Welding screw - Import export

It is not so common, but it greatly increases the efficiency in our welding shop

Applications and projects : conveyor systems assembly lines robotic units screwing welding Poka-Yoke vision Pick and Place Some practical examples : roll-forming machine conveyor system with elevator assembly lines for plastic and metal components ergonomic workstation on assembly line unit for recovery, transfer and removal of springs on assembly line

Street gates available in various models, colors, dimensions and materials, such as stainless steel, aluminum and iron, as well as welded and screwed.

When screwing or welding are not possible, impact protection can be affixed with secutex special stickers.

secutex – the gentle power against raw impact forces. If screwing or welding is not possible, just glue the secutex where impact protection is required. No problem with the secutex special bonding material. These are the advantages by gluing (nearly) everywhere applicable No drilling or welding necessary Bonding where welding or screwing is impossible Applications Thin to medium thick wood plates Glass and plexiglass Sound absorbing elements Fine wood surfaces Examples Coolhouses Painted, laminated, veneered walls and surfaces According to special requirements A proper bond requires always a good preparation … The following procedure is needed 1. Cleaning of the surface Suitable grease and siliconedissolving cleaning agents are required. This step is important to ensure that there is no dirt on the surface which may be present during the grinding or sandblasting process. 2. Roughening the surface Sandblasting or grinding of the surface are especially suitable here.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

This transducer can be used anywhere thanks to its small size. Designed to work without a measuring chamber (uses a flush front diaphragm instead), this transducer is ideal for any measurements where the material to be measured may leave problematic residues. The range of suitable applications is even greater thanks to a choice of screw-on or weld-on adapters. Areas of use: Bottling plants, food industry Mixing facilities for the chemicals industry Pharmaceuticals Cosmetics industry Bioengineering These miniature pressure transducers are made entirely of titanium and therefore have outstanding resistance to corrosion. These convert the pressure-induced deflection of the diaphragm into a change in electrical resistance, which can be amplified, measured and processed by external electronic circuitry.

The STS-spiral roller brush range from Kullen-Koti contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks. Due to the high fill density and precisely ground surface it achieves outstanding results. A flawless radial true runing is a requirement in most cases to achieve the desired brush effect. Therefore the brush cores are electrodynamically pre-balanced and re-balanced according to the required RPM after assembly of the spiral brushes. The balancing quality refers to quality grade G 2.5 as per ISO 1940. As core material we have available: mild steel, stainless steel, non-ferrous metal or plastic coated steel. Fixing of the spiral coils The coils are generally mounted onto the roller cores with pressure rings (PRB) in order to prevent the brush from roating on the core. Depending on the work and the rotation speed of the brush the coils can also be spot-welded or screwed...

Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges, for example in a self-adhesive design, or fixed by screws or by welding. As our standard types which are available from stock we chose our most demanded sealing brushes concerning the trim heights and overall lengths. Our standard types we supply from stock in 7 different profile types made of galvanised steel, heat-resistant also in high thermal fluctuations. The stock types are filled with polyamide (PA6), mane hair (MAH) and phosphorbronze-wire (PHB).

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

CHARACTERISTICS: Slip-resistant plate top cap PVC slip-resistant feet Top cap with tool holder Wider steps, providing higher comfort Welded steps (no rivets or screws) Anti-splay safety belts on the versions from 4 to 9 steps Available on the versions of 4 to 9 steps TECHNICAL SPECIFICATIONS: Profile Front 61mm / Back 40x20mm Slip-resistant step with 120mm WARRANTY: 2 Years USE: Professional and Industrial

CHARACTERISTICS: This platform model is specially designed for the use on works which require a worker to remain in a higher level for a longer period of time Slip-resistant plate top cap Superior platform with 40mmx50mm and equipped with frontal guardrails PVC slip-resistant feet Top cap with tool holder Handrail on both sides 2 Wheels and 2 supports to facilitate handling Comfortable slip-resistant steps Welded steps (no rivets or screws) Available on the versions of 6 to 14 steps TECHNICAL SPECIFICATIONS: Profile Front 78mm / Back 65x25mm Slip-resistant step with 85mm WARRANTY: 2 Years USE: Professional and Industrial

screw and barrel for rubber extruder Material: HVOF Spray Coating Screw, PTA Spray Welding Screw, Nitriding Screw Application: For use in the Injection Moulding Machine , Extrusion Moulding Machine, Bakelite Moulding Machine, and Rubber Moulding Machine. Processing Dimension：Min External Diameter Ø 12mm, Max External Diameter Ø 250mm,Effective length Ø 8000mm . Machining SCREW Heat-treatment, Nitriding treatment, Electroplated hard-chrome finish, High-frequency quenching, Spray coating bimetallic-alloy, Vacuum quenching. Customer’s specification and drawing are accepted in the manufacturing various materials of pillars, columns, tie bars, guide rods which applicable to various plastic, rubber injection molding machine, hydraulic machine, diverse machine tool etc. (Special dimension and spec. are also acceptable. )

Galvanized and powder coated steel elements. The device permanently sited in the ground with concrete min. C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing.

Ming Xiao Mfg is engaged in cold heading non-standard forging parts processing services,we have a friend factory (Ruian Fengyu Standard Parts Co., Ltd.) produce cold forging standard fasteners,the main production is welding nuts & screws, Automobile Hub Nuts & Screws,Specs from M4 - M18,also can custom all kinds of hex nut,square nuts in UNC and Metric threads. Ruian Fengyu Standard Parts Co., Ltd. is a professional manufacturer of all kinds of standard parts. a ISO9001/ TS16949 certified manufacturer specializing in the production of GB, American standard (ANSI), German standard (DIN), Japanese standard (JIS), international standard (ISO) and other types of anti-loose nuts, welding nuts, screws, fasteners and customized various non-standard fasteners. Attempts to sell Automobile hub nuts & screws to foreign markets at the request of friendly factory, Ming Xiao can provide lowest ex-factory prices to foreign customers.Welcome send us inquiry, we will reply you in 48 hours.

Ming Xiao Mfg has a friend factory produce cold forging standard fasteners,the main production is welding nuts and welding screws, Specs from M4 - M18,also can custom all kinds of hex nut,square nuts in UNC and Metric threads. Welding nut is a nut is suitable for welding nut, generally can be welded and thicker and welding materials, welding is equivalent to two separate parts into a whole, with a high temperature metal melt together and then cooling, in the middle will join alloy, internal is a function of molecular force, intensity is generally larger than the maternal strength. The test of welding parameters depends on the fusion size of the weld, and the welding parameters should be adjusted according to the fusion size until the defects are eliminated. Of course, the quality of welding is related to welding pre-treatment, dust removal, oil stains and so on. Attempts to sell to foreign markets at the request of friendly factory, Ming Xiao provide lowest ex-factory prices.

Galvanized and powder-coated steel elements. Device permanently founded in the ground, concrete foundations with minimum class: C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing

China Sheet Metal Stamping Parts Factory custom produce Aluminum,Carbon & Stainless Steel,Brass & Copper Stamping Parts as per customers’ drawing or samples. Have custom many kinds of metal stamping parts,such as sheet metal stamping clamps, metal seals, sheet metal brackets, sheet metal holder,console cover,sheet metal frames,spring clip, steel plates,shelf,Square/ Rectangular washers, metal stamped PCBA front Panel, pressed-in hole parts by PEM studs,nuts & fasteners, screw and pin welded stamping housings. Materials can be stainless steel,carbon steel,aluminum alloy,brass & copper,etc Finshing Operations: Forming, Bending,Deburring, Tapping,Riveting,Welding Surface Finish: zinc plating,chromed,nickel plating,oiled,painting,powder coating,hot-galvanizing,heat treatment & blackening,etc Mould Accuracy is 0.01mm-0.05mm We are professional metal stamping supplier from China, we custom sheet metal stamping parts for foreign customers more than 15 years.

Allow us to briefly introduce ourselves and at the same time offer the services of our company. we precisely manufacture sheet metal parts, cabinets, covers and control cabinets made of steel, aluminum or copper sheet up to a thickness of 3 mm we treat the surface with powder paints, galvanizing we describe the screen printing method we weld or press bolts, nuts, screws onto sheet metal we have exact connector tools for 100% visual quality we make various moldings, signs (e.g. grounding) or bridges for attaching cables assembly, pre-assembly, packaging we have our own trucking company TIG, MAG and laser beam welding - we produce in small and large series

Straight brackets made of cold-formed sheet steel, fitted with housing for supporting the roller axle.The choice of brackets to be welded or secured by screws depends on the type of roller to be supported and the installation to be achieved.See diagrams and tables.

Filler necks internal bayonet coupling passage diameter 30 mm, in steel or galvanized steel, to be screwed, welded or pressed on tank. They are available in different lengths and possibly equipped with vent / breather connection. In the following section you will find the most common versions of internal bayonet filler necks passage diameter 30 mm: for more details, please refer to the product’s technical sheet. This products shall be sold in combination with all our internal bayonet tank caps passage diameter 30 mm. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.

Combined fixing plates in steel or galvanised steel, to be welded or directly screwed on tanks of industrial machines or generating sets. The use of this fixing plates make easier and very faster the assembling operations of our fixed mechanical level gauge in combination with our bayonet tank cap passage diameter 40 mm. Combined fixing of tank cap and fixed level indicator allows to easily monitor the liquid level in the tank during the refueling. We also supply versions of single fixing plates and fixing plates for electronic level indicators or to connect flexible fuel filling hoses of various diameters. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.

M60X2 filler neck male threaded, to be screwed, welded on tanks or connected to filling flexible pipes for fuel, hydraulic oils and other fluids. This filler neck is available in different lengths, materials and types. On request we can provide it with removable or fixed filter or complete filling systems with flexible pipes. M60X2 filling system can be combined with our Niches 60 F series or directly with our ALU M60X2 and M60X2 with key threaded caps. Available versions with vent/breather connection and types in stainless steel for nautical applications and corrosive environments. The adoption of accurate production processes also performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.

2” filler neck male threaded, to be screwed, welded on tanks or connected to filling flexible pipes for fuel, hydraulic oil and other fluids. It is available in different lengths, materials and types. On request we can supply versions with removable or fixed filter, vent/breather connection or complete filling systems with flexible pipes. 2″ threaded filler neck can be combined with our niches 60 F series, our threaded caps ALU and ASM.CF or our mechanical threaded level gauge cap. It can be used in various sectors, including nautical applications and corrosive environments for which we suggest stainless steel versions. The adoption of accurate production processes also performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product.

We reserve the right to make technical changes without notice. Options are machine parts that can only be ordered while buying the machine. Press designed specifically for the production of automotive hoses. A good example for such a tailor-made solution is the HMC 1-25 and the HMC 1-30 with patented C-shaped crimping tool designed for radial insertion of complex hose lines. This special press is an ergonomically designed, low-noise machine that requires no lubrication. It has been specifically devised for the production of hoses for the automotive industry, offering outstanding press forces and precision. With PFC and other optional features, you can adjust the press force to process materials that are easily damaged, producing strong and lasting connections without any need for gluing, screwing or welding.

Designed to be accurate, repeatable, and easy to operate IEC584 color standard (green) for type K thermocouples Strong crimped plug/cable attachment CLAMP thermocouples clip to non-ferrous components Clamp Surface for measuring substrate temperature Clamp Air for measuring ambient temperature ADHESIVE PATCH thermocouple Ultrafast response, single strand and PTFE coated Minimal thermal mass – ideal for small items or plastics EXPOSED-JUNCTION thermocouples for use on test pieces that are left permanently rigged Attached to the substrate by spot welding, soldering, use of high-temp tape or screw EXPOSED-JUNCTION THERMOCOUPLE – HIGH-TEMPERATURE featuring a glass-fiber cable Attached to the substrate by high-temp tape or screw, or spot-welded into position Placed at critical points on the product, thermocouples enable temperature profiling with a DATAPAQ Oven Tracker. All DATAPAQ probes conform to the highest standards and provide the most accurate data possible.

Creating an optimal bond between a metal plate and the silicone: that was the challenge Enbi Plastics was given by Océ Technologies, a major player in printing and copying equipment. They needed a new wiper assy; a part on the print head that prevents streaks on the paper. Because this part needs to be somewhat flexible, silicone needed to be added to a small, punched metal plate, to which screw thread is welded. This construction did not allow for a mechanical bond between the metal and silicone, which meant chemical bonding was the only option. Together with the client, the mould supplier, the silicone supplier and others, we did extensive research into the best way to achieve this bond. It showed that preparing the small metal plates was the key. After several tests, we discovered the optimal way to do this. A number of factors play a role: from how to clean and sand the plate to humidity, temperature and the time in between the steps of the process. Every detail counts!

The product portfolio at SIM Automation ranges from the effective design of individual manual workstations all the way through to completely interlinked, highly automated process lines. We handle all common transfer systems and can thus offer solutions that are independent from the branches of our customers. In addition to all standardized joining, measuring, testing and inspection systems, our assembly plants can also implement the customer’s own processes, including: - Joining, screwing, bonding, riveting, welding (laser, ultrasonic, resistance) - Testing, measuring, inspecting (optical, tactile, electrical, thermal) - Robot systems - Linear systems (pneumatic, electrical, mechanical) - Cam-controlled drives, linear and handling systems Testing and inspection lines we have been involved in: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. The NH-001-06 from EMKA is a 120° concealed hinge with a screw-on or weld-on mounting to have a maximum of 20 mm door return and is used on single cabinets. Its compact, rigid design is constructed out of mild or AISI 304 stainless steel and only weighs about 0.25 lbs.