Transport and removals - Import export

In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor: This means your expensive machine tool cannot attain its full productive potential. The key challenge here is therefore: PROCESS RELIABILITY But there is another way. In fact, there are several proven solutions – centralised and decentralised – to this problem. ERDWICH machines and plant for swarf shredding and processing offer the highest levels of economic viability, safety and efficiency. With the decentralised solution, the ERDWICH swarf breaker is set up directly next to the lathe or machining centre. The swarf is removed and transported away to a central processing point either manually using a swarf cart or by means of pneumatic extraction, pumping or some other conveyor system. With the centralised solution, the swarf is collected in swarf carts at each machining centre and then transported to the ERDWICH master processing plant. This...

Tyrolit’s tungsten carbide burrs can machine materials like steel, stainless steel, non-ferrous metals, cast iron, and HSS. They come in various shapes and profiles, including tapered, cylindrical, ball-shaped, and special designs for angles, corners, and flutes. The parts are soldered with a copper alloy for impact resistance, enhancing safety and performance. Our burrs ensure first-class grinding with maximum economy, featuring long tool life due to a specially developed cutting edge geometry. The aggressive cutter profile allows for significant material removal in a short time, with reduced heat generation to protect both tool and workpiece, crucial for stainless steel to prevent discoloration. The new HPC-coated tungsten carbide burrs for cast iron, steel, and stainless steel offer higher performance, longer life, and better results. The advanced coating improves chip transport and doubles stock removal, with a distinctive Tyrolit color combination.

The lifting platforms HW-C series are lifting equipment to be installed in a fixed position and are driven by a hydraulic power pack. Manufactured according to the accident prevention, they consist of two platforms (upper and lower) and a pantograph system actuated by a hydraulic cylinder. The HW-C series is characterized by the perimeter protection bellows. Main Features: Very strong structure in painted steel Construction according to CE safety standards Upper platform in smooth metal sheet Perimeter protection bellows Hydraulic unit of European production, positioned internally, designed for intermittent use by 30% Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Antishearing safety distance between the arms of the pantograph Joints with self-lubricating bushings Lifting hooks removable for transportation and installation

Lifting platform HY 1001 pantograph with low profile. Also included in the price is the access ramp of 1200 mm length, for the discharge and the load by pallet truck. Features: Structure in high thickness sheet steel with high thickness Construction according to European safety standards Electrohydraulic control unit positioned externally Keypad with protection IP 54 positioned on the hydraulic power pack Security perimeter aluminum on the upper platform Hydraulic power unit designed for intermittent use by 30%. Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Joints with self-lubricating bushings Lifting hooks removable for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Access ramp length 1200 mm for pallet truck

Shrink disc to connect a hollow hub to a shaft. They are mounted on the OD of the hub and generate pressure on the hub wall by reducing the ID with wedgeformed rings, creating a press fit between the hub and shaft. They are suitable for static, dynamic and shock loads. for extremely high torques no axial shaft/hub offset when assembling selfcentring The version 23380014072 has high tensile ISO 4762 screws. Assembly Remove existing transportation locks. Clean and lightly oil shaft, internal and external hub diameters. Do not use MoS2 or grease. Slide shrink disc onto hub. Then slide unit (shrink disc/hub) onto shaft and position correctly. Gently tighten clamping screws one after the other by hand. Then use a torque wrench to tighten the clamping screws crosswise in several increments to the defined tightening torque MS. 1st increment approx. 33% MS 2nd increment approx. 66% MS

1000 Kg Hay Capacity, 2 Axle, Hay Container The feature that distinguishes our AOT 509 model from the AOT 508 is that the closed part of our AOT 509 model is portable and can be disassembled. After the hay and silage are transported, the upper part can be removed and the remaining part can be used as a 5 ton trailer. Trailer axles are closed hub system and do not require lubrication for many years. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit.

For the conveying of filtered-out materials to silos or containers. Pneumatic low-pressure conveyor systems For the conveying of filtered-out materials to silos or containers and for conveying distances of up to 200 m. The conveying air stream is generated by one or more fans. Product description Pneumatic low-pressure conveyor systems can be implemented as a single-pipe system or a ring system. In the case of the single-pipe system, a final separator in the form of a filter or a cyclone is always necessary. In a ring system the conveying air is driven in the ring. In this case the silo or container acts as the separator. Light dust particles that are not separated in the silo or container initially remain in the circulation. With most materials the fine dust particles tend to attach themselves to the coarser ones and are thus separated with them. Hence, a concentration of the fine dust particles in the conveying stream is avoided as far as possible. The loading of the conveying stream essentially depends on the grain size, density and form of the material to be conveyed. As a guiding value, one may assume 250 - 300 g/m³. Higher loads are possible under certain conditions. In cases where there is a high amount of material, e.g. in planing works, where the splinters are directly removed and transported away for further use, this can also be realised with a ring system and several containers. Switchover takes place automatically when the container signals that it is full. Containers are exchanged during operation.

Alchemist single rotor rakes offer working widths of 3.30m. With the option of pivoting, fixed three-point linkage mounting to suit all your needs. The rakes have mechanical height adjustment via a crank, with the possibility of adjusting to the individual field conditions. For transport on the road, remove the arms and stow them on the space-saving holders. Designed for use on low horsepower tractors, but it still delivers considerable working width. Proves to be a popular choice among haymakers. Maintenance-friendly %100 domestic prodcution gearbox. Easy to adjust height Stronger arms Hydraulic design allows you to set the rake to different field conditions. Compact and light design that can be operated by smaller tractors

Mobile water jet cutting unit particularly suited for Defusing large-caliber fund munitions EOD (Explosive Ordnance Disposal) & IEDD (Improvised Explosive Device Disposal). Environmental exposure over the time has chemical and/or physical effects on ammunition & often leads to a critical in-situ situation of the UXO. Conventional Render Safe Procedure (RSP) is very often not feasible without contacting or shifting the UXO and therefore is considered as not secure. In such situations repeatedly it came to severe accidents with death tolls. Hence safety of transport to carry-off for final removal is also not given.Therefore in such cases blasting the UXO is so far used as a final RSP causing partly heavy collateral damages. This unit allows to remove or deactivate the fuse remotely, risk-free & safe by using the WAS Technology & specially designed manipulation systems. The deployment of this technology around the globe has become state of the art today and is an accepted RSP world-wide

Resistant and ecological with padding effect, sewed paper envelopes are suitable for professional transport, removals and domestic uses. Available in sheets. Uses: - packaging for transport of glass - protection of goods and items with sharp edges - protection of barrels

TECHNICAL SPECIFICATIONS : Film Material BOPP/СРР Film Density from 25 to 100 micrometres Bottom Width from 70mm to 200mm Upper Width from 200mm to 700mm Height: from 200mm to 1000mm Advantages of transparent perforated cone packages: Air exchange – due to the presence of holes in the package, a favourable microclimate is created for the storage and transportation of plants. Fast removal of excess moisture – products keep the freshness longer, and moisture does not accumulate in packaging. Wear resistance – the material has high strength and resistance to temperature changes. The convenience of packaging – plants can be packed as quickly and beautifully as possible in a package. Protection of a plant – the package gives a plant an optimum form and keeps it from mechanical damage. The minimum batch of delivery is 50 kg

This product is suitable for producers of flowers in pots (greenhouses, wholesalers). TECHNICAL SPECIFICATIONS : Film Material BOPP/СРР Film Density from 25 to 100 micrometres Bottom Width from 70mm to 200mm Upper Width from 200mm to 700mm Height: from 200mm to 1000mm Advantages of transparent perforated cone packages: Air exchange – due to the presence of holes in the package, a favourable microclimate is created for the storage and transportation of plants. Fast removal of excess moisture – products keep the freshness longer, and moisture does not accumulate in packaging. Wear resistance – the material has high strength and resistance to temperature changes. The convenience of packaging – plants can be packed as quickly and beautifully as possible in a package. Protection of a plant – the package gives a plant an optimum form and keeps it from mechanical damage. The minimum batch of delivery is 50 kg

Rotary valves have for function the distribution or the continuous dosing of pulverulent products. FORPLEX rotary valves was studied specially to be easily adapted to the base of reception hoppers, cyclones, crushers, pneumatic transport and dust removal captation devices... So they are the essential complement to any installation of grinding, pneumatic transport or classification. Using some size of rotary valves, FORPLEX can provide a solution to meet the most demanding powder properties

stoba ECM systems with adapted automation solutions for multishift operation System comprising proven standard modules Integrated process chain of transport, ECM, cleaning, drying and removal Expansion stages based on the production volume Achieving economic cycle times Layout adapted to space Process integration and support from a single source