Water heater - Import export

This sensor is attached in a water heater or boiler and measures the water temperature. Widely adopted by Japanese and Chinese manufacturers. ・Fast Thermal Response with High Accuracy ・High Humidity Resistance Performance ・Cost reduction and stable quality by simple structure Please contact the following for details. E-mail sensor@tateyama.or.jp

The needs of the power generation industry include year in and year out reliability, optimum performance for maximum efficiency, and absolute on time delivery to meet plant outage schedules. All of the Jet Flow Boiler Feed Water Heaters are designed in accordance with HEI standards, TEMA and ASME codes. Jet Flow uses state of the art computer programs to perform the thermal hydraulic and mechanical design of each Feed Water Heater we fabricate. Jet Flow designs and manufactures both Low Pressure (LP) and High Pressure (HP) feed water heaters which may be installed either vertically or horizontally, depending on the plant design requirements. Each Jet Flow Feed Water Heater will contain from one to three separate heat transfer areas of zones including the Condensing, Desuperheating and Subcooling zones. Our heaters can be provided with multiple zones within the shell side Condensing Zone Included in all heaters,steam is condensed in this zone and non condensable gases are removed.

Single under seat heater for buses and commercial vehicles.

PS 200-2000L Series Buffer Tanks with Removable Thermal Insulation Capacity Range: 200-2000 liters Removable Thermal Insulation: Highly effective composite insulation, 80 mm thick for models up to 2000 liters. For models starting from 2500 liters, insulation is made from soft polyurethane foam, 80 mm thick. Maximum Operating Temperature: 95 degrees Celsius Maximum Working Pressure: 3 bar Insulation Class: Class C Power Supply Compatibility: Accommodates various types of power supply for flexible usage.

Dimensions Width 3.00m Length 12.00m Height 2.61m Square meters 36.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 6x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € Forklift introductions (incl. installation) €650 The prices does not include VAT.

Dimensions Width 3.00m Length 8.00m Height 2.61m Square meters 24.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 6x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € Forklift introductions (incl. installation) €650 The prices does not include VAT.

Dimensions Width 2.40m Length 6.00m Height 2.61m Square meters 14.6m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 3x floortoceiling windows, 1x normal window, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € The prices does not include VAT.

Typical Fields of Application are in the chemical, petrochemical, railroad and shipbuilding industries, in the machine and industrial equipment construction. CSN® circulation heaters are manufactured in close coordination with our customers from a few watts to the megawatt range, a division in individual circuits is made according to customer’s requirements. Equipment for installation in hazardous areas we produce in protection class „Ex d“, „Ex de“, „Ex e“. On request, CSN® circulation heaters are supplied with optimized process controls. Please contact us to talk about the most appropriate control system. Schniewindt is certified by the Lloyd’s Register to produce equipment according to the Pressure Vessel Directive 2014/68/EU and a certificate from TÜV (Technical Monitoring Agency) certifies that we meet the prerequisites for welding procedures according to AD 2000 Merkblatt HP 0 / DIN EN 7293.

Immersion heaters from 0,1 kW up to 300 kW for tank heating or as components for machines: - Lube oil heaters for compressors, pumps, turbomachinery, refrigeration machines and others - Tank heaters for oil, water and other liquids - Gas heaters for process applications - Anticondensation heaters for electrical motors and machine housings Range from 0,1 kW up to 300 kW ATEX, IECEx, TR-CU and other international certificates

Electrical pocess heaters from 0,5 kW up to 1000 kW including pressure vessel, according ASME, PED or TR-CU. Gas heaters for natural gas, seal gas, fuel gas, industrial gas applications, process gas. Liquid heaters for oil, water and any process liquids. ATEX, IECEx, TR-CU certificates. Operating temperature up to 1000°C Operating pressure up to 500 bar

Flexible Polyester Heaters consist of a conductive ink between two insulation layers of polyester. The heater can be pressed on or fixed with a self-adhesive foil. Wrapped in PVC the use in liquids is possible as well. Typical standard applications are e.g. mirror heaters, water bed heaters, or low temperature room heaters. For terrarium and aquarium heaters we offer standard elements as well.

Electrical process flow heaters The “STR type electrical process flow heater comprise a large range for industrial application custom built to meet client specification. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases.

EEx’e’ certified electrical process flow heaters EEx e T1 – T6 ATEX The “STR-Exe” type electric process flow heaters are EEx e certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The “STR-Exe type electrical process flow heater comprise a large range for industrial application. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

Electrical process flow heaters The “STR-TWIN type electrical heater comprise a large range of process flow heaters for industrial application custom built to meet client specification. Due to the small diameter construction of the vessel it is perfectly suitable for low volume or mass flow. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

BORSIG supplies synthesis gas boilers for gas pressures up to 350 bar (35,000 kPa) and steam pressures up to 160 bar (16,000 kPa). They are used in the synthesis gas loop of ammonia plants. The boilers are equipped with U-tubes and can be mounted both in the vertical as well as in the horizontal positions. With both designs, the steam drum can be integrated into the boiler if requested by the customer. At the same time, a feed water pre-heater can be installed in the boiler when required.

In addition to its standard models, ASCO offers a large number of modern and easy to maintain CO2 vaporisers. In accordance to your requirements, we provide you with a suitable model. In order to meet every customer's need, we have different types, technologies and capacity ranges from 100 to well over 2000 kg/h. ASCO offers following technologies Cold water circulation Electric water bath heater Gas heated water bath Electric Atmospheric Individual solutions Costoptimised applications Reliable operation Minimal maintenance Customised adaptations to local conditions Expert knowhow Outstanding customer service

IRW Water Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.IRW Water Cooled Type Rooftop units operates with environmentally friendly refrigerants. The air distribution and return are carried out by air ducting which is the best idea for the complex areas to cool down. Various compressor and refrigerant type usages brings trouble-free operation with high cooling water temperatures. Heating can be carried out with electrical heater, steam, hot water and thermal oil resources.

External electrical box with power connection Internal electrical distributor with fuses 3 pieces – potentiometer (speed controller) Double switch Simple switch Single socket Double sockets ADDITIONAL ELEMENTS Door with marking Women's/men's toilet Space Technical room with hydraulics HYDRAULICS 3 pieces. Bath fitting 4 pcs. Toilet 4 Stk. Urinal Hydraulic parts Pressurized water pump Electric water heater

Wall Structure: Sandwich panel with a thickness of 33mm, outer layer laminate, XPS core Structural wall additionally reinforced with plywood Floor: Waterproof plywood covered with PVC flooring with increased abrasion resistance Frame: Steel, hot-dip galvanized Furniture Equipment: Recessed cabinets Wardrobe cabinet Sink cabinet 2 drawers Worktop covered with stainless steel Stainless steel hood Furniture made of high-density chipboard Hydraulics: 2-compartment sink Flexible faucet Hydraulic parts Seaflo self-priming water pressure pump. Capacity: 3.8L/min Kospel electric water heater, IP24 protection class

Gas Pilot burner in Gas Water Heater Parts

Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes through the interior of the heating coil of the air heater and the heat transfer is carried out by the air fan of the air heater. The fan can be axial or centrifugal, the axial type is used for direct dissolution and the centrifugal fan allows a network of ducts to be applied in addition to having a greater reach.

Universal Gas Thermocouples Used on BBQ Grill or Fire Pit Heater or Gas Water Heater M8x1 End Nut and Head Tip

We manufacture steel or aluminium tanks and vats for wide range of industry. We provide tanks and vats according to customer drawings. Our production and welding services are in accordance with ISO 3834-2 and other certificates we own: EN 1090, EN 15085, DNV-OS-C401, 9001:2015 and ISO 14001:2015. WE can produce wide range tanks and vats according to yours drawings. At clients’ request Base Group can produce: Water Heater Tanks, Water Storage Tanks, Heat Exchangers Tanks, Stainless Steel Process Tanks, Expansion Tanks, Heating/Cooling Package Units, Food Industry Tanks, Chemical Industry Tanks.

Rollbond exchanger evaporator for cooling or heating

This commercial hot water heat pump is the best solution for hot water supply of commercial project, and can work with advantages of high safety, stability, much convenience, energy saving, and environment friendly, which assures 24 hours comfortable hot water using. It is widely used in hot water project of school, hotel, hospital, supper market and other large building, which needs large water volume supply. Main Features 1) Copeland scroll compressor, quiet and high efficiency. 2) High efficiency heat exchanger. 3) 600 stage adjustment precision electronic expansion valve. 4) Schneider electrical components. 5) Intelligent controlling system. 6) Intelligent EE valve, excellent efficiency at different ambient temp. 7) Easy installation and LCD operation. 8) Automatically defrosting. Optional: R410a, R22, R407c refrigerant is available.

YINI domestic all in one heat pump water heater uses free renewable energy from the air, the unit is highly efficient with low running costs. Its efficiency can be up to 3~4 times more than conventional gas boiler or electrical heater. It is suitable for heating and hot water supply of family, villa, apartment,business restaurant, hotel and multi-floor living building in city and village. Our Air to water heat pump water heater saves up to 80% electrical power energy than normal electric water heater. 150L, 200L are optional.

Metal Hoses For Water ** / Size: (30 cm- 40 cm- 50 cm- 60 cm- 70 cm- 80 cm- 90 cm- 100 cm- 120 cm- 150 cm- 200 cm) / Hose Type : Standard Corrugated Metal Hose / Hose Material : Stainless Steel AISI316L / Cover : Non-covered / Connection : Female-Female / Male-Female / Standard : EN 10670 *** Application Areas: Heating Systems / Combi connections / Water heaters connections / Room Heater Radiator Connections / Tank connections

Fan-Coil Metal Hoses For Water ** / Size: (30 cm- 40 cm- 50 cm- 60 cm- 70 cm- 80 cm- 90 cm- 100 cm- 120 cm- 150 cm- 200 cm) / Hose Type : Standard Corrugated Metal Hose / Hose Material : Stainless Steel AISI316L / Cover : Fan Coil- Rubber Based Speical Inslation / Connection : Female-Female / Male-Female *** Application Areas: Heating ,Air Conditioning Systems / Combi,fan heating connections / Water heaters connections / Floor radiator Connections / Tank connections