Results for
SFA ENVIRO
France
Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. COMPONENTS Brush bridge shaft with anti-corrosion paint Galvanised Steel brush blades or stainless steel Side protection discs Bearings Vertical geared motor with high energy class IE3 enclosure and eciencies Horizontal geared motor with energy class IE3 enclosure and eciencies Geared motor support bracket Upstream and/or downstream rotor cover Automatic grease cartridge Operator safety features on and upstream of the brush aerator
Request for a quoteAPLAST D.O.O.
Slovenia
Water measuring thermal chambers are intended for the installation of a water meter for individual houses and other smaller water users outside the building. We have been making them for 20 years now and have over 100,000 users. Advantages: structure protects water meter from cold in winter conditions, prevents freezing of water meter and connection installation - chamber has no bottom, which allows for the transfer of heat from the bottom layer of soil directly under the thermal isolation cover, simple reading and replacement of water meter - it is located in the top part of the chamber which simplifies access, stability of chamber - the top part of the water measuring thermal chamber is additionally reinforced with strong reinforcement ribs, high circumference rigidity allows for independent installation, a strong and stable base of the chamber can bear vertical load without the use of a concrete bed, QUICK, EASY AND SIMPLE INSTALLATION.
Request for a quoteVILLINA LLC
Russia
The design of an electric pump section is similar to the design of a standard vertical electric pump with a GNVC series magnetic coupling, which allows for the use of already proven technical solutions: impeller blades with curved surfaces create an angle of attack and partially allow for switching to the laminar mode of wall-adjacent flow on their surface and provide more efficient deflection of liquid to the periphery; a closed type impeller has a higher efficiency and longer service life compared to open and semi-closed impellers; bell-type fit of the impeller on the pump shaft precisely keeps the geometric position of the impeller with respect to the guide vanes; the vertical position of the shaft resting on a heavy-duty carrying cushion in the vertical plane, and sleeve type bearings in the horizontal plane help prevent sagging of the shaft, as for instance, in the horizontal design of the pump, and play and runout; the use of sleeve type bearings
Request for a quoteVENJAKOB MASCHINENBAU GMBH & CO KG
Germany
The adsorption system (AD) from Venjakob Umwelttechnik serves to concentrate exhaust air flows containing low concentrations of pollutants, and is particularly suitable for removing extremely low to medium concentrations of solvent-based pollutants (VOCs). This machine is characterized by: During the adsorption process, the pollutants are physically retained on the surface of a solid material (e.g. activated carbon, zeolite). The pollutants are then removed /desorbed from the zeolite by means of a small, hot stream of air. Afterwards, the flow of exhaust air from the desorption process is cleaned by means of an exhaust air cleaning system (TI, RTO, CTO). By reducing the volume and by increasing the concentration, the operating costs of the downstream exhaust gas purification system can be kept very low and make autothermal operation possible among other things The rotor is mounted vertically on a shaft with bearing and rotated slowly in the air flow. During rotation, the adsorption and desorption take place simultaneously in separate chambers with cooling on a hydrophobic (water-repellent) incombustible zeolite material. For tough applications, versions can be provided with a removable wear layer and / or higher temperatures of up to 300 ° C for desorption. Two containers are operated alternately. While one of the containers is adsorbing, the other container can be desorbed The adsorption process can be used for smoothing pollutant concentration peaks. If pollutant peaks occur during a process that could lead to a potentially explosive mixture (> 25% lower explosion limit), they cannot be introduced into an incinerator. However, the pollutants may be temporarily stored in an adsorber and then be released during the desorption phase. In certain situations, the installation of an additional fixed bed adsorber (molecular sieve) may further enhance the process (safety, operating costs).
Request for a quotePALLMANN MASCHINENFABRIK GMBH & CO. KG
Germany
The Pallmann Depither, series PMS "Centurion" is used for depithing of sugar cane bagasse. The retained bagasse fibers are used for the production of cellulose, the production of fiber boards or for the production of particleboards. Furthermore, the depither can also be used for the preparation of other vegetable raw materials. The machine is designed for the wet preparation, moist preparation or dry preparation processes. Characteristics, Function The material is fed from the top The rotor is vertically arranged with bearings on both sides and equipped with hammers that can be used on both sides The hammers are free swinging and armoured at both sides of the tip Material preparation and separation of the pith from the fiber is performed by means of impact and friction Longer fibers are retained by a screen while the pith and the fines are discharged through a screen with the air flow Pith and fibers are discharged and transported separately Advantages High throughput rate...
Request for a quotePROMSTROIKONTRAKT
Russia
Universal deck form PSK-CUP combines the functions of deck form and scaffolding. The deck form PSK-CUP corresponds to the space frame which forms the rigid frame without joints which does not require additional stabilization by diagonal connections in most cases. It is assembled from the tubular members: vertical and horizontal, lower threaded lifting jacks and upper threaded uniforks, connection elements, it may be completed with fixation elements. Vertical elements are the basic bearing components of the framework on vertical plane. There are six basic dimension. They are joined with the help of connection elements according to the principle “tube-in-tube”. In every 500 mm the vertical elements have welded cup connections – “lower cup” produced from the high-quality steel, with the attached mobile cups – “upper cup” produced from ductile casting. They provide support for horizontal elements. The horizontal elements provide the framework rigidity.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Vertical bearings - Import exportNumber of results
6 ProductsCountries
Company type