Variable speed - Import export

Discover our range of Variable Speed for combine harvester and many other combine harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.

"The demand for speed control has taken off with the advent of IGBTs and powerful microprocessors. Today, there is no longer any difference between DC and AC. 99% of new installations will be equipped with variable speed AC solutions. In our product range, we have both DC and static frequency inverters. Characteristics of a DC drive: - Three-phase power supply between 200 and 690V - Digital inverter - 2 and 4Q solution - Power between 2.4kW and 3.2MW - IP20 protection - Modular drive for cabinet mounting - We have a stock only in 4Q up to 900A"

EL CLOSE is an intermittent or continuous closer for cases with flaps. This solution is able to accommodate carton design variability. Its speed can reach 60 cases/minute. EL CLOSE is totally designed to be interfaced with any SYNERLINK machines.

"IP23 ventilated open motors (ODP) are an ideal solution for our customers who want compact and smaller motors than IP55 motors. In general, these motors have one less frame size. They are mainly used in clean environments (e.g. manufacturing of plastic bottles for soft drinks, cold compressors for food freezing, ...) STANDARD OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron housing - IP23 protection - Insulation class F - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors - Motors are equipped with an isolated bearing for use with a variable speed drive. The PI will eliminate circulating currents in the rotor. - Provided with two ball bearings

"The demand for speed control has taken off with the advent of IGBTs and powerful microprocessors. Today, there is no longer any difference between DC and AC. 99% of new installations will be equipped with variable speed AC solutions. In our product range, we have both DC and static frequency inverters. Characteristics of a static frequency inverter: OPEN LOOP CONTROL - Single and three-phase power supply between 200 and 480V - Digital inverter - Solution only in 1 or 2Q - Possible braking via chopper and resistor - Power between 0,37kW and 22kW - IP20 protection - Modular drive - We have a stock up to 22kW in single and three phase CLOSED LOOP REGULATION - Single and three-phase power supply between 200 and 500V -Digital dimmer -Solution only in 1 or 2Q -Braking possible via chopper and resistor -Power between 1,3kW and 900kW -IP00/IP20/IP54 protection -Modular drive We have a stock up to 160kW in three-phase 400V"

MOTORIZED STANDARD CONVEYOR TAPES WITH VARIABLE SPEED Motorized conveyor tapes are made of a structure in steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning to and the maintenance. The speed of tape is adjustable from 4 to 16 m/min by the convenient potentiometer.

PROFI 6 TI Subsea JDN Subsea Hoists The ultimate tool for every professional diver PROFI subsea hoists are a versatile and indispensable tool for professional divers and are suitable for horizontal work as well as for oblique pulling. Advantages Air or hydraulic drive Infinitely variable speeds can be regulated sensitively With overload protection Very versatile, also suitable for horizontal and oblique pulling thanks to hook suspension

ideally suited for large coil widths and thicknesses dual arbors for minimal deflection hydraulic wedge type expansion systems highestquality Reel Arbor with maintenancefree bearing and minimal deflection integrated hydraulically powered coil loading system for narrower coils even onesided use possible coil reels as seperate movable components proven support of large rollforming applications especially for the manufacture of welded tubes SHZR Series with variable speed drives via threephase motors and frequency inverter

Demag frequency inverters ensure that your motors deliver the performance that you expect. We offer solutions for virtually all drive applications with our Dedrive Pro 880 and Dedrive Compact STO ranges, to meet even the most demanding requirements. Dedrive Pro 880 and Dedrive Compact STO provide optimum utilization of motor output for variable speed control. The starting current is limited and, at the same time, the motor and gearbox loads are reduced – any mechanical elements (including the crane girders and crane runway) are protected and loads are transported smoothly and gently.

The 72711 belt sander offers all benefits of the 72780 series but with only one side. It is made for heavy duty applications. For sitting or standing operation. Variable cutting speeds from 900 to 2,800 Rpm. Optionally with frequency converter.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * service-friendly and easy to dismantle * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The secret of success of Flottweg separators is the separator bowl. The compact and robust design of the AC1500 convinces customers worldwide. Since the complete bowl can be assembled and disassembled as one compact component, simple and time-saving maintenance is guaranteed. The spindle of the AC1500 reaches its operating speed within a few seconds and can be flexibly adapted to product requirements through simple and variable speed control. In addition, the AC1500 operates so efficiently that power consumption can be reduced while at the same time decreasing the mechanical load on the system.

D-FPWR BOTTLES - SEMI-AUTOMATIC LABELING MACHINES FOR ROUND PRODUCTS Semi-automatic applicator for rolls of self-adhesive labels with maximum width mm 200/300 on bottles and cylindrical products with a diameter of mm 20 to mm 130 Main features: - Sturdy construction in steel and aluminum - Motorization of the product rotation roller and the drawing of the labels by means of stepper motors with variable speed and electronically synchronized - Microprocessor management electronics with storage of 40 working formats - Possibility to apply a wraparound label or front/back label and also with a different size with adjustment of the distance between the two programs - Maximum label width mm 200/300, and maximum coil diameter 300 mm - Change of format extremely simple and fast

The B2 Vario Pump Set is suitable for thin-bodied acids, alkalis and chemicals. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * infinitely variable speed controller for transferring and filling small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life. * Service-friendly and easy to dismantle The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

JDN Air Hoists PROFI 3 TI up to PROFI 100 TI also available as hydraulic hoists. PROFI 3 TI JDN Air Hoists PROFI Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar Standard Features suitable for application in hazardous areas (Explosion protection) sensitive infinitely variable speed control for the precise positioning of loads easy operation suitable for lube-free operation frequent switching and extended duty cycles low maintenance low headroom, lightweight sound absorption insensitive to dust, humidity and temperatures ranging from -20°C up to +70°C from 1 t upwards with overload protection (EC-version) Technical Details fail-safe starting conditions, low maintenance vane motor chain sprocket in the mid section runs in dust proof maintenance free ball bearings planetary gear in long life grease lubrication, all teeth made of tempered or hardened high grade steel chain and hook of high quality tempered steels with a breaking strength of five times the...

JDN Cranes The delivery programme comprises explosion-proof overhead travelling cranes suspension cranes as well as slewing cranes which can be adapted to your individual demands as complete special installations are our speciality. According to necessities JDN hoists in motor trolleys or monorail systems are integrated in the crane installation. A comfortable and user-friendly pneumatic speed control is also available as for example the standard two speed control for crane and trolley drive. An infinitely variable speed control of the trolley and the hoist is also possible. Different JDN Cranes in Detail overhead travelling crane with one or two main girders suspension crane also with minimised headroom - with special low headroom trolleys slewing crane crane with mechanically coupled synchronised hoists crane with parallel hoists carrying capacities up to 100 t with spans up to 36 m Higher carrying capacities and spans on request. JDN Crane Kits for explosion-proof air...

The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌

Many of the issues causing poor seals happen upstream, in the filling or capping area: a seal cannot be achieved with a missing cap or a cap with a missing foil. The capper can also cause stalled bottles under the induction coil where caps are loose or partially fitted or the cap is incorrectly fitted or too high. Issues downstream from the sealer can cause containers to back- up under the sealing head. Enercon produces a range of sensors to help ensure that the sealing process is running faultlessly, producing consistent, reliable seals on every container. • Stalled Bottle and Backlog Detector • Missing Foil Sensor • High Cap Detector • Stack light assembly • Variable Speed Conveyor Systems • Spare Parts Kit • IQ/OQ Kit

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood drift eliminators designed for forced draft. Fully enclosed and protected from direct sunlight. Fan unit driven by a variable speed drive. Controlled operation of condenser unit fans. Safe and reliable operation for rental applications. Ease of transportation, handing and protection. Reduces drift to a rate significantly lower than that required by law. Increases safety with respect to microbial growth. Regulates fan speed proportional to sump temperature. Maximises efficiency, minimises noise and prevents overcondensation when coupled with water-cooled chillers.

Whether you need a 700 kW chiller in an emergency, for planned maintenance or supplementary cooling, our expert team can help. We'll find the right chiller hire solution for your cooling requirements. Wide operating range from -17.8°C to 55°C ambient air temperature and -15°C to 21.1°C leaving fluid temperature. Variable speed drive compressors and condenser fans. 134A refrigerant. Digital control logic for precise control. Aggreko Remote Monitoring as standard. Robust, practical design. Remote current limit/ remote temperature reset Ideal for use across a variety of installations, such as air conditioning and process cooling applications. Environmentally-friendly. Fast installation and commissioning. Can be used on projects where noise needs to be kept to a minumum. Adaptive controls ensure the unit maintains very stable temperatures even with variances in flow rates or ambient temperatures. Designed to plug and play with all Aggreko ancillaries including hoses

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The TRITONE labeller was made by dividing it into modules, so as to allow use in both horizontal and vertical positions and easy integration into the packaging lines. The control is entrusted to a microprocessor, which manages the pre-separation in mm. and regulates the speed from 0 to 30 mt. min. TECHNICAL FEATURES Stepper motor with variable speed from 5 to 30 mt./min. Maximum label width mm. 100 Minimum label width mm. 20 Maximum label length mm. 300 (higher on request) Minimum label length mm. 20 Label application delay via electronic setting Label application precision mm. 0.5 Label reel with internal diameter mm. 40-76, external mm. 300 max Rewinding roller for silicon paper recovery Variable reading photocell for label stop REFLEX photocell for product detection End of roll alarm (optional) Electronic control unit Switch Stroke counter with zero setting Protection fuses Potentiometer for speed adjustment of labeling head Power supply 220 V 50 Hz. Dimensions mm.

The AViTEQ Hopper discharge unit is used below hoppers, silos, bunkers or bulk containers for flowable bulk materials and serves as a combined closure, discharge, transportation and metering device. It is used where high material flows are required. Short hopper discharge units are mounted directly below the bulk hopper. Depending on the bulk material, the discharge unit can be fitted with appropriate protective linear and sealing systems. Advantages & benefits robust design and therefore long-lasting variable feeding speed with magnetic vibrator for optimal dosing to the process bunker closure without additional barriers arrangment central below the bunker run, simple and professional installation possible upon request, in a dust-tight design to save the environment Construction The main components are: conveyor bunker shoe for product guiding inside the feeder drive elastic support elements optional: flexible sealings optional: needle or blade gate for closing Selection The s

Control humidity and help prevent corrosion and spoilage with our commercial 2000 m³/h dehumidifier. This heavy duty dehumidifier unit combines smart appearance with excellent performance. Heavy duty design suitable for a range of rental applications. Variable fan speed ensures the exact air flow for optimum performance. Electronically-controlled regeneration heater maintains the user humidity level for maximum energy savings. Remote humidistat control is available when required. With an air flow rate of between 1700 and 2000 m³/h, this is a heavy duty dehumidifier which is able to cover large areas. Cost-effective way to reduce the effects of moisture damage Do not require background heat for them to work. In-built heater controllers ensure maximum performance all year round and help keep running costs to a minimum. Can be placed inside and outside. Air can be directed into specific areas using flexible ducting. Temperature control accessories are available

Variable speed peristaltic doser, with IP65 class polypropylene housing, compact and easy to install. Main application, detergent dosage for dishwashing machines.

GRV - Geared agitator with variable speed gear unit The GRV series can be used in versatile manner. It is equipped with a mechanically variable speed variation drive with drive ratings of up to 11.0 kW. Furthermore it can be supplied with geared drives that have a standard output speed of between 1 and 1,750 rpm. The speed is adjustable with a hand wheel. The agitator shaft of the GRV series geared agitator is directly mounted on the shaft of the mechanical speed variator or with additional speed reduction (all before mentioned solutions possible). The agitator shafts are balanced for concentric run after assembly of the mixer. According to the specific mixing task, the GRV series can be supplied with matching mixing elements and various seals.