Transport of paints and varnishes - Import export

USE : Compulsory Protection for Operating Agents on track, it provides warning of the arrival of train on adjacent track, running at normal Speed. ADVANTAGES : Highly Safe and Efficient Equipment. ( CO MPULSORY for all Track Works ) * 1 tone Manual Warning Signal (V.A. Model) - Ref. 1034-1 - Sound Power = 110 dB to 5 m - Frequency = 388 Hz - Operating Pressure = from 3 to 8 bars - Tank Capacity = 8 Litres The Complete Device includes : - 1 Hand Pump - 1 Air Tank with pressure Gauge - 1 Call Button - 1 Transport Rubber Wheel - Paint yellow varnish - Weight = 16 Kg * 2 tones Manual Warning Signal - Ref. 1034-2 OTHERS WARNING SIGNALS * Lightweight Warning Signal Type T : - With Direct Operating Lever - Sound Power 118 db to 5 m - Paint yellow varnish - Weight = 7 Kg * Warning with Gaz - Ref. AVP - Sound Power : 113 db to 3 m / 110 db to 5 m - Weight = 0.5 Kg * Horn (Type SNCF) - Ref. 1038 - Weight = 0.3 Kg This Material is part of Set of Security - SEC-1

The company possess with two lines for powder coating, in which can be manufacture products with maximum dimensions 1000x2000x600 mm. We also make a wet painting.

We provide painting of small parts using pressure guns and paint booths. We can also prepare the surface of products before the next production process - sanding, degreasing, intermediate coatings. We provide sandblasting of small-sized items. Max.50x50cm.

Thermo-insulating, anti-condensation, sound absorbing, anti-mould water-based paints for interiors Base of special acrylic resins, hollow glass beads and fungicide additives with wide spectrum of action. super Opaque, thixotropic, breathable, excellent whiteness, resistance to alkali and washing. Thanks to the special composition, which gives the product the mould characteristics and low thermal conductivity, is specified for the definitive resolution of all phenomena related to the failure or bad thermal insulation of walls, ceilings and Particulars of thermal bridges, like phenomena of condensation and phenomena of formation of moulds or mushrooms. Color: white Package: Trunk 4-14 LT Usage: Internal Yield: 2.8/3.2 sqm/lt dry thickness 300 micron Dilution: From 15% to 25% by weight with clean water • Roller ready to use Recommended application thickness: 300 micron dry

Type: State of-art formula with an excellent adhesion to untreated and pre-treated polypropylene and polyethylene rigid sheets and injection mouldings. Features: •Yields satin finish with excellent film formation •Can be topcoated with gloss or mat varnish •Outstanding adhesion strength •Resistant to most industrial chemicals •Excellent scuff resistance •Resistant to bleach, detergents, alkalis, battery acid, amid motor oils Use: Use on interior & exterior applications Pack Size 400ml. - Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: Medium Touch Dry: 10 mnt. Colour 35 different shades of Ral colors

Type: Semi-matt, opaque metallic effects designed to be used as rich decorative colors in exterior & interior applications Features •Highly vivid, rich, micronised colors •Reflecting metallic beauty •5 Year maintenance cycle •Excellent resistance to uv radiation •Microporous and water-repellent •Very easy application & maintenance Use: Elegant topcoat finish for all decorative applications Exception: Not recommended on rigid polyolefins Pack Size 400ml.-800ml. - Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: High Touch Dry: 10 mnt. Colour 70 different shades of Metallic Ral colors

Type: A high solids, high pressure, solvent - borne graffiti art spray that gives a transculent gloss finish with a selection of opaque / vivid colors Features • Excellent even coverage • Quick dry • High pressure nozzle capability • Outstanding colour retention • Easy to apply and achieve even finish • Suitable to apply on damaged surfaces Use: Interior and exterior use Exception: Not recommended on rigid polyolefins Pack Size 400ml Coverage: 400ml./3.5m2 Glossy Level: High Touch Dry: 10 mnt. Colour 22 different shades of Ral colors

Type: A durable, flexible solvent - borne acrylic / vinly paint with good opacity that provides high gloss finish. Features • Superior gloss • Excellent surface levelling • Smooth polymeric finish • Excellent flexibility • Indoor & Outdoor use A durable, flexible solvent - borne acrylic / vinly paint with good opacity that provides high gloss finish. Interior - Exterior use Not recommended on rigid polyolefins Exception: Not recommended on rigid polyolefins Pack Size 400ml.-800ml. - Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: High Touch Dry: 10 mnt. Colour 180 different shades of Ral colors

concrete, screed,galvanized steel, aluminum, etc. surfaces. It is highly resistant to the atmospheric conditions and can be produced as transparent or colored. It has excellent water resistance as well as high chemical and physical resistance. It is a two-component product that can be used for waterproofing as well as decoration. It is not affected by UV and weather conditions. Yellowing, fading or lifting off over time does not occur. Especially in solving insulation problems arising on the floors such as balconies, terraces, bathrooms, pools, etc., it is easily applied without defecting and damaging the existing coating. AREAS OF USAGE: • Glass, glass brick, mosaic, terrazzo tiles, • Tiles, ceramic, marble, granite, natural stone, porcelain surfaces • Travertine, pressed bricks, • PVC, aluminum, galvanized steel, wood, • Balcony, terrace, bathroom, kitchen, stone covered exteriors.

ISONEM THERMAL PAINT is special high performance paint containing special vacuumed microspheres that are elastomeric resin based, have vapor permeability with low heat conductivity, high solar radiation absorptivity and high surface heat transmittance values and provide interior and exterior heat and water insulation. Its effectiveness has been proved scientifically. Depending on the applied number of coats, it provides energy savings up to 40% in the heating and cooling energy costs of buildings. When the ISONEM THERMAL PAINT with special vacuum microspheres is used as interior wall paint, the radiant heat that is generated inside is reflected to the interior environment. When it is used on the exterior, the incoming radiant heat is reflected back to the outside. ISONEM THERMAL PAINT FEATURES: •Radiant heat proof, •Provides energy savings up to 40%, •Applicable to indoor and outdoor surfaces, •Low labor costs, easy and short application, •Prevents moisture and mold formation

TM Delfi is represented by alkyd products with quality characteristics, which meet the Standard Class. The following production is widely used in all spheres such as household usage, building and industrial ones. The paint products are recognized by their rich colors, protective and decorative features, hardness and washability with domestic detergents. They protect the surfaces from rust, aggressive effects of nature. They have a wide range of colors.

ISONEM ANTI SOUND PAINT, the acoustic paint which is used to stop and reduce sounds, is designed to absorb and isolate the sound in the best possible way. According to the measurement and analysis carried out in conformity with the TS 140-s Standart; It has been certified in Türkak approved accrediting laboratoires, that the applied paint reduces and absorbs the sound level 2,51 dB as regards to 1000Hz, when applied as a 1 mm thick layer and it reduces and absorbs the sound level 4,85 dB as regards to 1000Hz, when applied as a 2mm thick layer, in the 1/3 octave frequency band. The paint is water based. It can be manufactured in any color specified. In addition to its sound isolation properties, it is resistant to fires whit its delayed flammability and non-flammability properties. It is suitable for using to reduce sound levels in any place with sound level problems. PLACES OF USE: • Apartments, • Engine and Machine Rooms, • Disco and entertainment venues, • Cinemas and theatres

Rubber paint TM “Farbex” is intended for protective and decorative coating of tile, ondulin, zinced steel, aluminum, undercoated and non-undercoated iron, profiled sheeting, asphalt, cement, concrete, foam- and gas-concrete, brick, plastered surfaces, plywood, MDF, wood chip panels, wooden and gypsum panels, surfaces covered with wallpaper and alike. The paint can be applied on the surfaces, previously coated with alkyd and oily paints indoors and outdoors.

Type: A hard, protective, natural wood stain colors that offers exceptionally long lasting beauty of wood surfaces subject to UV light, moisture, wear and abuse Features •Enriches the natural beauty of wood •Wide range of natural colors •Protection from abrasion, water, alcohol, cleaners and stain •Available in high gloss and natural satin finish •Satin finish yields excellent rich hand rubbed appearance •Transparent wood grains show through •Deep penetrating formula •Quick dries to a completiy dust-free surface •Easy one coat spray application Use: Use on smooth pressure treated wood interior & exterior Exception: Not recommended on any surfaces except wood Pack Size 400ml.- Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: Medium Touch Dry: 10 mnt. Colour 14 different shades of Wood colors