Tool system - Import export

After chamfering with the ChamferCut technology, no additional processing is necessary. No need for a second cut, often required during the deformation-based deburring process for the removal of material build up. With the chamfering process, the exact chamfer form is cut. In contrast to deformation-based processes, the material structure is not affected. Thus, there is no negative impact on finishing after heat treatment (e. g. honing). The precision of this LMT Fette engineered process is undisputed. The quality of such chamfers defines a new standard – with maximum repetitive accuracy. The combination of these process benefits along with low tool costs makes the ChamferCut the most economic deburring and chamfering process on the market. Advantages: - 100% chamfer quality - Chamfer correction possible via machine control - High efficiency - Simple, cost-effective reconditioning - Module range 0.8 – 42

Precision handling for heavy loads From end-of-line, through rack handling, to automated storage: Lödige has complete control of all the materials handling processes required in the press shop — including tool handling and systems for improved tool maintenance. Your advantages using Lödige solutions in the press shop: Ergonomic tool maintenance Coil handling up to 40 t Safe provision of pressed components Lifting and tilting tables up to 40 t Connection to pressed component storage Linked materials handling systems

CNC-trolley, 4x CNC-tool holders wide 900 and 4x CNC-tool holders narrow 900, 1x top shelf, incl. inserts according to table, WxDxH 990x610x1450 mm

Cabinet for CNC-trolley, locking with cylinder lock, WxDxH 705x1003x1019 mm

CNC-trolley with 6x CNC-tool carrier 900, incl. inserts according to table, WxDxH 560x930x950 mm

CNC-trolley with 6x CNC-tool carrier 600, incl. inserts according to table, WxDxH 560x630x950 mm

CNC-trolley for tool carriers with 6x CNC-tool carrier 600, 1x metal shelf at the bottom, incl. CNC-inserts, WxDxH 630x900x860 mm 2 additional CNC-tool carriers can be ordered seperately

CNC-roller shutter cabinet T500 R 36-16 with plastic roller, 3x CNC-frames can be used inclined or flat, 1x shelf, incl. inserts according to table, WxDxH 1000x500x1950 mm

CNC-roller shutter cabinet T500 R 36-16 with plastic roller, 4x CNC-frames can be used inclined or flat, incl. inserts according to table, WxDxH 1000x500x1950 mm

CNC-table rack attachment (TAG) 4, 4 floors incl. inserts according to table WxDxH 575 x 375 x 525

CNC-table rack attachment TAG 2, 2 floors incl. inserts according to table WxDxH 575 x 375 x 300

CNC-roller shutter cabinet T500 R 36-16 with aluminium-roller, 4x CNC-frames can be used inclined or flat, incl. inserts according to table, WxDxH 1000x500x1950 mm

CNC-Cabinet with hinged doors, 2 doors 4x CNC-tool frames inclined, incl. inserts according to table, WxDxH 980x500x1838 mm

Cabinet for CNC-trolley, locking with cylinder lock, WxDxH 705x736x1019 mm

Driven tools form a further core area of EWS. More than 8,000 different tools are available at short notice. In addition to standard products like axial and angular heads, EWS offers swivel units, slot broaching tools, multiform tools and multi-spindle machines. There is just no limit. The tool clamping systems range from the classic collet chuck holder to Weldon and hydro extension to Capto, KM, ABS and HSK. The applications range from classic CNC lathes to highly complex turning milling centers. The rapid change system EWS-Varia has set a standard for a flexible modular system. With its safe handling and short change-over times, EWS-Varia ranks among the most successful systems in the market. This was impressively confirmed by the Innovation Award awarded by the German state of Baden-Württemberg in 2006. "Made in Germany" is of course guaranteed by EWS also for these tool systems.

EWS quality now available for Swiss-type lathes. This new development in driven tools is EWS's response to many customers' requests. The tool systems may appear straightforward at first sight, but their simplicity belies their performance. The design concentrates on the mounting and the spindle concentricity. The requirement profile was developed jointly with an American medical technology company which uses very small drill bits and requires extreme concentricity properties. The spindle bearing technology used with labyrinth seals sets new standards in this field, and is associated with a long service life. Provision has already been made for service. The service centres in Germany, China, Korea and the USA have already been trained in the system and are ready to respond without delay. Third-party brands can also be serviced there at any time. Download catalogue: PDF

EWS.PSC offers maximum stability and rigidity coupled with maximum flexibility. Significantly reduce your setup and changeover times while maintaining high mold flexibility. he EWS.PSC program includes a wide range of standard tools with PSC shank for milling spindles as well as tool systems with PSC spindle for lathes. Furthermore, tool holders with plate seat are available. The interface allows you to reduce the time spent measuring, setting up and changing tools. In addition, improved machine utilization can be achieved.

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.

We produce tools for sheet metal transformation up to dimensions 3200 x 1800 mm and weight 12 t. We manufacture over-aggressive tools, deep-drawing tools and transfer tools. We produce tools with built-in feed systems with embossed nuts, bolts, pins, bearing bushes and threaded units specially programmed and connected to the press. Everything can be seen in the gallery.