Wheat flour mill - Import export

It is used for peeling the shells of wheat, barley, rye and similar grains and for cleaning dust, sand, small seeds, husks, insects and foreign matter stuck on these grains. The grain is cleaned and peeled by means of self-friction with an intense pressure, rubbing against steel metal anchors placed on the rotor, and rubbing against the knitted fabric of a special material that is rolled out cylindrically on the braided liner suitable for abrasion. The dusts are directed out of the pores of the shirt to the dust chamber and to the outlet through the bunker. Wheat, on the other hand, is taken out by directing it to the outlet in the jacket with the angle of the anchors. Application Fields In flour and semolina factories, Cleaning facilities of wheat, rye, barley, corn and similar grains, Used in grain storage silos. The machine is driven by a belt-pulley mechanism and can be used with any air duct or a tarar.

It is used for separating garbage, straw, ear, other coarse and small foreign matter from wheat and other whole grains. In the food industry; In flour and semolina factories, seed cleaning facilities, grain cleaning and calibration facilities, grain factories, feed mills, silo facilities. In other similar industrial facilities; Low power consumption, high efficiency and high capacity Easy and minimum maintenance, trouble-free operation thanks to vibro-motor drive, Possibility to reach maximum capacity and efficiency for various grains with adjustable sieve angle, Durability and longevity Quick and easy replacement of sieves, practical cleaning possibility Quiet working

The control sieve is used for the final control before packaging in the packaging unit of the flour factories. The product arriving at each passage of the square screen enters through the pressure pipe and moves vertically and horizontally through the pre-set flow paths along the passage. The final checks are made after the flour sifting process. The flour, whose last checks are made, is directed to the bagging process. Apart from flour and semolina factories, it is used in processing plants of wheat, corn and similar grains, in feed mills, in various food products processing plants for the final screening of mixed feeds and for the sifting of large-grain corn, crushed pellet feed, barley, oats and similar processes. Application Fields ◾ At flour mills: For wheat, corn and similar grain processing plants ◾ At feed mills: For final sifting of formulated feed meals, corn, crushed pellet feed, barley, oats and for removing the remained coarse materials after grinding and similar processe

The horizontal scourer is used before tempering to damage the husk to increase the water absorption of the wheat and it is used after tempering to remove the husk completely. It consists of a steel rotor placed inside a wire drum. The high-speed rotor rubs the wheat onto the rotor, to other wheat grains and the wire drum for the removal of the husk.

Wholegrain wheat flour is obtained by milling the grains together with the shell. The preserved shell contains lots of vitamins and minerals, which makes this flour much healthier than ordinary white flour. Wholegrain flour can be used as a replacement of the ordinary wheat flour in almost any recipe. Milling with stones allows us to preserve the natural balanced composition of grains, which makes it possible to lower a glycemic index an important indicator for those who care about their health.

Oat flour is a good choice for baking. The most popular dishes are oatmeal cookies and pancakes. Nutritionists believe that oats are healthier than other grains. When oat flour is added to bakery products, they become more fluffy and crumbly, so this flour can serve as a substitute for wheat flour. Milling with stones allows us to preserve the natural balanced composition of grains, which makes it possible to lower a glycemic index an important indicator for those who care about their health.

Oat flour is a good choice for baking. The most popular dishes are oatmeal cookies and pancakes. Nutritionists believe that oats are healthier than other grains. When oat flour is added to bakery products, they become more fluffy and crumbly, so this flour can serve as a substitute for wheat flour. Milling with stones allows us to preserve the natural balanced composition of grains, which makes it possible to lower a glycemic index an important indicator for those who care about their health.

You can have a healthy diet by grinding traditional and cultural whole wheat flour with the stone mill machine system. You can obtain quality flour by using completely new generation machines in the stone mill wheat milling system. Machines such as pneumatic system sieve filter blower used in the stone mill wheat milling system are used. In this way, the flour quality has been increased. The machine is very easy to setup and use. It is aimed to increase the quality of flour and bread by removing bran between 10 / 11% from the flour after the conversion to wheat flour milled in the stone mill system. All areas in contact with the stone milling machine product have been made more hygienic and healthier by using 304 quality stainless steel.

You can have a healthy diet by grinding traditional and cultural whole wheat flour with the stone mill machine system. You can obtain quality flour by using completely new generation machines in the stone mill wheat milling system. Machines such as pneumatic system sieve filter blower used in the stone mill wheat milling system are used. In this way, the flour quality has been increased. The machine is very easy to setup and use. It is aimed to increase the quality of flour and bread by removing bran between 10 / 11% from the flour after the conversion to wheat flour milled in the stone mill system. All areas in contact with the stone milling machine product have been made more hygienic and healthier by using 304 quality stainless steel. BTD 1200 stone mill Stone mill technical specifications Stone Ø 1200 mm Drive s

You can have a healthy diet by grinding traditional and cultural whole wheat flour with the stone mill machine system. You can obtain quality flour by using completely new generation machines in the stone mill wheat milling system. Machines such as pneumatic system sieve filter blower used in the stone mill wheat milling system are used. In this way, the flour quality has been increased. The machine is very easy to setup and use. It is aimed to increase the quality of flour and bread by removing bran between 10 / 11% from the flour after the conversion to wheat flour milled in the stone mill system. All areas in contact with the stone milling machine product have been made more hygienic and healthier by using 304 quality stainless steel.

You can have a healthy diet by grinding traditional and cultural whole wheat flour with the stone mill machine system. You can obtain quality flour by using completely new generation machines in the stone mill wheat milling system. Machines such as pneumatic system sieve filter blower used in the stone mill wheat milling system are used. In this way, the flour quality has been increased. The machine is very easy to setup and use. It is aimed to increase the quality of flour and bread by removing bran between 10 / 11% from the flour after the conversion to wheat flour milled in the stone mill system. All areas in contact with the stone milling machine product have been made more hygienic and healthier by using 304 quality stainless steel. BTD 1200 stone mill Stone mill technical specifications Stone Ø 1200 mm Drive s

You can have a healthy diet by grinding traditional and cultural whole wheat flour with the stone mill machine system. You can obtain quality flour by using completely new generation machines in the stone mill wheat milling system. Machines such as pneumatic system sieve filter blower used in the stone mill wheat milling system are used. In this way, the flour quality has been increased. The machine is very easy to setup and use. It is aimed to increase the quality of flour and bread by removing bran between 10 / 11% from the flour after the conversion to wheat flour milled in the stone mill system. All areas in contact with the stone milling machine product have been made more hygienic and healthier by using 304 quality stainless steel. BTD 1200 stone mill Stone mill technical specifications Stone Ø 1200 mm Drive s Stone Mıll Wheat Grındıng Machıne

Cleaning unit includes many different types of cleaning machines with different functions. They include like garbage separator, stone separator, air channel, for more information you can refer to our website link provided with this item. http://www.millteknoloji.com/urunler/44-temizleme-unitesi/

◾ Fully PLC controlled. ◾ Precision weighing and long life with stainless steel load cells. ◾ 5/10kg.-10/25kg.and 25/50kg. weighing December. ◾ Automatic filling into bags with an open mouth. ◾ Lower and upper tolerance values that can be programmed separately. ◾ Automatic sack shaking mechanics. ◾ Separate weighing container feeding system according to the type of product to be bagged. ◾ Double coil feeding driven by separate motor. ◾ Single coil feeding driven by two-speed motor. ◾ Belt feed driven by two-speed motor. ◾ According to the product to be bagged and the desired tolerance, 13-22 tons/hour (50 kg. capacity Decoupled in bags) between. ◾ Special system panel from IP54 protection class ◾ Regulation bunker weighing unit and special vibration units in unloading bunkers. ◾ Easy calibration with keypad. ◾ Height adjustable sewing machine column.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls.

This machine provides the sorting of crushed corn with speed adjustment. It makes density and size classification with vibramotor from sheets of different sizes. It separates the sticky products (bran, flour, corn...) that can be obtained from corn with the help of vacuum.

Steel Structure

It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. FEATURES - MFDJ It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. - MFNM - Best machine in practice. - Most economic spare parts. - Long life. - Seperation of fat with intensive operation. - Nindamac helps to achive high aqualit diffrent granulation of finished product with low fat content. For high technology degermination done by Nindamac by the

It is used for cleaning and classifying semolina in flour and semolina factories. The product, whose flow rate can be adjusted, is evenly distributed over the entire screen surface by means of a curtain. Screening process is carried out with 2 or 3 layers of telero. With the aerodynamic air channel and adjustment valves, an equal vacuum is created on the whole screen surface, the products with extended adhesion surface such as bran and bran are separated from the product by vacuuming and pushed into the outlet channel. The product (semolina) free from bran is classified according to its grain size by means of sieves. Application Field ◾ At food industry ◾ Flour mills ◾ Semolina mills

The cylindrical body structure is produced in a structure suitable for the product flow in one or both sides, depending on the project conditions, with supporting legs suitable for connecting to the floor deck or floor. The vibro feeding system connected to the conical structure has an adjustable flow flap and is driven by a vibromotor. In flour factories, it is used in the parts that require the adjustment of the ground grains at the appropriate flow and simple feeding, generally in the parts where the filter outlets need to feed a pneumatic line or a machine and where the dust wastes are brought into the system with pneumatics.

It performs the dissolving and grinding process in the appropriate semolina passages of flour diagrams, in this passage it increases the flour yield at high rates. This process is carried out with lower energy than other grinders. These machines are used in coarse and fine semolina passages, It can be mounted right after the rolls or on the upper turning points of the pneumatic carrier pipes to be used as elbows. Application Fields ◾ Flour Mills ◾ Semolina Mills

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

This machine is used in flour mills to separate the stuck core particles in the product coming from the roll. In this way, in flour production; Soft separation does not spoil the product. Both floor and ceiling hanging position shape, Right and left directions of spinner bars, Low power requirement, Coupling or pulley connection system Application Fields ◾ At flour mills ◾ At coarse and fine semolina passages ◾ After roller mills or before plansifter inlet

The Conveyor used in grain, creals and food processing plants in the transport unit. Tube Conveyor is used for the horizontal transporttation of products in flour plants. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Depending on the central control, it takes action by being set up with chain gear and ensures the transportation of the falling product. The body is made of steel. It has idler drive bearing system. It has been designed with a special tensioning device. It varies according to the desired capacities. Carrier plates are made of hardened steel. It is used wherever horizontal transportation is possible. It is used in feed, food, chemical, mining, sawdust and soil industries. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is utilised to partitioned air from the item, which is released from a typhoon separator into pneumatic frameworks. It is introduced underneath the twister separators and air filters. It works with the negative weight and in addition an air seal against spillage. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories ◾ Biscuit and macaroni plants

It is used to discharge or cut the flow of free flowing raw material or product to the desired terminal. It is used to discharge the product transported by the spiral using under the spiral to the appropriate parts. Reciprocating motion is performed by pneumatic piston or manually. The spiral is manufactured in different models according to the chain conveyor model. Two different models (pneumatic and manual) can be used at the outlets of silo and bunker with screw and chain conveyors. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is used to separate heavy foreign materials such as stones, glass and metal pieces or soil pieces in the grain with the help of screening method and air. The machine consists of a fixed chassis and vibrating body. The stone separator, designed considering the difference in density of stone and grain, separates the stone by directing the grain in the direction of gravity, in the opposite direction of gravity, with the help of vibration. Wheat is separated from the stones with the help of a vibrating sieve. In addition, dust is absorbed by the air aspiration provided from the ventilation line. Apart from flour and semolina factories, it is also used in all grain factories, vegetable oil factories, cocoa and coffee processing plants.

Pellet mill’s working principle is, mash feed is forced outward through holes in a ring die by the action of two or three rollers, which is then cut to a predetermined size. Before mechanical process, steam can be injected into the conditioner at temperature 85 degrees celsius. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories