 60 m/min. Whatever demands an elevator must meet every GEDA industrial elevator, whether a transport platform or personnel and material hoist or pure material hoist, can be perfectly adapted to on-site conditions.

The transport platform GEDA 1500 Z/ZP unites two different machines in one: a hoist for materials with a load bearing capacity of 2000 kg and a transport platform for material and persons. In contrast to ordinary material hoists, for which the transport of people is strictly prohibited, the GEDA 1500 Z/ZP may transport 7 people in addition to goods as soon as it has been switched to the operating mode “transport platform“. Just as for all other GEDA twin mast transport platforms, you can choose between a lot of different transport platforms and as many different types of roofs. The load platforms provide enough space for bulky and heavy building materials. This can help to improve logistics on site. In order to prevent people from falling down, hot-dip galvanized landing level safety gates with mechanically locked sliding doors are installed to all loading and unloading points.

The GEDA 2500 Z/ZP transport platform is the new powerhouse from GEDA. Thanks to the innovative GEDA SVARIO-MAST system, the transport platform is guided on only one mast and has a load capacity of 2500 kg. This makes it easy to transport heavy construction materials to their place of use up to a height of 200 m. The comfortable and large platform with dimensions of 1.45 m x 3.55 m can transport construction materials and up to 7 passengers quickly and safely. The extremely high platform (2.60 m) makes transporting bulky goods easy. For loading the platform on a lorry, the roof can simply be lowered to 2.10 m. With two separate controls, the GEDA 2500 Z/ZP can be used simply as a material hoist with a lifting speed of 40 m/min or as a transport platform for passengers and materials with a lifting speed of 12 m/min. The GEDA 2500 Z/ZP expands the versatile transport platform range and offers another solution for the individual conditions at your construction site.

With just one touch of a button all kinds of materials are easily transported along the façade, without that tiresome cable spaghetti, leading to faster, smoother construction. The GEDA BatteryLadderLIFT is THE new kid on the block in compact material hoists. Assembled in a flash by only one person in less than five minutes, the new lift from GEDA uses its powerful 24 V/10 Ah li-ion-battery and different load carrying devices to drive to transport all kinds of materials up to 120 kg. So with just one touch of a button the practical remote radio control sets the compact device in motion from 0 to 15 m/min. Whether the project is a restoration or a new build site, whether for tilers, decorators, window producers, joiners, removal companies, DIY enthusiasts and and and… the GEDA BatteryLadderLIFT is the ideal transportation tool for all those materials that have to be transported upwards quickly and safely. It can be used in virtually every situation.

Mobile motorized traction sheve hoist for any lifting height, flexible and economic assembly and installation work. Simple operation for working safely at heights. Gsmartrac is a material rope traction hoist which drives a sheathed rope without rolling it up. This means any height can be reached. Electronic motor protection prevents overloaded lifting operations, giving your hoist long lasting service life with low wear. Please contact us for further information or technical details!

Alimak transport platforms are optimised to create efficient vertical access on construction sites. Featuring a robust modular design, the Alimak TPL range transcends the capabilities of traditional material hoists offering additional functionality and high performance in restricted spaces. The Alimak TPL range can be utilised on smaller construction projects to transport loads of up to 2,000 kg rapidly to elevated points on-site for greater productivity.

Alimak transport platforms are optimised to create efficient vertical access on construction sites. Featuring a robust modular design, the Alimak TPL range transcends the capabilities of traditional material hoists offering additional functionality and high performance in restricted spaces. The Alimak TPL range can be utilised on smaller construction projects to transport loads of up to 2,000 kg rapidly to elevated points on-site for greater productivity.