Tube support - Import export

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Maximize filtration efficiency and structural integrity POREX® media support tubes, sleeves, outer wraps and cores improve the filtration and structural integrity of water filtration cartridges. Specifically designed for drinking water applications, our media support tubes: Extend primary filter lifespan–Removal of carbon fines, dirt, rust and sediment extends the primary filter lifespan, including carbon blocks and RO filtration. Maximize flow and filtration efficiency–Structural integrity of porous tubes maximizes efficiency while removing sediment. Enhance filtration – Ability to tightly pack media into tubes prevents poor filtration due to channeling.

SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.

METAL DETECTOR WITH ROUND APERTURE FOR THE INSTALLATION IN PIPES. Detects all metals encapsulated or as loose parts. Highest sensitivity even in rough industrial environments. User friendly and reliable technology, proven for many years. Used for quality contral or machine protection. Specifically tailored system solutions with sensing tubes and support frames.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement. Different support arms, swivel arms and telescopic support arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement.

Pyrolytic boron nitride is a grade of hexagonal boron nitride. It is produced by chemical vapor deposition process to create its solid body and all the boron nitride crystals grow parallel to the surface of which the vapor is deposited on. Due to the nature of CVD process, PBN parts generally are requested the wall thickness not more than 3mm. PBN is also a good choice for extremely high purity of boron nitride. 99.99% is the typical grade. The CVD process give this pyrolytic boron nitride almost perfect layered structure, which leads to anisotropic thermal conductivity, making it an ideal material to make crucibles for crystal growing. PBN Ceramic Applications： -Crystal growth (VGF, LEC Crucible) -Molecular Beam Epitaxy(MBE) Crucible -MOCVD Heater -PBN Infrared Window -Traveling Wave Tube (TWT) (PBN Support Rod) -PBN Coating Graphite -High temperature, vacuum equipment insulator

Porous ceramic rods description: Porous ceramic filter rods are composed by the distributed evenly open pores which is interconnected by shape like arch , when the fluid through these pores,the suspended matter, colloidal particles, organic molecules are trapped, adsorbed inside the micropores,then track to achieve the purification and filtration homogenizing effect. The porous ceramic has the advatage with high strength, wear resistance, high temperature, corrosion, pollution, porosity distribution, long service life and easy to regenerate, which is particularly suitable for a variety of gas, liquid filtration and fluidized process. * Good electrical insulation * High dimensional tolerances * Excellent corrosion resistance * Very high working temperatures * Excellent thermal shock properties Applications of Alumina Porous Ceramic * Furnace work tubes * Kiln furniture, components & accessories * Thermocouple protection tubes * Heater Support Elements

Porous ceramic plate is composed by the distributed evenly open pores which is interconnected by shape like arch , when the fluid through these pores,the suspended matter, colloidal particles, organic molecules are trapped, adsorbed inside the micropores,then track to achieve the purification and filtration homogenizing effect. The porous ceramic has the advatage with high strength, wear resistance, high temperature, corrosion, pollution, porosity distribution, long service life and easy to regenerate, which is particularly suitable for a variety of gas, liquid filtration and fluidized process. Applications of Alumina Porous Ceramic * Furnace work tubes * Kiln furniture, components & accessories * Thermocouple protection tubes * Heater Support Elements * High Temperature Electrical Insulators * Extreme temperature measurement components * Ceramic Laser components * High voltage electrical insulators

Mechanically durable and thermally shock resistant, PBN/PG heaters are unaffected by vibration under most conditions and can be tailored to thermal gradients for specific requirements. With an ultra-fast response and low thermal mass, PBN/PG heaters demonstrate a power output of 35 watts/cm 2 (225 watts/in 2 ) and higher.Size customization, please let me know the use temperature, current and voltage. -Crystal growth (VGF, LEC Crucible) -Molecular Beam Epitaxy(MBE) Crucible -MOCVD Heater -PBN Infrared Window -Traveling Wave Tube (TWT) (PBN Support Rod) -PBN Coating Graphite -High temperature, vacuum equipment insulator

Pyrolytic boron nitride is a grade of hexagonal boron nitride. It is produced by chemical vapor deposition process to create its solid body and all the boron nitride crystals grow parallel to the surface of which the vapor is deposited on. Due to the nature of CVD process, PBN parts generally are requested the wall thickness not more than 3mm. PBN is also a good choice for extremely high purity of boron nitride. 99.99% is the typical grade. The CVD process give this pyrolytic boron nitride almost perfect layered structure, which leads to nisotropic thermal conductivity, making it an ideal material to make crucibles for crystal growing. PBN Ceramic Applications： -Crystal growth (VGF, LEC Crucible) -Molecular Beam Epitaxy(MBE) Crucible -MOCVD Heater -PBN Infrared Window -Traveling Wave Tube (TWT) (PBN Support Rod) -PBN Coating Graphite -High temperature, vacuum equipment insulator

Due to the nature of the CVD process, PBN parts generally are requested a wall thickness not more than 3mm. PBN is also a good choice for the extremely high purity of boron nitride. 99.99% is the typical grade. The CVD process gives this pyrolytic boron nitride an almost perfect layered structure, which leads to anisotropic thermal conductivity, making it an ideal material to make crucibles for crystal growing. Pyrolytic Boron Nitride Applications: Crystal growth (VGF, LEC Crucible) Molecular Beam Epitaxy(MBE) Crucible MOCVD Heater PBN Infrared Window Traveling Wave Tube (TWT) (PBN Support Rod) PBN Coating Graphite High temperature, vacuum equipment insulator

The world's largest motorized screen, up to 60m wide! From 8 to 60m wide. The black anodised extruded aluminium housing is fitted with longitudinal steel reinforcements that provide it's great rigidity. Aluminum roller tube supported along its entire length by a cradle made up of ball bearings and FLEX system.Tubular anti-bending system over the entire length. Color of the casing: black anodized. Installation onto a fixed theater pipe 48,3 to 50mm diameter (other fixing method on request). Tab Tensioned Screen Surface (optional). Most of our PVC fabrics can be fitted into this system. Integrated motorization 220V 2 Somfy motors with 5 years warranty. Motor torque: 110 Nm. Rotation speed: 17 revs/min. Rising speed: +/- 10 cm/sec. Equipped with 2 adjustable end stops. The Nolimit can be shipped in one piece up to a maximum of 12 metres wide, in a wooden box especially provided for this purpose.

Air cooled aftercoolers series ACA are designed to reduce compressed air temperature and water vapour dew point in compressed air system. High efficiency axial fan forces ambient air over the heat exchangers copper tubes supported by aluminium fins, which provides the necessary cooling effect. The compressed air is cooled down to approximately 10°C above ambient temperature. ACA aftercoolers ensures the maximum performance and protection of all equipment, such refrigeration dryers, adsorption dryers and filters, positioned downstream of this unit.

The type SFO-F tube forming machine facilitates the economical and most reliable production of tube ends made of steel, stainless steel and other materials with a contour typical for the STAUFF Form tube forming system. The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with FI-FST tube shapers and FI-FB clamping jaws. Tube shapers with FI-ID internal tube supports are used with selected tube dimensions, which prevent the tube from being constricted in the shaping area. Tube shapers, clamping jaws and internal tube supports have been specifically designed for the mechanical forming process and can be quickly and simply replaced without the need for any tools, if required. The resulting short tool change and set-up times contribute to the high efficiency of the system as well as ensuring low cycle times. All the tools needed for the forming process are clearly labelled with the tube dimensions so that assembly...

TL 8525 is a high-capacity tube laser cutting machine designed for top productivity. It handles lengths up to 8500 mm and diameters up to 250 mm round or square. The TL 8525 comes equipped with leading-edge features, including a 45-degree tilt-axis cutting head with NC-Focus, 6-position front loader, 2 kW IPG fiber laser, and a large X-axis cutting head range of 1190 mm to maximize material usage. KEY FEATURES Accommodates tube and profile lengths up to 8500 mm, diameters up to 250 mm High-performance cutting head with NC-Focus and bevel function +/- 45 degrees Magazine style 6-position automatic tube load system Leading edge detection for variable tube lengths Automatic bow detection and compensation system Automatic twist compensation system Outfeed tube support with accompanying conveyor table Siemens CNC control is PC-based with touchscreen PERFORMANCE-ENHANCING OPTIONS 4 kW fiber laser source 6100 mm outfeed extension Part evacuation conveyor Automatic weld seam detection

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

Reinforce your ABS Weight OnTop Double anchorage device with this optional supporting tube (Ø 42 mm) to withstand the increased tension exerted on the corner and end supports in a lifeline system. This device comes with an extra energy absorber. Supporting tube for Ø 16 mm posts Required for usage as a corner or end post in a lifeline system Includes an energy absorber

Upgrade your ABS-Lock X anchorage point for usage as a corner or end support in a lifeline system. This additional stainless steel reinforcement (Ø 42 mm) includes an energy absorber and is capable of withstanding the pre-tensioning load exerted on your stainless steel cable. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end support in a lifeline system Includes an energy absorber

To prevent an ABS-Lock III anchorage point from being accidentally bent during the pre-tensioning process, it can be reinforced using one of our specially designed stainless steel ABS-Lock III Supporting Tubes (Ø 42 mm). Simply contact us to check whether your anchorage point can be upgraded prior to installation. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end post in a lifeline system Includes an energy absorber

This stainless steel anchorage point (Ø 16 mm) for steel surfaces is reinforced through a special supporting tube (Ø 42 mm). You can either use it as a single anchorage point or integrate it into a lifeline system. It is installed laterally using the angular plate supplied and then countered using 2 threaded bolts and corresponding nuts. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Installation materials included

This reinforced, stainless steel anchorage point (Ø 16 mm) comes with a special supporting tube (Ø 42 mm) and includes an angular plate for lateral installation. Simply drill 2 holes through a load-bearing beam to install it. Our standard package includes threaded bolts and nuts for countering. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Designed for load-bearing wooden structures Minimum beam dimensions: 100 mm x 200 mm Incl. stainless steel installation set

This stainless steel anchorage point (Ø 16 mm) is attached laterally to a concrete surface. It is reinforced by screwing on the supporting tube supplied (Ø 42 mm) - making it ideal for usage as a stronge support in a lifeline system. Our standard package includes 2 anchor rods and an angular plate - all made of stainless steel material. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

Simply install this stainless steel anchorage point - which includes a welded-on supporting tube (Ø 42 mm) - on a pitched roof surface. The flexible crossbar, which is screwed onto a wooden beam, allows you to adjust it according to the roof pitch. It is installed using the 4 stainless steel screws supplied and then sealed up using a standard antenna tile. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 60 mm x 120 mm Adjustable angle and crossbar position Installation materials included

Thanks to its base plate (150 x 150 mm) and welded-on supporting tube (Ø 42 mm), this stainless steel anchorage point offers plenty of stability when used in a lifeline system installed in a concrete hollow core slab ceiling. Simply install the anchor on the substructure using the 4 slab expansion anchors supplied. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2017 Base plate + welded-on supporting tube Designed for concrete hollow core slab ceilings ≥ C45/55 (B55) Web depth min. 25mm Installed using 4 expansion dowels Can be installed in cavities and solid material

This stainless steel anchorage point, which comes with a base plate (150 x 150 mm), has been approved by the German Institute for Construction Technology ("DIBt"). It is installed on a steel structure and countered on the other side. The welded-on supporting tube (Ø 42 mm) easily withstands the pre-tensioning stress to which it is subjected when used in a lifeline system. Our standard package includes a set of installation materials. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Incl.stainless steel installation set

This reinforced, stainless steel anchorage point - designed for concrete applications - does not create any tension in the substructure and is suitable for unprotected surfaces. It includes a base plate (150 x 150 mm) and a welded-on supporting tube (Ø 42 mm) for extra stability and is installed using the 4 anchor rods supplied. All you need is an installation depth of a mere 60 mm. EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Concrete ≥ C20/25 For installation depths ≥ 60mm Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

Thanks to its base plate (150 x 150 mm) and welded-on supporting tube (Ø 42 mm), this anchorage point offers a high level of stability when installed on a concrete structure - even with an installation depth of a mere 65 mm. This anchor - which has been awarded national technical approval - is easily installed using the 4 drive-in dowels supplied. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Concrete ≥ C20/25 For installation depths ≥ 65mm Incl. stainless steel installation set

This stainless steel anchorage point, which can be used by one individual for abseiling purposes, comes with an extra-thick base plate (150 x 150 mm) and a welded-on supporting tube (Ø 42 mm). It is simply embedded in concrete using the 4 drive-in dowels supplied. EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Designed for C20/25 concrete ≥ 120 mm For installation depths ≥ 70 mm Secures up to 3 individuals Suitable for usage by 1 individual for recurrent abseiling work Incl. stainless steel installation set