Used forklift - Import export

Make your forklift even more flexible with the a secutex prong protection coil. After you have secured everything for careful transport, back the lift prongs out of the secutex prongs protection coil and continue to use the forklift normally. Mounting various prongs can be omitted. The secutex prong protection coil is carried by both prongs. The secutex protective coating avoids material damage and prevents the coils from slipping.

PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.

Load capacity: 400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation heights: up...

TIPPING BUCKET FOR MOVING SAND OR SNOW New bucket made with sturdy steel structure and high load capacity which makes it suitable for handling materials such as rubble, earth, sand, gravel, snow, fertilizers, grains etc., using a forklift. The automatic tipping is practical and safe, in fact, without getting off the elevator, the operator can operate the spring release system using a practical rope. TECHNICAL FEATURES: - Thick blade, welded on the bottom - Sturdy shovels for forking by forklift or vehicles equipped with forks - Two spring clips to cushion strong blows during unloading - Two-component acrylic water-based painting Red Ral 3000

We manufacture containers of 20 feet or 40 feet or custom-made flat pack container to create office and various workspaces. Affordable flat pack office container UK for you worksite workers. Assembly of our flat pack office container UK in 2 hours' We load up to 10 pcs flat pack modular office container. WHY CHOOSE THE FLAT PACK MODULAR CONTAINER? : - QUICK ASSEMBLY - AFFORDABLE PRICE - FULLY INSULATED (FLOOR-CEILING-WALLS) -CUSTOM MADE FLAT PACK MODULAR CONTAINER UK - MANY OPTIONS (HEATING - AIR CONDITIONING-CUSTOM ALUMINUM DOOR AND WINDOW) - EASILY MOVED BY LIFTING AND FORKLIFT Contact us for your quote requests.

Scope of delivery: 1x ball unit table 6x freely positionalable stop bar – long 4x freely positionalable stop bar – short 1x set of bolts anti-tilting Load capacity for tools, dies, injection moulding tools, assembly goods etc. up to: 500 kg – higher loads possible with ball units 022.100 Purposes Setup and dismantling, internal transport, flexible work table e.g. in toolmaking, can be used for forklift trucks, pallet trucks or pallet jacks Advantages Reduced set-up time, safe, flexible, universally applicable, simple and fast handling Safety at work flexible fall protection for conveyed goods, simple and quick tilt protection, stop bars freely positionable in the grid The SUTTY has a CE mark – Quality, made by Schulz!

Our patented solution is an indispensable part of warehouse technology and has frequently proved itself in many areas, such as in high-bay warehouses, hazardous substance warehouses, cleanrooms, quarantine warehouses and conveying systems. These bolted aluminium pallets are outstandingly easy to maintain. Damaged parts, e.g. rungs, can be rapidly and conveniently replaced using conventional tools. Their great stability makes them ideal for use on roller conveyors and in high-rack warehouses. The aluminium pallets are resistant to temperature fluctuations and can be used in all weathers. Of course, they are also suitable for use with forklift trucks, are durable and corrosion-proof and have a load capacity of up to 1000 kg per pallet. We will gladly manufacture them to the bespoke size of your choice. P 800 and P 1000 - Aluminium Pallets - screwed P 800 and P 1000 - Aluminium Pallets - welded Jack-of-all-trades - the aluminium pallet - screwed Pallet made from extremely...

Loader ZZ-120 loads any kind of grain, granules, pellets, etc. in any wagons and containers. Loader capacity up to 120 tons per hour. The flight range of the grain is up to 20 meters, the height is up to 9 meters and is regulated in 1 second. Grain loader ZZ-120 can rotate around 360 degrees. This allows you to load grain and other bulk cargo into wagons and containers of any length and height. The ZZ-120 grain loader consists of a trimmer with a support and an electric motor, a special trimmer pipe and a control panel. Electricity consumption for loading 1 ton of grain is only 0.046 kWh. A frequency converter can be additionally mounted in the control panel, which provides additional opportunities for regulating the range and height of the flight of grain. Unlike FulFiller container loading system, there is no need to hook the ZZ-120 grain loader directly onto the container itself using a forklift.

This container is designed for storing and transporting waste and products intended for recycling. The feet are designed so that it can be tipped using the forks of a forklift truck.

In narrow aisle racking systems, the aisles are narrowed in order to use the storage volume horizontally and more efficiently. Many factors are highly important in choice of narrow aisle racks. These are the type of material to be stacked, the type of forklift to be used, the storage speed and the importance of the storage floor. In the narrow aisle racking system, there are guide rails fixed to the sides of the aisles. Inductively system installed inside the base (electronic tracking system) through the stacking method is made ready for use. Narrow aisle racks have many advantages. Stacked material is the first of these to provide fast and direct access. The fact that the circulation of materials can be done quickly and used to the maximum level from the storage area is among other advantages.

The CLAD-LIFT 350TH is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The Clad-Lift 350TH ( „TH“ for „telehandlers“ ) is a special version that can be attached to telehandlers or forklifts. The window mounting device for telescope crane and forklift Examples of use: Technical Data Article No. 1020170 Max. Extension Lifting Beam ( horizontal ): 790 mm Outer length: 1.850 mm Max. Height to the center of the lifting yoke 2.700 mm Outer width: 840 mm Max. Height to center of lifting yoke: 100 mm Max. Lifting capacity: approx 350 kg Tower fine adjustment ( hydraulic ): 500 mm Max. Load at maximum extension: 200 kg Batteries: 2 x 95 Ah Max. Last bei seitlichem Transport 200 kg Rotation 360° Weight: 423 kg Suction plates: 6 x Ø 270 mm Minimum Extension: 290 mm

-sturdy frame made of steel tubing -loading surface 30 mm softwood timber -rotating assembly with fork sleeves and feature to prevent slipping -2 supporting feet -2 heavy duty wheels Ø 300 x 100 mm Individual construction on request e.g. superstructures such as additional plug-in level, stakes, side walls, shelving, retention basins

The stack of boards needs to be separated again for the subsequent processes. Siempelkamp provides process-reliable, dependable solutions for all products and board properties here. Features and functions Stack feeding using forklift trucks, aisle vehicles or conveyors Board separation and feeding from the stack by the highly dynamic Siempelkamp feeding system. Advantages Absolutely process-reliable for all products (e.g. MDF, particleboard, OSB), board thicknesses and lengths irrespective of the width Variants, options Buer for interruption-free feeding during stack changes Protection board handling.

-sturdy steel construction -fork sleeves for pick-up using forks -suitable for forklift trucks, site Dumpers and other vehicles with forks -can be secured to prevent slipping and unintentional emptying -self-locking hooks hold the wheelie bin -securely in place during emptying

The boards to be coated are fed to the raw-board-handling section where they are separated to allow their surfaces to be cleaned. Features, function A forklift truck is used to place the board stacks on to a roller table from where roller conveyors or horizontal transfer carriages equipped with roller conveyors transport them to one of the two separating station's places. A suction carriage removes the top board from the stack and places it on a conveyor that takes it to the surface-cleaning machine. Advantages The two redundant stacking places allow the short-cycle press to be supplied without interruption. They make it possible to feed new stacks of boards without the need to shut the machine down

ZIM T 1220 machine is designed to produce pipes. It uses forklifts to transport concrete pipes and it makes the production cycle shorter. Also it has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm – 2000mm height. The machine can be designed for producing single, double and triple pipe in a press. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibration system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs.

This machine has been designed in order to produce high quality of interlocks, blocks,curbstones and other concrete products as requested by the customer. One press can produce 42pcs of interlocks or 18 pcs from blocks 20x40x20cm block and curbstones. The machine can be used with a stacking system or without stacking system. The press time is 20-24 seconds. It has two working system, it can work either full automatic or semi automatic depending on user preference. Movements on the system will be controlled by a PLC. Auto motion system via sensors in automatic machine. Machine press number, unit of productions, problems on the machine can be seen on the PLC touch screen panel. The stacked Pallet must be transported using a forklift for machines with a stacking system. The machine works on wooden pallets which are made of pine wood. There are two types of mortar preparation system it can be either manual or with automatic weighing system after the cement is dosed sand is been weighed.

Each year around two thousand accidents and ten fatalities are reported due to forklift operation in the United Kingdom. That's approximately forty serious injuries caused by a forklift every single week! Carrying out daily inspections of a forklift with Good to Go Safety's inspections checklist will significantly reduce the risk of accidents and any unnecessary maintenance costs to forklifts. Good to Go Safety offers a simple solution for forklift inspections management with a flexible inspection checklist system that can be used on a pre-use ad-hoc, daily or weekly basis to suit your companies needs. Completing pre-use forklift inspections as part of your FLT (Forklift Truck) safety maintenance programme ensures both employee and visitors are aware of the forklifts trucks status at all times. Upon completion of the forklift inspection, the forklift checklist is inserted into the tag to display the inspection findings and date of completion, removing the risk of assumption.

IdentPro’s AMRs are revolutionizing intralogistics. The fully autonomous transport robots (Autonomous Mobile Robot, AMR) were developed to meet the requirements of collaborative use with manual forklifts. The AMRs serve any source/sink and – optionally through an integration in the Warehouse Execution System – enable scan-free, end-to-end pallet tracking. These can be used stand-alone or integrated into the overall warehouse optimization via the Warehouse Execution System. identpro® AMR works on repetitive tasks as well as it collaborates with manned lift trucks in a highly flexible manner. In-process battery charging allows for true 24/7 operation.