Wall plates - Import export

Single Wall: Perfect for outdoor meals. Available in 8 oz, 12 oz, and 16 oz. Customization with logo starting from 30000 units. Double Wall: Ideal for hot dishes. Thermal insulation. Customization starting from 1000 units. Why choose us? Environmental respect. Durability and robustness. Simplified ordering process.

Initially designed for the bathroom, the Barbès wall light and ceiling light can just as easily go in the hallway, on either side of a bed, or even in the living room to flank either side of a mirror above the fireplace. Featuring sandblasted glass, the wall light pivots on its plate.

Reusable cold chain pallet box. This sleeve pack has a pallet dimension of 1000x1200mm but can be provided standard in the following pallet dimensions and a height of your choice: OUTSIDE (mm) INSIDE (mm) 1200 × 800 1090 x 690 1200 × 1000 1085 x 885 1140 × 790 1025 x 675 1140 × 980 1025 x 865 1220 × 1140 1110 x 1030 1300 × 1140 1185 x 1025 1470 × 1140 1355 x 1025 1550 x 1140* 1445 x 1115 1600 × 1140 1495 x 1015 * fitting a quarter of a PMC-plate (for air cargo). CONSTRUCTION WALLS 10mm thick, 3.000gr/m2 density high impact Polypropylene cell structured laminated plate material WALL ISOLATION VIP-panels (Vacuum insulated panels) with fused silica RIMS all rims are closed for hygiene and easy cleaning PALLET & LID Hdpe Twin sheet injection molding

Wall plates for 2-liter-cartridges, for lotion pumps wall plate, black wall plate, white

for foam, lotion or spray pumps Measurements in mm (W x H x D): 85 x 230 x 105 Wall plate for foam pump, black Wall plate for foam pump, white Wall plate for foam pump, silver

premounted wall plate | plate is expandable Only plate: dispensers are not included in delivery!

ABS | lockable | detachable wall plate | brake function Measurements in mm (W x H x D): 155 x 325 x 175

ABS | detachable wall plate | for 1.000 ml foam soap cartridges Measurements in mm (W x H x D): 105 x 240 x 120

ABS | detachable wall plate | Sensor | for 1.000 ml foam soap cartridges Measurements in mm (W x H x D): 105 x 250 x 120

ABS | lockable | detachable wall plate | Autocut | push lever Measurements in mm (W x H x D): 320 x 430 x 210 Auch in diesen Farben erhältlich:

ABS | lockable | detachable wall plate | Sensor | for 4 x D 1,5 V Batteries Measurements in mm (W x H x D): 320 x 430 x 210 4 x Duracell D 1.5 V batteries are included in the scope of delivery Datasheeet

Hygienic dosage of liquid soaps, lotions, disinfection agents, etc | easy filling from canisters or with 500 ml bottles | for cleaning remove it from the wall plate with only one turn of the hand | very robust and lockable Measurements in mm (W x H x D): 95 x 260 x 185 Contents: 500 ml Cover: white-transparent Dosage dispenser, stainless steel Dosage dispenser, aluminium Dosage dispenser, ABS

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, silver, with drip tray Universal Arm Lever Dispenser, ABS, silver 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, white, with drip tray Universal Arm Lever Dispenser, ABS, white 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

Individually manufactured for you - special designs without length limitation This sealing type is mostly used in tank construction, where they seal the gap between the tank wall and the longitudinal separator plate. Correct use of the baffle seal can significantly reduce power losses in heat exchangers. The sealing effect is achieved by 4 spring lamellas each, which are mounted fan-like in the support profile.

HORIZONTAL MEAT LOADING ELEVATOR TECHNICAL SPECIFICATIONS Chassis: Designed with a focus on strength, durability, and aesthetics. Chassis Material: Entire chassis is made of 304 CrNi material. Our machine features a single-walled stainless steel boiler. Boiler Plates: The boiler plates are entirely made of 304 quality CrNi material. Boiler Body Plate Thickness: 2 mm Profile: 60 x 60 x 2 mm Has a capacity of 200 liters for meat loading. Has a capacity of 500 kg for meat transportation. Hydraulic System Maximum Safety Easy operation with manual control panel Electrical components are SCHNIDER or DELTA brand.

300 LT LIQUID SPICE MIXER MACHINE TECHNICAL SPECIFICATIONS Chassis: Designed with a focus on strength, durability, and aesthetics. Chassis Material: Entire chassis is made of 304 CrNi material. Our machine features a single-walled stainless steel boiler. Boiler Plates: The boiler plates are entirely made of 304 quality CrNi material. Boiler Body Plate Thickness: 2 mm Liquid Spice Mixer - Mixer Gearbox: 80 RPM 0.75 KW Electrical components are SCHNIDER or DELTA brand. Ensures thorough blending of added spices. Ensures optimal binding of added proteins. Prepares the product for further processing.

Ideal for builtin installation in hallways, corridors or smaller spaces. The installation of the cooling unit and water plate behind the wall offers uninterrupted corridor space. All elements manufactured from stainless steel top plate, front panels, internal chassis and cooling unit. Large interior dimensions for comfortable drinking. Compact A316 stainless steel bubbler with water guard. Antivandalism front push button and regulation of water height through exclusive high precision membrane valve. Deep rounded top plate with antisplash design. Removable lower ventilation panel for maintenance access. Recessed chassis to support the top plate, front panels and cooling unit. Easily regulated cold water temperature (thermostat) Possibility of emptying the cooling unit for greater hygiene. Furthermore the possibility to drink with cups or fill bottles for LV models. The installation of a purification filter is recommended for better water quality.

Wall bracket, width 210 mm, heavy-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 90 mm Width: 210 mm Load capacity: 5.5 kN Make: OBO Bettermann Type: AW 55 21 FT

Wall bracket, width 210 mm, light-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimension: 210 x 60 mm Width: 210 mm Load capacity: 1.5 kN Make: OBO Bettermann Type: AW 15 21 FT Item no. : 6420680 Make: OBO Bettermann Type: MWA 12 21S FS Item no. : 6424732

Wall bracket, width 210 mm, medium-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 70 mm Width: 210 mm Load capacity: 3 kN Make: OBO Bettermann Type: AW 30 21 FT Item no. : 6419720

For the best in superior quality, high-performance paint spray booths that will handle the most diverse of coating and finishing applications, our paint spray booths are available with different airflows – crossdraft, modified crossdraft, side downdraft, full downdraft, and open face styles. Specification: Body & basement: Wall panel: thickened colour steel plate, fireproof heat insulation materials. wall panel horizontal type installation, Polystyrene as option. Basement: steel structure, 4 tons rated load. Fans Intake Fan: total air flow volume is 24000m³/h. Spraying/baking transition damper: cylinder driving mechanism. Burner & filter: Heat exchanger: made of stainless steel, cycling heating. Burner: RIELLO /RG5S (https://www.gzguangli.com/spray-paint-boothburner_p32.html). Roof filter: Punching type network installation. LED light & control box: Upper light: 10sets, Side light: 7 sets.

Derin hand painted ceramic wall plate 31cm Made in Turkey.

You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard Intelligent Gas Sensors for AsH 3, Cl 2, ClO 2, CO, COCl 2, H 2, H 2S, HCl, HCN, HF, N 2H 4, NH 3, NO 2, O 2, O 3, PH 3 and SO 2 The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features everything that a new gas detection instrument of the latest generation needs: State of the Art components (hardware and software), smart sensor technology, “heartbeat” sensor control and complete system diagnostics on board. What makes the Statox 505 so reliable? In process monitoring, the status of plant components in case of a failure is becoming more and more a critical issue. The standards DIN EN 61508 as well as the product standard DIN EN 50402 are powerful tools to calculate the probability of a failure on demand. The Statox 505 complies with all of the requirements of these standards. It obtained the safety integrity level SIL 2. This provides a reliable database for the user to calculate the safety standard of his plant. If the Statox 505 is operated as a SIL 2 component, a so called “proof test” in certain time intervals is mandatory. All OK All important parameters such as sensor „heartbeat“, signal output, calibration, zero, sensitivity, temperature, sensor memory, amplifier, CPU, power supply etc. are continuously monitored for proper function. In case of a failure, an alarm will be triggered. Thus the system cannot fail without the error being noticed. A green LED signalizes the system status. The display and the controls are located at the inside of the housing - well protected from the elements. Minimum time and work in the field The sensors of the Statox 505 are plug and play technology. Each sensor has a F-RAM on board which communicates all relevant parameters to the sensor head: Gas, measuring range, last calibration, ex works calibration, response time etc. The sensors can easily be calibrated in the shop. For the user this means that he never ever will have to do calibration work in the harsh elements (wind, rain, cold, heat). No more lugging heavy test equipment and gas cylinders into the field. All the user has to do in the field, is plug the sensor back in. To do that, you don`t even need a tool! While the sensor is getting calibrated in the shop, the sensor cartridge stays in place and protects the sensor head from dust and rain. Trouble- free wall - or pipe mounting The Statox 505 comes with a mounting plate for either wall - or pipe mounting. No need to open the sensor head for plant installation Storage temperature

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.