Uv light - Import export

UV-FAN Air Purifier is an air purification device of a stylish structure in extruded aluminium, coated by epoxy powder finish and lacquered aluminium. A quiet internal fan draws air from the positioned room zone into the germicidal box for disinfection and purification from microbes and chemical contaminants. The internal germicidal box contains two UV-C lamps housed in a mirror-polished aluminium airflow chamber in which to improve the germicidal power of the lamps by reflection. Air is sanitized by a labyrinth effect, passing across the 254nm UV-C lamps. Clean air is then introduced back into the environment, without contaminants. Inside the box there are two TiO2 filters; (TiO2 stands for nanostructured titanium dioxide), this is a powerful photo-catalyst as the reaction generated degrades organic and inorganic pollutants including the membranes of pathogenic micro-organisms. TiO2 enhances the effect of UV-C light; with its photocatalyzed effect actively targeting the elimination o

Applied inside ducts, or in the final section of AHU (Air Handling Unit), Retrofit UV In-duct system creates a UVGI barrier that inhibits the proliferation of viruses, bacteria, moulds and spores settling inside Air Conditioning Systems and very dangerous for health. UV-RACK purifies homogeneously the airflow running through its powerful lamps, eliminating the microbial load and the spreading and distribution of dangerous and annoying pathogens inside buildings. In AC systems an unpleasant biofilm covers usually all inner surfaces as the result of microorganisms combination and favourable conditions for their proliferation, such as temperature changes, high humidity and darkness. Retrofit UV-RACK inhibits the creation of this biofilm increasing Indoor Air Quality and comfort. More specifically, the use of retrofit UV-RACK eliminate important issues related to AC Systems and deadly illnesses (such as Legionella Pneumophila, Tuberculosis, Flu, etc.

UV lights are used to make invisible features on products visible. The UV radiation causes certain materials to glow. This glowing is clearly visible to the human eye and cameras. Product labels that consumers find annoying can be applied with transparent, fluorescent ink. However, under UV radiation, the labelling can be made visible for the purposes of inspection. Fluorescent, low-contrast adhesives, paints and seals can be shown in high contrast with ultraviolet radiation. Presence and completeness monitoring is thus made easier for the camera. The finest cracks, such as in cast parts, can be made visible with the aid of fluorescence.

elight Company, Inc. designs, manufactures, and internationally distributes a wide range of high-quality special replacement mercury, gallium, iron and other metal halide bulbs. Also known as ultraviolet curing, drying, or graphics arts lamps. Medium pressure bulbs are used to cure inks and adhesives quickly and consistently. Ultraviolet curing uses less energy than conventional drying methods, and minimizes VOC emissions. We are supplier of quality direct replacement for series of printing equipment and uv ovens ncluding Gallus, Mark Andy, GEW, IST, Brewer, and more. Applications: Adhesive setting CD & DVD curing Exposure Equipment Graphics Arts Printing Inkjet Systems Label Printing Photochemical Lamps & Wells Portable Curing Equipment Printed Circuit Boards Roller Coaters Screen Printing

The benefits of organic macadamia oil are numerous, including : nourishing : this vegetable oil deeply nourishes the skin for maximum hydration. Indeed, it has a good amount of palmitoleic acid, a rather special fatty acid: it is indeed an omega-7, naturally present in membrane lipids. softener : this vegetable oil restores suppleness and elasticity to the skin, thus fighting against skin aging. It also fights against stretch marks and scars. soothing : softening and calming, this vegetable oil relieves damaged and fragile skin. It is widely used to soften hands chapped and cracked by the cold. skin protector : this vegetable oil protects skin cells from external aggressions such as pollution or the sun thanks to its light UV filter. penetrating : this vegetable oil penetrates very easily and quickly into the skin because it is very fluid. It does not leave a greasy feeling and is a perfect massage oil base.

Electrical tapes are used to insulate electrical wires and other materials that conduct electricity. The tape can be used in white goods applications. It is used for coil, capacitor and cable installations. The tape is resistant to UV light, inhibits corrosion of electrical conductors.

As UVC sterilisation becomes more prevalent, Knight Optical can offer UV domes to house LEDs and LED arrays, as well as other light sources. We stock ready-to-order 50mm and 100mm UV fused silica domes with high transmission down to 185nm, meaning it encompasses the traditionally used UVC light sources – KCl excimer lamps (222nm), mercury lamps (254nm) and LEDs (265nm, 273nm and 280nm). Knight Optical can also provide custom domes, including with a flange for easier mounting, manufactured from UV fused silica. Also available are optical coatings to enhance the performance of the dome. Quality Assurance All optical components are tested in our state-of-the-art metrology laboratory to ensure they meet every specification, and then 100% visually inspected by our highly trained quality technicians. Knight Optical prides itself on the quality of our optical components, and you can be confident that our products will fit seamlessly into your UVC system.

Plastic materials may crack under the prolonged exposure to a UV light source… But not Knight Optical’s Dichroic Hot Mirrors! Knight Optical can supply you with high quality and cost effective Dichroic Hot Mirrors for use in optical systems where unwanted UV or IR light negatively impacts on the system quality. This includes UV and IR Sensitive Systems, medical illumination and display fibre optics. Prolonged exposure to UV light can cause degradation in plastic materials resulting in cracking and, eventually, mechanical failure. Exposure to IR can cause undesired thermal energy and heat into the system that can damage delicate components. Dichroic hot mirrors solve this issue by reflecting UV and IR light away from the component, meaning cost We hold a massive inventory of Bandpass, Long pass, Short pass, Band-blocking and Colour-correction filters. For more information Read the PDF...

Knight Optical can offer you Stock and Custom Fresnel Lenses, for concentrated photovoltaic applications in a range of materials such as PMMA Acrylic and Borosilicate. CPV is an application which generates electricity from sunlight. The key difference between this technology and conventional photovoltaics (solar panels) is the inclusion of optical components. Utilising optical components which focuses the sunlight onto solar cells increases the efficiency of the electricity generation. Knight Optical provides fresnel lenses which consist of a flat surface with interspace concentric steps whereby each step corresponds to the surface of a conventional lenses. PMMA Acrylic is a preferred material for CPV systems as it is very lightweight when used in a large size. Specialist grades of PMMA are also utilised which absorb the UV light and thus reduces the effects of solarisation i.e. the yellowing of the optical material due to exposure to UV. Read PDF for full information

The healing properties of light have been revered for thousands of years. Red light is commonly used for its antiaging benefits. The novel active was designed based on this light therapy. Noni Extract based special active absorbs UV light and in turn emits visible red light known to elicit healing benefits on the skin. Thus uses sun to rejuvenate your skin! Increases firmness Evens skin tone Soothes sensitive skin, reduces redness Boosts collagen production, decreases the view of fine lines and wrinkles Decreases roughness, provides luminosity UV Filters Noni Extract Zinc Oxide Titanium Dioxide Niacinamide Sodium Hyaluronate Yeast Amino Acids Nangka Seed Concentrate Ceramides Squalene Panthenol Vitamin E

Our HHC-O acetate is derived from organic hemp extract. Its purity is surprisingly high. This brand new HHC-O vape uses a premium 95% HHC-O acetate infused with a 5% fantastic terpene strain for a natural cannabis experience. Pesticide residues, heavy metals and solvents are tested and passed by third-party laboratories. HHC-O is less viscous than HHC, don't be surprised when you see our PURE distillate oil flow. HHC-O is 1.5 - 2 times higher potency than HHC.  Like Delta-8 THC, HHC-O is produced from hemp-derived CBD. It has a different molecular makeup than Delta-9 , is perfect for user who want more natural experience than Delta-8. Because HHC-O is immune to oxidation, temperature, and UV light, it's the highest stable state of THC, so you don't have to fret about your stockpile decaying and losing its effectiveness.

Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm. Sapphire is birefringent and if its use is for critical optical application then the crystal might have to be cut along the zero degree plane, or C-Cut. Random cut is usually cut along a plane that is 60° off-axis as the growth in this direction is the easiest to grow. Random cut is anything that is not the C-Cut angle. Sapphire can fluoresce depending upon the concentration of other minerals within the lattice, for example Iron (Fe) or Chromium (Cr). Clear Sapphire might fluoresce orange when illuminated by UV light if impurities are in the crystal. Fluorescent free Sapphire has to be grown from 'pure' feedstock and seed and in an environment that cannot place impurities into the lattice. READ MORE ... CLICK LINK

Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm. Sapphire is birefringent and if its use is for critical optical application then the crystal might have to be cut along the zero degree plane, or C-Cut. Random cut is usually cut along a plane that is 60° off-axis as the growth in this direction is the easiest to grow. Random cut is anything that is not the C-Cut angle. Sapphire can fluoresce depending upon the concentration of other minerals within the lattice, for example Iron (Fe) or Chromium (Cr). Clear Sapphire might fluoresce orange when illuminated by UV light if impurities are in the crystal. Fluorescent free Sapphire has to be grown from 'pure' feedstock and seed and in an environment that cannot place impurities into the lattice. Click PDF link to read more …...

solidian GREENWALL façade support is a highstrength, noncorrosive, lightweight solution that will last for generations. Because of the highperformance material with UVresistant finish, GREENWALL is suitable for outdoor and indoor use and can be used freestanding or attached to the building. high strength – designed to withstand harsh conditions such as high and cold temperatures, UV light, wind, and seawater noncorrosive – made from noncorrosive composite lightweight – 4 times lighter than steel minimum maintenance – once applied need little or no maintenance quick installation better indoor climate – protects facade so buildings are cooler in summer and warm in winter. The energy requirement is reduced considerably better air quality – plants generate oxygen and filter dust, pollutants, and even noise two standard colors and e range of colors – pick a color that suits you best

Our ranges of light guides are available in a variety of materials Currently we offer BK7 or equivalent, Sapphire or equivalent and UV Fused Silica light guides, in an assortment of diameters and thicknesses. Light guides serve as the key element in cosmetic laser, or intense pulsed light (IPL) applications. IPL is commonly used for the removal of unwanted hair, as well as a range of other cosmetic applications. IPL applications make use of a variety of wavebands to target different chromophores. For this reason, our custom light guides are available in a choice of materials to suit your waveband requirement. Knight Optical’s custom BK7 or equiv light guides offer high internal reflection to minimize the loss of transmitted light. BK7 or equiv can offer over 90% transmission between 330 and 2000nm, which makes this material an excellent choice for IPL applications used to treat pigmentation Continue to read thePDF

Knight Optical can offer UV Fused Silica Lenses for Flame Detection Applications. UV Fused Silica can be used in Flame Detection Applications, due to its high transmission into the NIR range (approximately <92% avg 400-2000nm) meaning that a clear distinction can be made between different wavelengths of light. UV FS also has a very low coefficient of thermal expansion 0.55x10-6K-1 at 300K) compared to N-BK7 (7.1x10-6K-1), meaning that it can still provide optical performance under high temperature. UV FS also has a high melting point compared to N-BK7, providing further protection for your application in high temperature environments. UV FS is comparable to N-BK7 or other similar optical glasses in its performance, having a very similar average transmission over the VIS range up to approximately 2000nm and a slightly lower refractive index. The Abbe constants of UV FS are also very similar to that of N-BK7, although slightly higher. Read PDF for more info

Dymax UV and visible radiometers are easy to operate and allow operators to monitor and document a UV/Visible light curing process. Features: - Helps lightcuring system maintain consistent intensity and dosage levels - Provides a worker friendly lightcuring process by measuring stray or reflected energy - Measure the light intensity transmission rate through the substrate to ensure an effective cure

Dymax Dual-Cure 9014 encapsulant is formulated to cure primarily with UV light and includes a secondary moisture curing function for applications where shadow areas exist on printed circuit boards. Features: - Cures with UV/Visible light - Dual Cure secondary moisture cure capability - Fluoresces blue under black lights - Flexible

LED SpotCuring System Higherperformance, flexible operation with TouchScreen Interface. Features: - One controller controls up to four LED heads for maximum application flexibility - LED heads for 365, 385, or 405 nm wavelengths for better compatibility with different lightcurable materials - Improved, flexible LED heads can be programmed independently for accurate curing - Individual exposure times and intensity settings available in 1% increments for each LED head allows for maximum curing flexibility - Interchangeable/replaceable focusing lenses in 3, 5, and 8mm diameters that allow tailoring of the unit to your curing requirements - Instant on/off – no warmup period and more energy efficient - Efficient LED temperature management for continuous operation without overheating and comfortable handheld operating temperature - PLC touch screen interface that is easily incorporated into automated systems

HighIntensity lightcuring with patented intensity adjustment technology. Features: - >17,000 mW/cm² initial intensity - Patented intensity adjustment feature - Easy to use and adjust - Easytoread, lighted front panel LCD display - Improved user interface for easier operation - Up to 2,000 hours useful bulb life - Compatible with liquid, fiber, singlepole, or multipole lightguides - Integrate with pedal or PLC - Extended exposure time settings to 9,999.9 seconds - Controlled powerup sequence ensures proper temperature - Integral shutter with digital timer - Fast bulb replacement - Proprietary “Cool Blue™” filter virtually eliminates lightguide degradation - Smooth front panel for easy cleaning

Dymax 9801 is a LED or UV/Visible lightcurable material with superior adhesion properties for bonding camera modules, lidar, active alignment applications. The material cures with UV light but also features heatcure capability for applications where shadowed areas exist. Features: - Fast cure with LED or UV/Visible light - Low temperature heat cure (8085°C) - Moisture resistant - Thermal cycle resistant - Single component - Cold ship/Cold storage at 15°C - Passes ASTM E595 Outgassing Testing

Low shrinkage optical positioning Epoxy with LED and heatcure capability. Features: - Fast cure with LED or UV/Visible light - Low temperature heat cure (8085°C) - Low shrinkage and CTE - Single component - Cold ship/Cold storage at 15°C - Passes ASTM E595 Outgassing Testing

Features: - Fast cure with LED (385 nm) or UV/Visible light - See Cure dispenses blue, cures clear - UltraRed® fluoresces bright red - One part formulation - No nonreactive solvents - Compliant with ISO 10993

Maximize performance with UV reflectors For ultraviolet light reflectivity, manufacturers trust our POREX® Virtek™ sintered PTFE sheets and molded 3-D parts. With over 97% average reflectance from 250nm to 400nm, POREX Virtek™ pure PTFE reflectors can maximize disinfection rates and minimize system cost. Specifically designed for UV systems, our UV reflectors: Eliminate hot and cold spots – POREX® Virtek™ PTFE scatters light in all directions, spreading UV light evenly across a surface and eliminating cold spots where bacteria may survive. Maximize lighting efficacy – With over 97% average reflectance from 220nm to 400nm, less light is lost to absorption. Maintain performance in high temperatures – Working temperature of POREX Virtek™ PTFE is 260ºC.

Objects exposed to weathering such as UV light, air pollution and temperature fluctuations often have to endure a lot. Our solutions extend the life of any object and material type, both indoors and outdoors. By protecting objects permanently and preventively, they stay cleaner, longer in new condition, the life span is extended and you save on costs, think of TCO. Aging, discoloration and deterioration caused by contaminants such as algae, mosses, fungi or air pollution is prevented. We are looking for distributors with a B2B network. This way, we can realise a green footprint together.

Objects exposed to weathering such as UV light, air pollution and temperature fluctuations often have to endure a lot. Our system extend the life of any object and material type, both indoors and outdoors. By protecting objects permanently and preventively, they stay cleaner, longer in new condition, the life span is extended and you save on costs, think of TCO. Aging, discoloration and deterioration caused by contaminants such as algae, mosses, fungi or air pollution is prevented. We are looking for distributors with a B2B network. This way, we can realise a green footprint together.

Objects exposed to weathering such as UV light and temperature fluctuations often have to endure a lot. But also pollution in the air, in or around factory plants are contributing in a bad way. This complete restoring system ensures the lifespand for many years to come. By protecting objects permanently and preventively, they stay cleaner, longer in new condition, the life span is extended and you save on costs, think of TCO. We are looking for distributors with a B2B network. This way, we can realise a green footprint together.

Therapy Air® Smart is the latest generation of the most effective air purification systems that combines proven HEPA technology with the power of negative Ions and UV-C light. This all-in-one filtration system removes 99.9% of harmful particulates, pathogens and polluting gasses from air. Presentation Therapy Air® Smart uses 360° multi-stage filtration system which allows purified air to be quickly distributed in all corners of the 71m2 indoor space. Thanks to its three-dimensional circulation system, the air will be purified no matter where you place the device. How It Works? Therapy Air® Smart uses short- wave UV-C light of 265-315 nm which splits the RNA/DNA material in the cell nucleus of microorganisms, making them unable to live and reproduce. The UV light mimics the antimicrobial power of sunlight and instead of filtering, completely eradicates mould spores and pathogens.​ A Perfect Balance of Superior Technology and Sophisticated Design for the 99.9% Clean Air.